lkml.org 
[lkml]   [2023]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 3/3] clk: qcom: add SM8550 DISPCC driver
<neil.armstrong@linaro.org> 于2023年10月3日周二 15:16写道:
>
> Hi,
>
> On 03/10/2023 04:17, Sophon Wu wrote:
> > On 09/01/2023 16:47, Neil Armstrong wrote:
> >
> >> Add support for the display clock controller found in SM8550
> >> based devices.
> >
> >> This clock controller feeds the Multimedia Display SubSystem (MDSS).
> >> This driver is based on the SM8450 support.
> >
> >> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> >> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> >> ---
> >
> > Hi Neil,
> >
> > I'm trying to enable display on SM8550 but having trouble with clocks. Do you
> > have any idea on this maybe? Full dmesg here: https://bpa.st/7E6Q
>
> You may need to remove the cont-splash memory zone and the simple-framebuffer,
> if you leave the cont-splash the bootloader will leave the MDSS on and Linux
> will fail to take over and initialize the clocks.
>
> This is known issue, and for now we re-initialize everything from Linux after
> ABL disables the display subsystem entirely.
>
> Neil

It works! Thanks a lot for the tip.

Regards,
Xilin

\
 
 \ /
  Last update: 2023-10-03 11:23    [W:0.086 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site