lkml.org 
[lkml]   [2023]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 1/2] dt-bindings: i2c: mv64xxx: add reset-gpios property
From
On 16/10/2023 04:35, Chris Packham wrote:
> Add reset-gpios and reset-delay-us properties to the marvell,mv64xxx-i2c
> binding. These can be used to describe hardware where a common reset
> GPIO is connected to all downstream devices on and I2C bus. This reset
> will be released before the downstream devices on the bus are probed.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
>
> Notes:
> Changes in v2:
> - Update commit message
> - Add reset-delay-us property
>
> .../devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
> index 461d1c9ee3f7..7223797b0572 100644
> --- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
> @@ -70,6 +70,12 @@ properties:
> resets:
> maxItems: 1
>
> + reset-gpios:
> + maxItems: 1
> +
> + reset-delay-us:
> + description: Delay in us to wait after reset gpio de-assertion.

Add:
default: XXXX


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2023-10-16 07:25    [W:0.090 / U:0.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site