lkml.org 
[lkml]   [2023]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: linux-next: build failure after merge of the usb tree
From

On 10/4/2023 12:13 PM, Greg KH wrote:
> On Wed, Oct 04, 2023 at 01:22:47PM +1100, Stephen Rothwell wrote:
>> Hi all,
>>
>> After merging the usb tree, today's linux-next build (x86_64 allmodconfig)
>> failed like this:
>>
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:156:43: error: 'QPHY_V6_PCS_SW_RESET' undeclared here (not in a function); did you mean 'QPHY_V2_PCS_SW_RESET'?
>> 156 | [QPHY_SW_RESET] = QPHY_V6_PCS_SW_RESET,
>> | ^~~~~~~~~~~~~~~~~~~~
>> | QPHY_V2_PCS_SW_RESET
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:157:43: error: 'QPHY_V6_PCS_START_CONTROL' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_START_CONTROL'?
>> 157 | [QPHY_START_CTRL] = QPHY_V6_PCS_START_CONTROL,
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~
>> | QPHY_V3_PCS_START_CONTROL
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:158:43: error: 'QPHY_V6_PCS_PCS_STATUS1' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_PCS_STATUS1'?
>> 158 | [QPHY_PCS_STATUS] = QPHY_V6_PCS_PCS_STATUS1,
>> | ^~~~~~~~~~~~~~~~~~~~~~~
>> | QPHY_V5_PCS_PCS_STATUS1
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:159:43: error: 'QPHY_V6_PCS_POWER_DOWN_CONTROL' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_POWER_DOWN_CONTROL'?
>> 159 | [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V6_PCS_POWER_DOWN_CONTROL,
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> | QPHY_V3_PCS_POWER_DOWN_CONTROL
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:162:43: error: 'QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL'?
>> 162 | [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL,
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> | QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:163:44: error: 'QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR'?
>> 163 | [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> | QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:991:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG1'?
>> 991 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG1, 0xc4),
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>> 78 | .offset = o, \
>> | ^
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:992:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG2' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_LOCK_DETECT_CONFIG2'?
>> 992 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG2, 0x89),
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>> 78 | .offset = o, \
>> | ^
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:993:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG3' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG3'?
>> 993 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG3, 0x20),
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>> 78 | .offset = o, \
>> | ^
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:994:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG6' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG6'?
>> 994 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG6, 0x13),
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>> 78 | .offset = o, \
>> | ^
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:997:26: error: 'QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L'?
>> 997 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>> 78 | .offset = o, \
>> | ^
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:998:26: error: 'QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H'?
>> 998 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>> 78 | .offset = o, \
>> | ^
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:999:26: error: 'QPHY_V6_PCS_CDR_RESET_TIME' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_CDR_RESET_TIME'?
>> 999 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_CDR_RESET_TIME, 0x0a),
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>> 78 | .offset = o, \
>> | ^
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1000:26: error: 'QPHY_V6_PCS_ALIGN_DETECT_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_ALIGN_DETECT_CONFIG1'?
>> 1000 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG1, 0x88),
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>> 78 | .offset = o, \
>> | ^
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1001:26: error: 'QPHY_V6_PCS_ALIGN_DETECT_CONFIG2' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_ALIGN_DETECT_CONFIG2'?
>> 1001 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG2, 0x13),
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>> 78 | .offset = o, \
>> | ^
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1003:26: error: 'QPHY_V6_PCS_EQ_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_EQ_CONFIG1'?
>> 1003 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG1, 0x4b),
>> | ^~~~~~~~~~~~~~~~~~~~~~
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>> 78 | .offset = o, \
>> | ^
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1004:26: error: 'QPHY_V6_PCS_EQ_CONFIG5' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_EQ_CONFIG5'?
>> 1004 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG5, 0x10),
>> | ^~~~~~~~~~~~~~~~~~~~~~
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>> 78 | .offset = o, \
>> | ^
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1008:26: error: 'QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL'?
>> 1008 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>> 78 | .offset = o, \
>> | ^
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1009:26: error: 'QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2'?
>> 1009 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>> 78 | .offset = o, \
>> | ^
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1010:26: error: 'QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_L'?
>> 1010 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>> 78 | .offset = o, \
>> | ^
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1011:26: error: 'QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H'?
>> 1011 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
>> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
>> 78 | .offset = o, \
>> | ^
>>
>> Caused by commit
>>
>> 685dbd1b2306 ("phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support")
>>
>> I have used the usb tree from next-20231003 for today.
> Thanks, I've now reverted this from my tree.
As mentioned in the cover letter of these changes, the series was
dependent on the other submitted series [1], [2].

Can you also pick these series [1], [2] to resolve this build failures.
[1]
https://lore.kernel.org/all/20230911203842.778411-1-dmitry.baryshkov@linaro.org/
[2]
https://lore.kernel.org/linux-phy/20230824211952.1397699-1-dmitry.baryshkov@linaro.org/

Thanks,
Rohit.
>
> greg k-h

\
 
 \ /
  Last update: 2023-10-04 08:56    [W:0.084 / U:1.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site