lkml.org 
[lkml]   [2023]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/4] arm64: dts: qcom: msm/apq8x16-*: Reorder the pinctrl properties.
From


On 9.01.2023 12:01, Nikita Travkin wrote:
> With other property lists that have -names properties, the -names is put
> last. However pinctrl-names in most msm8916 dts files was first instead.
>
> Reorder the pinctrl properties to be in line with other lists.
>
> Signed-off-by: Nikita Travkin <nikita@trvn.ru>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 18 +++++------
> .../boot/dts/qcom/msm8916-acer-a1-724.dts | 12 +++----
> .../boot/dts/qcom/msm8916-alcatel-idol347.dts | 22 ++++++-------
> .../arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 16 +++++-----
> .../arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 24 +++++++-------
> .../boot/dts/qcom/msm8916-longcheer-l8150.dts | 20 ++++++------
> .../boot/dts/qcom/msm8916-longcheer-l8910.dts | 12 +++----
> .../qcom/msm8916-samsung-a2015-common.dtsi | 32 +++++++++----------
> .../boot/dts/qcom/msm8916-samsung-a3u-eur.dts | 8 ++---
> .../boot/dts/qcom/msm8916-samsung-a5u-eur.dts | 4 +--
> .../qcom/msm8916-samsung-e2015-common.dtsi | 4 +--
> .../dts/qcom/msm8916-samsung-grandmax.dts | 2 +-
> .../boot/dts/qcom/msm8916-samsung-j5.dts | 6 ++--
> .../dts/qcom/msm8916-samsung-serranove.dts | 32 +++++++++----------
> .../dts/qcom/msm8916-wingtech-wt88047.dts | 14 ++++----
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 32 +++++++++----------
> 16 files changed, 129 insertions(+), 129 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
> index 3586f373d511..a64a8d998f58 100644
> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
> @@ -76,8 +76,8 @@ usb2513 {
> usb_id: usb-id {
> compatible = "linux,extcon-usb-gpio";
> id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> pinctrl-0 = <&usb_id_default>;
> + pinctrl-names = "default";
> };
>
> hdmi-out {
> @@ -95,8 +95,8 @@ gpio-keys {
> compatible = "gpio-keys";
> autorepeat;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&msm_key_volp_n_default>;
> + pinctrl-names = "default";
>
> button {
> label = "Volume Up";
> @@ -106,10 +106,10 @@ button {
> };
>
> leds {
> - pinctrl-names = "default";
> pinctrl-0 = <&msmgpio_leds>,
> <&pm8916_gpios_leds>,
> <&pm8916_mpps_leds>;
> + pinctrl-names = "default";
>
> compatible = "gpio-leds";
>
> @@ -201,9 +201,9 @@ adv_bridge: bridge@39 {
> v1p2-supply = <&pm8916_l6>;
> v3p3-supply = <&pm8916_l17>;
>
> - pinctrl-names = "default","sleep";
> pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
> pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
> + pinctrl-names = "default","sleep";
> #sound-dai-cells = <1>;
>
> status = "okay";
> @@ -283,8 +283,8 @@ camera_rear@3b {
>
> enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
> reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
> - pinctrl-names = "default";
> pinctrl-0 = <&camera_rear_default>;
> + pinctrl-names = "default";
>
> clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
> clock-names = "xclk";
> @@ -337,17 +337,17 @@ &pronto {
> };
>
> &sdhc_1 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
> pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> + pinctrl-names = "default", "sleep";
>
> status = "okay";
> };
>
> &sdhc_2 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
> pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> + pinctrl-names = "default", "sleep";
>
> cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
>
> @@ -399,9 +399,9 @@ codec {
> &usb {
> extcon = <&usb_id>, <&usb_id>;
>
> - pinctrl-names = "default", "device";
> pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
> pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
> + pinctrl-names = "default", "device";
>
> status = "okay";
> };
> @@ -833,8 +833,8 @@ &pm8916_mpps {
> "BT_LED_CTRL",
> "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
>
> - pinctrl-names = "default";
> pinctrl-0 = <&ls_exp_gpio_f>;
> + pinctrl-names = "default";
>
> ls_exp_gpio_f: pm8916-mpp4-state {
> pins = "mpp4";
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
> index ed3fa7b3575b..04bbdc76889c 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
> @@ -32,8 +32,8 @@ chosen {
> gpio-keys {
> compatible = "gpio-keys";
>
> - pinctrl-names = "default";
> pinctrl-0 = <&gpio_keys_default>;
> + pinctrl-names = "default";
>
> label = "GPIO Buttons";
>
