lkml.org 
[lkml]   [2023]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 3/3] PCI: tegra194: Use Mbps_to_icc() macro for setting icc speed
Date
PCIe speed returned by the PCIE_SPEED2MBS_ENC() macro is in Mbps. So
instead of converting it to MBps explicitly and using the MBps_to_icc()
macro, let's use the Mbps_to_icc() macro to pass the value directly.

Cc: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---

Changes in v4:

* No change

Changes in v3:

- New patch

drivers/pci/controller/dwc/pcie-tegra194.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 4bba31502ce1..5feac690e127 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -321,9 +321,9 @@ static void tegra_pcie_icc_set(struct tegra_pcie_dw *pcie)
speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, val);
width = FIELD_GET(PCI_EXP_LNKSTA_NLW, val);

- val = width * (PCIE_SPEED2MBS_ENC(pcie_link_speed[speed]) / BITS_PER_BYTE);
+ val = width * PCIE_SPEED2MBS_ENC(pcie_link_speed[speed]);

- if (icc_set_bw(pcie->icc_path, MBps_to_icc(val), 0))
+ if (icc_set_bw(pcie->icc_path, Mbps_to_icc(val), 0))
dev_err(pcie->dev, "can't set bw[%u]\n", val);

if (speed >= ARRAY_SIZE(pcie_gen_freq))
--
2.25.1
\
 
 \ /
  Last update: 2023-10-04 18:46    [W:0.488 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site