lkml.org 
[lkml]   [2023]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 3/3] ARM: dts: imx7d-remarkable2: Enable the rohm,bd71815
On Tue, Dec 20, 2022 at 11:17 PM Marco Felsch <m.felsch@pengutronix.de> wrote:
>
> Hi Alistair,
>
> thanks for your patch, please see below.
>
> On 22-12-20, Alistair Francis wrote:
> > Add support for the rohm,bd71815 power controller controller for the
> > reMarkable 2.
> >
> > Signed-off-by: Alistair Francis <alistair@alistair23.me>
> > ---
> > arch/arm/boot/dts/imx7d-remarkable2.dts | 159 ++++++++++++++++++++++++
> > 1 file changed, 159 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
> > index a138b292ec6a..4387d30d6180 100644
> > --- a/arch/arm/boot/dts/imx7d-remarkable2.dts
> > +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
> > @@ -92,6 +92,10 @@ wifi_pwrseq: wifi_pwrseq {
> > };
> > };
> >
> > +&cpu0 {
> > + cpu-supply = <&buck1_reg>;
> > +};
> > +
> > &clks {
> > assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
> > <&clks IMX7D_CLKO2_ROOT_DIV>;
> > @@ -119,6 +123,148 @@ wacom_digitizer: digitizer@9 {
> > };
> > };
> >
> > +&i2c2 {
> > + clock-frequency = <100000>;
>
> We can set this now to 400kHz since the driver can handle quirks now
> internal.

After a discussion on the first patch I'm going to leave this as is.
Let me know if you do want me to change it.

>
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&pinctrl_i2c2>;
> > + pinctrl-1 = <&pinctrl_i2c2>;
>
> Do we need a "sleep" config here since this will be the same
> configuration as the "default" one.

Nope, dropped.

>
> > + status = "okay";
> > +
> > + bd71815: pmic@4b {
> > + compatible = "rohm,bd71815";
> > + reg = <0x4b>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_bd71815>;
> > + interrupt-parent = <&gpio6>; /* PMIC_INT_B GPIO6_IO16 */
> > + interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
> > + gpio-controller;
> > + clocks = <&clks IMX7D_CLKO2_ROOT_SRC>;
> > + clock-output-names = "bd71815-32k-out";
> > + #clock-cells = <0>;
> > + #gpio-cells = <1>;
> > +
> > + regulators {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + buck1_reg: regulator@0 {
> > + reg = <0>;
> > + regulator-compatible = "buck1";
> > + regulator-min-microvolt = <800000>;
> > + regulator-max-microvolt = <2000000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + regulator-ramp-delay = <1250>;
> > + };
> > +
> > + buck2_reg: regulator@1 {
> > + reg = <1>;
> > + regulator-compatible = "buck2";
> > + regulator-min-microvolt = <800000>;
> > + regulator-max-microvolt = <2000000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + regulator-ramp-delay = <1250>;
> > + };
> > +
> > + buck3_reg: regulator@2 {
> > + reg = <2>;
> > + regulator-compatible = "buck3";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <2700000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + buck4_reg: regulator@3 {
> > + reg = <3>;
> > + regulator-compatible = "buck4";
> > + regulator-min-microvolt = <1100000>;
> > + regulator-max-microvolt = <1850000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + buck5_reg: regulator@4 {
> > + reg = <4>;
> > + regulator-compatible = "buck5";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + ldo1_reg: regulator@5 {
> > + reg = <5>;
> > + regulator-compatible = "ldo1";
> > + regulator-min-microvolt = <800000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + ldo2_reg: regulator@6 {
> > + reg = <6>;
> > + regulator-compatible = "ldo2";
> > + regulator-min-microvolt = <800000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + ldo3_reg: regulator@7 {
> > + reg = <7>;
> > + regulator-compatible = "ldo3";
> > + regulator-min-microvolt = <800000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + ldo4_reg: regulator@8 {
> > + reg = <8>;
> > + regulator-compatible = "ldo4";
> > + regulator-min-microvolt = <800000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + ldo5_reg: regulator@9 {
> > + reg = <9>;
> > + regulator-compatible = "ldo5";
> > + regulator-min-microvolt = <800000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + dvref_reg: regulator@a {
> > + reg = <0xa>;
> > + regulator-compatible = "dvref";
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + lpsr_reg: regulator@b {
> > + reg = <0xb>;
> > + regulator-compatible = "lpsr";
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
> > +
> > + wled_reg: regulator@c {
> > + reg = <0xc>;
> > + regulator-compatible = "wled";
> > + regulator-min-microamp = <10>;
> > + regulator-max-microamp = <25000>;
> > + regulator-boot-on;
> > + regulator-always-on;
> > + };
>
> Note: You have marked all regulators as always on, this is rather
> suboptimal due to power consumption.

Good point. The power consumption is already pretty bad, as mainline
doesn't support the i.MX deep sleep. As I know this works I'd like to
keep it as is. I'll test to see if removing them doesn't break
anything and then send a follow up patch.

Alistair

>
> Regards,
> Marco
>

\
 
 \ /
  Last update: 2023-03-26 23:33    [W:0.071 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site