> @@ -47,8 +47,8 @@ button-volume-up {
> usb_id: usb-id {
> compatible = "linux,extcon-usb-gpio";
> id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> pinctrl-0 = <&usb_id_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -64,8 +64,8 @@ accelerometer@10 {
> vdd-supply = <&pm8916_l17>;
> vddio-supply = <&pm8916_l6>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&accel_int_default>;
> + pinctrl-names = "default";
>
> mount-matrix = "0", "-1", "0",
> "-1", "0", "0",
> @@ -100,8 +100,8 @@ touchscreen@38 {
> touchscreen-size-x = <720>;
> touchscreen-size-y = <1280>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&touchscreen_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -123,17 +123,17 @@ &pronto {
> };
>
> &sdhc_1 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
> pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> + pinctrl-names = "default", "sleep";
>
> status = "okay";
> };
>
> &sdhc_2 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
> pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
> + pinctrl-names = "default", "sleep";
>
> cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>;
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
> index 20301eaa3b95..a5690354a2dd 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
> @@ -23,8 +23,8 @@ chosen {
> gpio-keys {
> compatible = "gpio-keys";
>
> - pinctrl-names = "default";
> pinctrl-0 = <&gpio_keys_default>;
> + pinctrl-names = "default";
>
> label = "GPIO Buttons";
>
> @@ -38,8 +38,8 @@ button-volume-up {
> gpio-leds {
> compatible = "gpio-leds";
>
> - pinctrl-names = "default";
> pinctrl-0 = <&gpio_leds_default>;
> + pinctrl-names = "default";
>
> led-0 {
> gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
> @@ -51,8 +51,8 @@ led-0 {
> usb_id: usb-id {
> compatible = "linux,extcon-usb-gpio";
> id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> pinctrl-0 = <&usb_id_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -69,8 +69,8 @@ touchscreen@26 {
> interrupt-parent = <&msmgpio>;
> interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
> reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>;
> - pinctrl-names = "default";
> pinctrl-0 = <&ts_int_reset_default>;
> + pinctrl-names = "default";
> vdd-supply = <&pm8916_l17>;
> vddio-supply = <&pm8916_l5>;
> touchscreen-size-x = <2048>;
> @@ -87,8 +87,8 @@ magnetometer@c {
> vdd-supply = <&pm8916_l17>;
> vid-supply = <&pm8916_l6>;
> reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>;
> - pinctrl-names = "default";
> pinctrl-0 = <&mag_reset_default>;
> + pinctrl-names = "default";
> mount-matrix = "0", "1", "0",
> "-1", "0", "0",
> "0", "0", "1";
> @@ -101,8 +101,8 @@ accelerometer@f {
> vddio-supply = <&pm8916_l6>;
> interrupt-parent = <&msmgpio>;
> interrupts = <31 IRQ_TYPE_EDGE_RISING>;
> - pinctrl-names = "default";
> pinctrl-0 = <&accel_int_default>;
> + pinctrl-names = "default";
> mount-matrix = "-1", "0", "0",
> "0", "1", "0",
> "0", "0", "-1";
> @@ -113,8 +113,8 @@ proximity@48 {
> reg = <0x48>;
> interrupt-parent = <&msmgpio>;
> interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
> - pinctrl-names = "default";
> pinctrl-0 = <&proximity_int_default>;
> + pinctrl-names = "default";
> };
>
> gyroscope@68 {
> @@ -125,8 +125,8 @@ gyroscope@68 {
> interrupt-parent = <&msmgpio>;
> interrupts = <97 IRQ_TYPE_EDGE_RISING>,
> <98 IRQ_TYPE_EDGE_RISING>;
> - pinctrl-names = "default";
> pinctrl-0 = <&gyro_int_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -137,8 +137,8 @@ led-controller@68 {
> compatible = "si-en,sn3190";
> reg = <0x68>;
> shutdown-gpios = <&msmgpio 89 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> pinctrl-0 = <&led_enable_default &led_shutdown_default>;
> + pinctrl-names = "default";
> #address-cells = <1>;
> #size-cells = <0>;
>
> @@ -165,17 +165,17 @@ &pronto {
> };
>
> &sdhc_1 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
> pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> + pinctrl-names = "default", "sleep";
>
> status = "okay";
> };
>
> &sdhc_2 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
> pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> + pinctrl-names = "default", "sleep";
>
> cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
> index a0f868854d53..9b6265d428ce 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
> @@ -23,8 +23,8 @@ chosen {
> gpio-keys {
> compatible = "gpio-keys";
