lkml.org 
[lkml]   [2023]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v3 09/73] gpio: mvebu: use new pinctrl GPIO helpers
    Date
    From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

    Replace the pinctrl helpers taking the global GPIO number as argument
    with the improved variants that instead take a pointer to the GPIO chip
    and the controller-relative offset.

    Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
    Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    ---
    drivers/gpio/gpio-mvebu.c | 4 ++--
    1 file changed, 2 insertions(+), 2 deletions(-)

    diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
    index e5f2c2d2a721..c0ca0aa7b5cd 100644
    --- a/drivers/gpio/gpio-mvebu.c
    +++ b/drivers/gpio/gpio-mvebu.c
    @@ -346,7 +346,7 @@ static int mvebu_gpio_direction_input(struct gpio_chip *chip, unsigned int pin)
    * Check with the pinctrl driver whether this pin is usable as
    * an input GPIO
    */
    - ret = pinctrl_gpio_direction_input(chip->base + pin);
    + ret = pinctrl_gpio_direction_input_new(chip, pin);
    if (ret)
    return ret;

    @@ -366,7 +366,7 @@ static int mvebu_gpio_direction_output(struct gpio_chip *chip, unsigned int pin,
    * Check with the pinctrl driver whether this pin is usable as
    * an output GPIO
    */
    - ret = pinctrl_gpio_direction_output(chip->base + pin);
    + ret = pinctrl_gpio_direction_output_new(chip, pin);
    if (ret)
    return ret;

    --
    2.39.2
    \
     
     \ /
      Last update: 2023-10-17 14:05    [W:4.513 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site