lkml.org 
[lkml]   [2023]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v7 2/3] clocksource: Add JH7110 timer driver
From

Hi Xingyu,


On 19/10/2023 07:35, Xingyu Wu wrote:
> Add timer driver for the StarFive JH7110 SoC.

As it is a new timer, please add a proper nice description explaining
the timer hardware, thanks.

> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
> ---
> MAINTAINERS | 7 +
> drivers/clocksource/Kconfig | 11 +
> drivers/clocksource/Makefile | 1 +
> drivers/clocksource/timer-jh7110.c | 380 +++++++++++++++++++++++++++++
> 4 files changed, 399 insertions(+)
> create mode 100644 drivers/clocksource/timer-jh7110.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7a7bd8bd80e9..91c09b399131 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20473,6 +20473,13 @@ S: Maintained
> F: Documentation/devicetree/bindings/sound/starfive,jh7110-tdm.yaml
> F: sound/soc/starfive/jh7110_tdm.c
>
> +STARFIVE JH7110 TIMER DRIVER
> +M: Samin Guo <samin.guo@starfivetech.com>
> +M: Xingyu Wu <xingyu.wu@starfivetech.com>
> +S: Supported
> +F: Documentation/devicetree/bindings/timer/starfive,jh7110-timer.yaml
> +F: drivers/clocksource/timer-jh7110.c
> +
> STARFIVE JH71X0 CLOCK DRIVERS
> M: Emil Renner Berthing <kernel@esmil.dk>
> M: Hal Feng <hal.feng@starfivetech.com>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index 0ba0dc4ecf06..821abcc1e517 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -641,6 +641,17 @@ config RISCV_TIMER
> is accessed via both the SBI and the rdcycle instruction. This is
> required for all RISC-V systems.
>
> +config STARFIVE_JH7110_TIMER
> + bool "Timer for the STARFIVE JH7110 SoC"
> + depends on ARCH_STARFIVE || COMPILE_TEST

You may want to use ARCH_STARFIVE only if the platform can make this
timer optional. Otherwise, set the option from the platform Kconfig and
put the bool "bla bla" if COMPILE_TEST

> + select TIMER_OF
> + select CLKSRC_MMIO
> + default ARCH_STARFIVE

no "default"

> + help
> + This enables the timer for StarFive JH7110 SoC. On RISC-V platform,
> + the system has started RISCV_TIMER, but you can also use this timer
> + which can provide four channels to do a lot more things on JH7110 SoC.
> +
> config CLINT_TIMER
> bool "CLINT Timer for the RISC-V platform" if COMPILE_TEST
> depends on GENERIC_SCHED_CLOCK && RISCV
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index 368c3461dab8..b66ac05ec086 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -80,6 +80,7 @@ obj-$(CONFIG_INGENIC_TIMER) += ingenic-timer.o
> obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o
> obj-$(CONFIG_X86_NUMACHIP) += numachip.o
> obj-$(CONFIG_RISCV_TIMER) += timer-riscv.o
> +obj-$(CONFIG_STARFIVE_JH7110_TIMER) += timer-jh7110.o
> obj-$(CONFIG_CLINT_TIMER) += timer-clint.o
> obj-$(CONFIG_CSKY_MP_TIMER) += timer-mp-csky.o
> obj-$(CONFIG_GX6605S_TIMER) += timer-gx6605s.o
> diff --git a/drivers/clocksource/timer-jh7110.c b/drivers/clocksource/timer-jh7110.c
> new file mode 100644
> index 000000000000..71de29a3ec91
> --- /dev/null
> +++ b/drivers/clocksource/timer-jh7110.c
> @@ -0,0 +1,380 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Starfive JH7110 Timer driver
> + *
> + * Copyright (C) 2022-2023 StarFive Technology Co., Ltd.
> + *
> + * Author:
> + * Xingyu Wu <xingyu.wu@starfivetech.com>
> + * Samin Guo <samin.guo@starfivetech.com>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clockchips.h>
> +#include <linux/clocksource.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/irq.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/sched_clock.h>

Please double check the headers and remove the pointless ones.


> +/* Bias: Ch0-0x0, Ch1-0x40, Ch2-0x80, and so on. */
> +#define JH7110_TIMER_CH_LEN 0x40
> +#define JH7110_TIMER_CH_BASE(x) ((x) * JH7110_TIMER_CH_LEN)
> +#define JH7110_TIMER_CH_MAX 4
> +
> +#define JH7110_CLOCK_SOURCE_RATING 200
> +#define JH7110_VALID_BITS 32
> +#define JH7110_DELAY_US 0
> +#define JH7110_TIMEOUT_US 10000
> +#define JH7110_CLOCKEVENT_RATING 300
> +#define JH7110_TIMER_MAX_TICKS 0xffffffff
> +#define JH7110_TIMER_MIN_TICKS 0xf
> +#define JH7110_TIMER_RELOAD_VALUE 0
> +
> +#define JH7110_TIMER_INT_STATUS 0x00 /* RO[0:4]: Interrupt Status for channel0~4 */
> +#define JH7110_TIMER_CTL 0x04 /* RW[0]: 0-continuous run, 1-single run */
> +#define JH7110_TIMER_LOAD 0x08 /* RW: load value to counter */
> +#define JH7110_TIMER_ENABLE 0x10 /* RW[0]: timer enable register */
> +#define JH7110_TIMER_RELOAD 0x14 /* RW: write 1 or 0 both reload counter */
> +#define JH7110_TIMER_VALUE 0x18 /* RO: timer value register */
> +#define JH7110_TIMER_INT_CLR 0x20 /* RW: timer interrupt clear register */
> +#define JH7110_TIMER_INT_MASK 0x24 /* RW[0]: timer interrupt mask register */
> +
> +#define JH7110_TIMER_INT_CLR_ENA BIT(0)
> +#define JH7110_TIMER_INT_CLR_AVA_MASK BIT(1)
> +
> +struct jh7110_clkevt {
> + struct clock_event_device evt;
> + struct clocksource cs;
> + bool cs_is_valid;
> + struct clk *clk;
> + struct reset_control *rst;
> + u32 rate;
> + u32 reload_val;
> + void __iomem *base;
> + char name[sizeof("jh7110-timer.chX")];
> +};
> +
> +struct jh7110_timer_priv {
> + struct clk *pclk;
> + struct reset_control *prst;
> + struct jh7110_clkevt clkevt[JH7110_TIMER_CH_MAX];

Why do you need several clock events and clock sources ?

[ ... ]


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2023-10-24 16:58    [W:0.125 / U:1.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site