>
> - pinctrl-names = "default";
> pinctrl-0 = <&gpio_keys_default>;
> + pinctrl-names = "default";
>
> label = "GPIO Buttons";
>
> @@ -54,15 +54,15 @@ reg_sd_vmmc: regulator-sdcard-vmmc {
>
> startup-delay-us = <200>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&sd_vmmc_en_default>;
> + pinctrl-names = "default";
> };
>
> usb_id: usb-id {
> compatible = "linux,extcon-usb-gpio";
> id-gpios = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> pinctrl-0 = <&usb_id_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -78,8 +78,8 @@ magnetometer@c {
>
> reset-gpios = <&msmgpio 112 GPIO_ACTIVE_LOW>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&mag_reset_default>;
> + pinctrl-names = "default";
> };
>
> imu@68 {
> @@ -92,8 +92,8 @@ imu@68 {
> vdd-supply = <&pm8916_l17>;
> vddio-supply = <&pm8916_l6>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&imu_default>;
> + pinctrl-names = "default";
>
> mount-matrix = "1", "0", "0",
> "0", "-1", "0",
> @@ -119,8 +119,8 @@ touchscreen@38 {
> touchscreen-size-x = <720>;
> touchscreen-size-y = <1280>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&touchscreen_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -133,9 +133,9 @@ &pronto {
> };
>
> &sdhc_1 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
> pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> + pinctrl-names = "default", "sleep";
>
> status = "okay";
> };
> @@ -143,9 +143,9 @@ &sdhc_1 {
> &sdhc_2 {
> vmmc-supply = <&reg_sd_vmmc>;
>
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
> pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> + pinctrl-names = "default", "sleep";
> cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
>
> status = "okay";
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
> index 2d266fd417f8..ac8b80de1a31 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
> @@ -36,8 +36,8 @@ chosen {
> gpio-keys {
> compatible = "gpio-keys";
>
> - pinctrl-names = "default";
> pinctrl-0 = <&gpio_keys_default>;
> + pinctrl-names = "default";
>
> label = "GPIO Buttons";
>
> @@ -51,8 +51,8 @@ button-volume-up {
> leds {
> compatible = "gpio-leds";
>
> - pinctrl-names = "default";
> pinctrl-0 = <&gpio_leds_default>;
> + pinctrl-names = "default";
>
> led-0 {
> gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>;
> @@ -79,8 +79,8 @@ led-2 {
> usb_id: usb-id {
> compatible = "linux,extcon-usb-gpio";
> id-gpio = <&msmgpio 117 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> pinctrl-0 = <&usb_id_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -96,8 +96,8 @@ magnetometer@c {
>
> reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&mag_reset_default>;
> + pinctrl-names = "default";
> };
>
> accelerometer@1e {
> @@ -110,8 +110,8 @@ accelerometer@1e {
> vdd-supply = <&pm8916_l17>;
> vddio-supply = <&pm8916_l6>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&accel_irq_default>;
> + pinctrl-names = "default";
>
> mount-matrix = "-1", "0", "0",
> "0", "1", "0",
> @@ -131,16 +131,16 @@ proximity@39 {
> led-max-microamp = <100000>;
> amstaos,proximity-diodes = <1>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&prox_irq_default>;
> + pinctrl-names = "default";
> };
>
> regulator@3e {
> compatible = "ti,tps65132";
> reg = <0x3e>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&reg_lcd_en_default>;
> + pinctrl-names = "default";
>
> reg_lcd_pos: outp {
> regulator-name = "outp";
> @@ -175,8 +175,8 @@ rmi4@70 {
> vdd-supply = <&pm8916_l17>;
> vio-supply = <&pm8916_l16>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&ts_irq_default>;
> + pinctrl-names = "default";
>
> syna,startup-delay-ms = <100>;
>
> @@ -205,8 +205,8 @@ nfc@28 {
> enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
> firmware-gpios = <&msmgpio 2 GPIO_ACTIVE_HIGH>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&nfc_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -232,17 +232,17 @@ &pronto {
> };
>
> &sdhc_1 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
> pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> + pinctrl-names = "default", "sleep";
>
> status = "okay";
> };
>
> &sdhc_2 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdhc2_cd_default>;
> pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdhc2_cd_default>;
> + pinctrl-names = "default", "sleep";
>
> /*
> * The Huawei device tree sets cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>.
