lkml.org 
[lkml]   [2023]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH RFT v8 4/6] ARM: pxa: Convert reset driver to GPIO descriptors
The PXA reset driver still uses the legacy GPIO interface for
configuring and asserting the reset pin.

Convert it to use the GPIO descriptor interface.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
arch/arm/mach-pxa/reset.c | 39 +++++++++++++--------------------------
arch/arm/mach-pxa/reset.h | 3 +--
arch/arm/mach-pxa/spitz.c | 6 +++++-
3 files changed, 19 insertions(+), 29 deletions(-)

diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 27293549f8ad..08bc104b9411 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -2,7 +2,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/io.h>
#include <asm/proc-fns.h>
#include <asm/system_misc.h>
@@ -14,33 +14,20 @@

static void do_hw_reset(void);

-static int reset_gpio = -1;
+static struct gpio_desc *reset_gpio;

-int init_gpio_reset(int gpio, int output, int level)
+int init_gpio_reset(int output, int level)
{
- int rc;
-
- rc = gpio_request(gpio, "reset generator");
- if (rc) {
- printk(KERN_ERR "Can't request reset_gpio\n");
- goto out;
+ reset_gpio = gpiod_get(NULL, "reset", GPIOD_ASIS);
+ if (IS_ERR(reset_gpio)) {
+ pr_err("Can't request reset_gpio: %pe\n", reset_gpio);
+ return PTR_ERR(reset_gpio);
}

if (output)
- rc = gpio_direction_output(gpio, level);
+ return gpiod_direction_output(reset_gpio, level);
else
- rc = gpio_direction_input(gpio);
- if (rc) {
- printk(KERN_ERR "Can't configure reset_gpio\n");
- gpio_free(gpio);
- goto out;
- }
-
-out:
- if (!rc)
- reset_gpio = gpio;
-
- return rc;
+ return gpiod_direction_input(reset_gpio);
}

/*
@@ -50,16 +37,16 @@ int init_gpio_reset(int gpio, int output, int level)
*/
static void do_gpio_reset(void)
{
- BUG_ON(reset_gpio == -1);
+ BUG_ON(IS_ERR(reset_gpio));

/* drive it low */
- gpio_direction_output(reset_gpio, 0);
+ gpiod_direction_output(reset_gpio, 0);
mdelay(2);
/* rising edge or drive high */
- gpio_set_value(reset_gpio, 1);
+ gpiod_set_value(reset_gpio, 1);
mdelay(2);
/* falling edge */
- gpio_set_value(reset_gpio, 0);
+ gpiod_set_value(reset_gpio, 0);

/* give it some time */
mdelay(10);
diff --git a/arch/arm/mach-pxa/reset.h b/arch/arm/mach-pxa/reset.h
index 963dd190bc13..5864f61a0e94 100644
--- a/arch/arm/mach-pxa/reset.h
+++ b/arch/arm/mach-pxa/reset.h
@@ -13,10 +13,9 @@ extern void pxa_register_wdt(unsigned int reset_status);

/**
* init_gpio_reset() - register GPIO as reset generator
- * @gpio: gpio nr
* @output: set gpio as output instead of input during normal work
* @level: output level
*/
-extern int init_gpio_reset(int gpio, int output, int level);
+extern int init_gpio_reset(int output, int level);

#endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index b72c2916426a..acb2b5495dbe 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -1020,9 +1020,13 @@ static void spitz_restart(enum reboot_mode mode, const char *cmd)
spitz_poweroff();
}

+GPIO_LOOKUP_SINGLE(spitz_reset_gpio_table, NULL, "pxa-gpio",
+ SPITZ_GPIO_ON_RESET, "reset", GPIO_ACTIVE_HIGH);
+
static void __init spitz_init(void)
{
- init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
+ gpiod_add_lookup_table(&spitz_reset_gpio_table);
+ init_gpio_reset(1, 0);
pm_power_off = spitz_poweroff;

PMCR = 0x00;
--
2.42.0


\
 
 \ /
  Last update: 2023-10-11 15:25    [W:1.370 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site