lkml.org 
[lkml]   [2023]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESEND2,v4,2/2] drm/meson: dw-hdmi: Use devm_regulator_*get_enable*()
On 09/01/2023 14:46, Marek Szyprowski wrote:
> Hi Matti,
>
> On 30.11.2022 10:23, Matti Vaittinen wrote:
>> Simplify using the devm_regulator_get_enable_optional(). Also drop the
>> now unused struct member 'hdmi_supply'.
>>
>> Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
>> Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>> ---
>> v4 resend 2:
>> Respinning unchanged code with the commit title changed as wa suggested
>> by Robert Foss and commit message changed as was suggested by Martin.
>>
>> I am doing a clean-up for my local git and encountered this one.
>> Respinning as it seems this one fell through the cracks.
>> ---
>> drivers/gpu/drm/meson/meson_dw_hdmi.c | 23 +++--------------------
>> 1 file changed, 3 insertions(+), 20 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c
>> index 5cd2b2ebbbd3..7642f740272b 100644
>> --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
>> +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
>> @@ -140,7 +140,6 @@ struct meson_dw_hdmi {
>> struct reset_control *hdmitx_apb;
>> struct reset_control *hdmitx_ctrl;
>> struct reset_control *hdmitx_phy;
>> - struct regulator *hdmi_supply;
>> u32 irq_stat;
>> struct dw_hdmi *hdmi;
>> struct drm_bridge *bridge;
>> @@ -665,11 +664,6 @@ static void meson_dw_hdmi_init(struct meson_dw_hdmi *meson_dw_hdmi)
>>
>> }
>>
>> -static void meson_disable_regulator(void *data)
>> -{
>> - regulator_disable(data);
>> -}
>> -
>> static void meson_disable_clk(void *data)
>> {
>> clk_disable_unprepare(data);
>> @@ -723,20 +717,9 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,
>> meson_dw_hdmi->data = match;
>> dw_plat_data = &meson_dw_hdmi->dw_plat_data;
>>
>> - meson_dw_hdmi->hdmi_supply = devm_regulator_get_optional(dev, "hdmi");
>> - if (IS_ERR(meson_dw_hdmi->hdmi_supply)) {
>> - if (PTR_ERR(meson_dw_hdmi->hdmi_supply) == -EPROBE_DEFER)
>> - return -EPROBE_DEFER;
>> - meson_dw_hdmi->hdmi_supply = NULL;
>> - } else {
>> - ret = regulator_enable(meson_dw_hdmi->hdmi_supply);
>> - if (ret)
>> - return ret;
>> - ret = devm_add_action_or_reset(dev, meson_disable_regulator,
>> - meson_dw_hdmi->hdmi_supply);
>> - if (ret)
>> - return ret;
>> - }
>> + ret = devm_regulator_get_enable_optional(dev, "hdmi");
>> + if (ret != -ENODEV)
>
> The above line should be "if (ret < 0)", otherwise it breaks hdmi support.
>
> I've noticed this once this change has been merged to linux-next and all
> my Amlogic Meson based boards failed to initialize HDMI. Is it possible
> to fix this in drm tree or do I need to send the incremental fixup?

Nop, please send an incremental fix and I'll apply it asap.

Thanks,
Neil


>
>> + return ret;
>>
>> meson_dw_hdmi->hdmitx_apb = devm_reset_control_get_exclusive(dev,
>> "hdmitx_apb");
>
> Best regards

\
 
 \ /
  Last update: 2023-03-26 23:33    [W:0.076 / U:0.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site