lkml.org 
[lkml]   [2023]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/2] x86/apic: Allow reprogramming IOAPIC pins the first time for non-legacy IRQs
From
On 10/19/2023 22:38, Mario Limonciello wrote:
> If the system is set up without legacy IRQs configured
> acpi_register_gsi_ioapic() still needs to be able to program the IOAPIC
> to match the values from _CRS which might not match what is already
> programmed to the IOAPIC.
>
> Reported-by: dlazar@gmail.com
> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218003
> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
> arch/x86/kernel/apic/io_apic.c | 8 ++------
> 1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
> index 00da6cf6b07d..27dd279dcc7b 100644
> --- a/arch/x86/kernel/apic/io_apic.c
> +++ b/arch/x86/kernel/apic/io_apic.c
> @@ -928,12 +928,8 @@ static bool mp_check_pin_attr(int irq, struct irq_alloc_info *info)
> {
> struct mp_chip_data *data = irq_get_chip_data(irq);
>
> - /*
> - * setup_IO_APIC_irqs() programs all legacy IRQs with default trigger
> - * and polarity attributes. So allow the first user to reprogram the
> - * pin with real trigger and polarity attributes.
> - */
> - if (irq < nr_legacy_irqs() && data->count == 1) {
> + /* allow the first user to reprogram the pin with real trigger and polarity */
> + if (data->count == 1) {
> if (info->ioapic.is_level != data->is_level)
> mp_register_handler(irq, info->ioapic.is_level);
> data->entry.is_level = data->is_level = info->ioapic.is_level;

David mentioned it on the Bugzilla, but for the benefit of those not
looking there, this series is confirmed to fix the problem.

\
 
 \ /
  Last update: 2023-10-23 15:28    [W:0.042 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site