lkml.org 
[lkml]   [2023]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH][next] thermal: lvts: make some read-only arrays static const
From

Hi Colin,

On 17/10/2023 19:16, Colin Ian King wrote:
> Don't populate the read-only arrays on the stack, instead make them
> static const.

Why ?

> Make lvts_write_config parameters cmds and nr_cmds
> const too.
>
> Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
> ---
> drivers/thermal/mediatek/lvts_thermal.c | 11 ++++++-----
> 1 file changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
> index 877a0e5ac3fd..b20e69cb466f 100644
> --- a/drivers/thermal/mediatek/lvts_thermal.c
> +++ b/drivers/thermal/mediatek/lvts_thermal.c
> @@ -308,7 +308,7 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
>
> static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl)
> {
> - u32 masks[] = {
> + static const u32 masks[] = {
> LVTS_MONINT_OFFSET_SENSOR0,
> LVTS_MONINT_OFFSET_SENSOR1,
> LVTS_MONINT_OFFSET_SENSOR2,
> @@ -400,7 +400,7 @@ static irqreturn_t lvts_ctrl_irq_handler(struct lvts_ctrl *lvts_ctrl)
> {
> irqreturn_t iret = IRQ_NONE;
> u32 value;
> - u32 masks[] = {
> + static const u32 masks[] = {
> LVTS_INT_SENSOR0,
> LVTS_INT_SENSOR1,
> LVTS_INT_SENSOR2,
> @@ -781,7 +781,7 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
> * each write in the configuration register must be separated by a
> * delay of 2 us.
> */
> -static void lvts_write_config(struct lvts_ctrl *lvts_ctrl, u32 *cmds, int nr_cmds)
> +static void lvts_write_config(struct lvts_ctrl *lvts_ctrl, const u32 *cmds, const int nr_cmds)
> {
> int i;
>
> @@ -865,7 +865,8 @@ static int lvts_ctrl_set_enable(struct lvts_ctrl *lvts_ctrl, int enable)
>
> static int lvts_ctrl_connect(struct device *dev, struct lvts_ctrl *lvts_ctrl)
> {
> - u32 id, cmds[] = { 0xC103FFFF, 0xC502FF55 };
> + u32 id;
> + static const u32 cmds[] = { 0xC103FFFF, 0xC502FF55 };
>
> lvts_write_config(lvts_ctrl, cmds, ARRAY_SIZE(cmds));
>
> @@ -889,7 +890,7 @@ static int lvts_ctrl_initialize(struct device *dev, struct lvts_ctrl *lvts_ctrl)
> /*
> * Write device mask: 0xC1030000
> */
> - u32 cmds[] = {
> + static const u32 cmds[] = {
> 0xC1030E01, 0xC1030CFC, 0xC1030A8C, 0xC103098D, 0xC10308F1,
> 0xC10307A6, 0xC10306B8, 0xC1030500, 0xC1030420, 0xC1030300,
> 0xC1030030, 0xC10300F6, 0xC1030050, 0xC1030060, 0xC10300AC,

--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2023-10-17 19:54    [W:0.035 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site