lkml.org 
[lkml]   [2023]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v14 1/9] x86/resctrl: Add multiple tasks to the resctrl group at once
Date
The resctrl task assignment for monitor or control group needs to be
done one at a time. For example:

$mount -t resctrl resctrl /sys/fs/resctrl/
$mkdir /sys/fs/resctrl/ctrl_grp1
$echo 123 > /sys/fs/resctrl/ctrl_grp1/tasks
$echo 456 > /sys/fs/resctrl/ctrl_grp1/tasks
$echo 789 > /sys/fs/resctrl/ctrl_grp1/tasks

This is not user-friendly when dealing with hundreds of tasks.

Support multiple task assignment in one command with tasks ids separated
by commas. For example:
$echo 123,456,789 > /sys/fs/resctrl/ctrl_grp1/tasks

Signed-off-by: Babu Moger <babu.moger@amd.com>
Tested-by: Peter Newman <peternewman@google.com>
Reviewed-by: Peter Newman <peternewman@google.com>
Tested-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Tan Shaopeng <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
v14: No changes

v13: No changes

v12: No changes
---
Documentation/arch/x86/resctrl.rst | 9 ++++++++-
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 25 ++++++++++++++++++++++---
2 files changed, 30 insertions(+), 4 deletions(-)

diff --git a/Documentation/arch/x86/resctrl.rst b/Documentation/arch/x86/resctrl.rst
index 4c6421e2aa31..178ab1d8f747 100644
--- a/Documentation/arch/x86/resctrl.rst
+++ b/Documentation/arch/x86/resctrl.rst
@@ -306,7 +306,14 @@ All groups contain the following files:
"tasks":
Reading this file shows the list of all tasks that belong to
this group. Writing a task id to the file will add a task to the
- group. If the group is a CTRL_MON group the task is removed from
+ group. Multiple tasks can be added by separating the task ids
+ with commas. Tasks will be assigned sequentially. Multiple
+ failures are not supported. A single failure encountered while
+ attempting to assign a task will cause the operation to abort and
+ already added tasks before the failure will remain in the group.
+ Failures will be logged to /sys/fs/resctrl/info/last_cmd_status.
+
+ If the group is a CTRL_MON group the task is removed from
whichever previous CTRL_MON group owned the task and also from
any MON group that owned the task. If the group is a MON group,
then the task must already belong to the CTRL_MON parent of this
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 09848ff11f7b..fe239691628a 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -696,11 +696,10 @@ static ssize_t rdtgroup_tasks_write(struct kernfs_open_file *of,
char *buf, size_t nbytes, loff_t off)
{
struct rdtgroup *rdtgrp;
+ char *pid_str;
int ret = 0;
pid_t pid;

- if (kstrtoint(strstrip(buf), 0, &pid) || pid < 0)
- return -EINVAL;
rdtgrp = rdtgroup_kn_lock_live(of->kn);
if (!rdtgrp) {
rdtgroup_kn_unlock(of->kn);
@@ -715,7 +714,27 @@ static ssize_t rdtgroup_tasks_write(struct kernfs_open_file *of,
goto unlock;
}

- ret = rdtgroup_move_task(pid, rdtgrp, of);
+ while (buf && buf[0] != '\0' && buf[0] != '\n') {
+ pid_str = strim(strsep(&buf, ","));
+
+ if (kstrtoint(pid_str, 0, &pid)) {
+ rdt_last_cmd_printf("Task list parsing error pid %s\n", pid_str);
+ ret = -EINVAL;
+ break;
+ }
+
+ if (pid < 0) {
+ rdt_last_cmd_printf("Invalid pid %d\n", pid);
+ ret = -EINVAL;
+ break;
+ }
+
+ ret = rdtgroup_move_task(pid, rdtgrp, of);
+ if (ret) {
+ rdt_last_cmd_printf("Error while processing task %d\n", pid);
+ break;
+ }
+ }

unlock:
rdtgroup_kn_unlock(of->kn);
--
2.34.1
\
 
 \ /
  Last update: 2023-10-17 02:24    [W:0.090 / U:26.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site