> @@ -269,9 +269,9 @@ &sound {
> "AMIC2", "MIC BIAS External2",
> "AMIC3", "MIC BIAS External1";
>
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&cdc_pdm_lines_act>;
> pinctrl-1 = <&cdc_pdm_lines_sus>;
> + pinctrl-names = "default", "sleep";
>
> status = "okay";
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
> index f63f0fb797b4..8fbbfc98900d 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
> @@ -34,8 +34,8 @@ wcnss_mem: wcnss@8b600000 {
> gpio-keys {
> compatible = "gpio-keys";
>
> - pinctrl-names = "default";
> pinctrl-0 = <&gpio_keys_default>;
> + pinctrl-names = "default";
>
> label = "GPIO Buttons";
>
> @@ -56,8 +56,8 @@ reg_ctp: regulator-ctp {
> gpio = <&msmgpio 17 GPIO_ACTIVE_HIGH>;
> enable-active-high;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&ctp_pwr_en_default>;
> + pinctrl-names = "default";
> };
>
> flash-led-controller {
> @@ -65,8 +65,8 @@ flash-led-controller {
> flash-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>;
> enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&camera_flash_default>;
> + pinctrl-names = "default";
>
> flash_led: led {
> function = LED_FUNCTION_FLASH;
> @@ -126,8 +126,8 @@ accelerometer@10 {
> * interrupts = <116 IRQ_TYPE_EDGE_RISING>;
> */
>
> - pinctrl-names = "default";
> pinctrl-0 = <&accel_int_default>;
> + pinctrl-names = "default";
>
> vdd-supply = <&pm8916_l17>;
> vddio-supply = <&pm8916_l6>;
> @@ -144,8 +144,8 @@ magnetometer@12 {
> interrupt-parent = <&msmgpio>;
> interrupts = <113 IRQ_TYPE_EDGE_RISING>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&magn_int_default>;
> + pinctrl-names = "default";
>
> vdd-supply = <&pm8916_l17>;
> vddio-supply = <&pm8916_l6>;
> @@ -159,8 +159,8 @@ light-sensor@23 {
> interrupt-parent = <&msmgpio>;
> interrupts = <115 IRQ_TYPE_EDGE_FALLING>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&light_int_default>;
> + pinctrl-names = "default";
>
> vdd-supply = <&pm8916_l17>;
> vio-supply = <&pm8916_l6>;
> @@ -174,8 +174,8 @@ gyroscope@68 {
> interrupts = <23 IRQ_TYPE_EDGE_RISING>,
> <22 IRQ_TYPE_EDGE_RISING>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&gyro_int_default>;
> + pinctrl-names = "default";
>
> vdd-supply = <&pm8916_l17>;
> vddio-supply = <&pm8916_l6>;
> @@ -197,8 +197,8 @@ rmi4@20 {
> vdd-supply = <&reg_ctp>;
> vio-supply = <&pm8916_l6>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&tp_int_default>;
> + pinctrl-names = "default";
>
> syna,startup-delay-ms = <10>;
>
> @@ -236,17 +236,17 @@ &pronto {
> };
>
> &sdhc_1 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
> pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> + pinctrl-names = "default", "sleep";
>
> status = "okay";
> };
>
> &sdhc_2 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
> pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
> + pinctrl-names = "default", "sleep";
>
> non-removable;
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
> index 4d627d06f87b..b776a2b4a317 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
> @@ -23,8 +23,8 @@ chosen {
> gpio-keys {
> compatible = "gpio-keys";
>
> - pinctrl-names = "default";
> pinctrl-0 = <&gpio_keys_default>;
> + pinctrl-names = "default";
>
> label = "GPIO Buttons";
>
> @@ -44,16 +44,16 @@ led-0 {
> default-state = "off";
> function = LED_FUNCTION_KBD_BACKLIGHT;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&button_backlight_default>;
> + pinctrl-names = "default";
> };
> };
>
> usb_id: usb-id {
> compatible = "linux,extcon-usb-gpio";
> id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> pinctrl-0 = <&usb_id_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -69,8 +69,8 @@ magnetometer@d {
