Messages in this thread | | | Date | Tue, 17 Oct 2023 18:37:32 +0530 | Subject | Re: [PATCH V3 4/4] arm64: dts: qcom: ipq5018: Add tsens node | From | Sricharan Ramabadhran <> |
| |
On 10/5/2023 12:38 AM, Robert Marko wrote: > > On 22. 09. 2023. 13:51, Sricharan R wrote: >> From: Sricharan Ramabadhran <quic_srichara@quicinc.com> >> >> IPQ5018 has tsens V1.0 IP with 4 sensors. >> There is no RPM, so tsens has to be manually enabled. Adding the tsens >> and nvmem node and IPQ5018 has 4 thermal sensors (zones). With the >> critical temperature being 120'C and action is to reboot. Adding all >> the 4 zones here. >> >> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> >> --- >> [v3] Ordered the qfprom device node properties as per >> Krzysztof's comments >> >> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 169 ++++++++++++++++++++++++++ >> 1 file changed, 169 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> index 9f13d2dcdfd5..9e28b54ebcbd 100644 >> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi >> @@ -93,6 +93,117 @@ soc: soc@0 { >> #size-cells = <1>; >> ranges = <0 0 0 0xffffffff>; >> + qfprom: qfprom@a0000 { >> + compatible = "qcom,ipq5018-qfprom", "qcom,qfprom"; > Hi, > > "qcom,ipq5018-qfprom" needs to be documented in QFPROM bindings first.
Already posted here [1]. Initially had it in the same series, but kept it separately based on review comments.
[1] https://www.spinics.net/lists/devicetree/msg633408.html
Regards, Sricharan
| |