lkml.org 
[lkml]   [2023]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/7] ARM: dts: aspeed: mtmitchell: Add LEDs
Date
Use gpio-leds to configure GPIOW5 to GPIO_ACTIVE_HIGH and
GPIO_TRANSITORY flags as a bmc ready led. The GPIOW5 pin
is reset when watchdog timeout occurs.

Configure the GPIOS3 to GPIO_ACTIVE_HIGH as an identify led.

Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
---
.../dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
index b7c4f7cfad07..88693c2b2dbe 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
@@ -51,6 +51,19 @@
};
};

+ leds {
+ compatible = "gpio-leds";
+
+ bmc-ready {
+ gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH |
+ GPIO_TRANSITORY)>;
+ };
+
+ identify {
+ gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+ };
+ };
+
voltage_mon_reg: voltage-mon-regulator {
compatible = "regulator-fixed";
regulator-name = "ltc2497_reg";
--
2.17.1
\
 
 \ /
  Last update: 2023-10-05 15:59    [W:0.133 / U:2.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site