lkml.org 
[lkml]   [2023]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 2/4] usb: ucsi: glink: use the connector orientation GPIO to provide switch events
On Mon, 2 Oct 2023 at 13:21, Neil Armstrong <neil.armstrong@linaro.org> wrote:
>
> On SM8550, the non-altmode orientation is not given anymore within
> altmode events, even with USB SVIDs events.
>
> On the other side, the Type-C connector orientation is correctly
> reported by a signal from the PMIC.
>
> Take this gpio signal when we detect some Type-C port activity
> to notify any Type-C switches tied to the Type-C port connectors.

Have you checked, which UCSI version is implemented on SM8550?
Is there any chance of GET_CONNECTOR_STATUS / bit 86 actually
reflecting the correct orientation?

>
> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---


--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2023-10-02 19:27    [W:0.087 / U:1.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site