lkml.org 
[lkml]   [2023]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v13 09/10] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports
From


On 10/23/2023 9:53 PM, Johan Hovold wrote:
> On Sat, Oct 07, 2023 at 09:18:05PM +0530, Krishna Kurapati wrote:
>> Enable tertiary controller for SA8295P (based on SC8280XP).
>> Add pinctrl support for usb ports to provide VBUS to connected peripherals.
>>
>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
>> ---
>> arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 49 ++++++++++++++++++++++++
>> 1 file changed, 49 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
>> index fd253942e5e5..271000163823 100644
>> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
>> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
>> @@ -9,6 +9,7 @@
>> #include <dt-bindings/gpio/gpio.h>
>> #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>> #include <dt-bindings/spmi/spmi.h>
>> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
>
> Sort order ('p' < 'r').

ACK

>
>> +&usb_2 {
>> + pinctrl-0 = <&usb2_en_state>,
>> + <&usb3_en_state>,
>> + <&usb4_en_state>,
>> + <&usb5_en_state>;
>> + pinctrl-names = "default";
>> +
>> + status = "okay";
>> +};
>> +
>> &usb_2_hsphy0 {
>> vdda-pll-supply = <&vreg_l5a>;
>> vdda18-supply = <&vreg_l7g>;
>> @@ -729,3 +740,41 @@ wake-n-pins {
>> };
>> };
>> };
>> +
>> +&pmm8540c_gpios {
>
> Sort order here too ('p' < 't' in "&tlmm").
>

ACK.

>> + usb2_en_state: usb2-en-state {
>
> No need to include '_state' in the labels.
>
Any specific reason ? I have no problem if removing the suffix but just
wanted to know the reason.

Regards,
Krishna,

\
 
 \ /
  Last update: 2023-10-23 19:43    [W:0.094 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site