lkml.org 
[lkml]   [2023]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[RFC PATCH 0/3] Add HiSilicon system timer driver
    Date
    From: Yicong Yang <yangyicong@hisilicon.com>

    HiSilicon system timer is a memory mapped platform timer compatible with
    the arm's generic timer specification. The timer supports both SPI and
    LPI interrupt and can be enumerated through ACPI DSDT table. Since the
    timer is fully compatible with the spec, it can reuse most codes of the
    arm_arch_timer driver. However since the arm_arch_timer driver only
    supports GTDT and SPI interrupt, this series support the HiSilicon system
    timer by:

    - refactor some of the arm_arch_timer codes and export the function to
    register a arch memory timer by other drivers
    - retrieve the IO memory and interrupt resource through DSDT in a separate
    driver, then setup and register the clockevent device reuse the arm_arch_timer
    function

    Using LPI for the timer is mentioned in BSA Spec section 3.8.1 (DEN0094C 1.0C).

    Yicong Yang (3):
    clocksource/drivers/arm_arch_timer: Split the function of
    __arch_timer_setup()
    clocksource/drivers/arm_arch_timer: Extend and export
    arch_timer_mem_register()
    clocksource/drivers: Add HiSilicon system timer driver

    drivers/clocksource/Kconfig | 10 +++
    drivers/clocksource/Makefile | 1 +
    drivers/clocksource/arm_arch_timer.c | 123 +++++++++++++++------------
    drivers/clocksource/timer-hisi-sys.c | 68 +++++++++++++++
    include/clocksource/arm_arch_timer.h | 2 +
    5 files changed, 148 insertions(+), 56 deletions(-)
    create mode 100644 drivers/clocksource/timer-hisi-sys.c

    --
    2.24.0

    \
     
     \ /
      Last update: 2023-10-10 14:34    [W:4.109 / U:0.020 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site