lkml.org 
[lkml]   [2023]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] arm64: dts: qcom: ipq9574: enable GPIO based LED
From
On 25/10/2023 08:58, Kathiravan Thirumoorthy wrote:
> Add support for wlan-2g LED on GPIO64.
>
> Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> index 49c9b6478357..b6f90da31778 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi
> @@ -51,6 +51,18 @@ button-wps {
> debounce-interval = <60>;
> };
> };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-0 = <&gpio_leds_default>;
> + pinctrl-names = "default";
> +
> + led-0 {
> + gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "phy0tx";
> + default-state = "off";

Missing function and color.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2023-10-25 09:03    [W:0.046 / U:2.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site