>
> reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&mag_reset_default>;
> + pinctrl-names = "default";
> };
>
> imu@68 {
> @@ -104,17 +104,17 @@ &pronto {
> };
>
> &sdhc_1 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
> pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> + pinctrl-names = "default", "sleep";
>
> status = "okay";
> };
>
> &sdhc_2 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
> pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> + pinctrl-names = "default", "sleep";
>
> cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
> index 13c586079e50..dd0e2e586ac1 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
> @@ -29,16 +29,16 @@ clk_pwm: pwm {
>
> clocks = <&gcc GCC_GP2_CLK>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&motor_pwm_default>;
> + pinctrl-names = "default";
> status = "disabled";
> };
>
> gpio-keys {
> compatible = "gpio-keys";
>
> - pinctrl-names = "default";
> pinctrl-0 = <&gpio_keys_default>;
> + pinctrl-names = "default";
>
> label = "GPIO Buttons";
>
> @@ -58,8 +58,8 @@ button-home {
> gpio-hall-sensor {
> compatible = "gpio-keys";
>
> - pinctrl-names = "default";
> pinctrl-0 = <&gpio_hall_sensor_default>;
> + pinctrl-names = "default";
>
> label = "GPIO Hall Effect Sensor";
>
> @@ -86,8 +86,8 @@ reg_motor_vdd: regulator-motor-vdd {
> gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
> enable-active-high;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&motor_en_default>;
> + pinctrl-names = "default";
> };
>
> reg_vdd_tsp_a: regulator-vdd-tsp-a {
> @@ -99,8 +99,8 @@ reg_vdd_tsp_a: regulator-vdd-tsp-a {
> gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
> enable-active-high;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&tsp_en_default>;
> + pinctrl-names = "default";
> };
>
> i2c-muic {
> @@ -108,8 +108,8 @@ i2c-muic {
> sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&muic_i2c_default>;
> + pinctrl-names = "default";
>
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -121,8 +121,8 @@ muic: extcon@25 {
> interrupt-parent = <&msmgpio>;
> interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&muic_int_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -131,8 +131,8 @@ i2c-tkey {
> sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&tkey_i2c_default>;
> + pinctrl-names = "default";
>
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -150,8 +150,8 @@ touchkey: touchkey@20 {
>
> linux,keycodes = <KEY_APPSELECT KEY_BACK>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&tkey_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -160,8 +160,8 @@ i2c-nfc {
> sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&nfc_i2c_default>;
> + pinctrl-names = "default";
>
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -178,8 +178,8 @@ nfc@27 {
>
> clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&nfc_default &nfc_clk_req>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -206,8 +206,8 @@ accelerometer: accelerometer@10 {
> vdd-supply = <&pm8916_l17>;
> vddio-supply = <&pm8916_l5>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&accel_int_default>;
> + pinctrl-names = "default";
> };
>
> magnetometer@12 {
> @@ -228,8 +228,8 @@ battery@35 {
> interrupt-parent = <&msmgpio>;
> interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&fg_alert_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -238,9 +238,9 @@ &blsp1_uart2 {
> };
>
> &dsi0 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&mdss_default>;
> pinctrl-1 = <&mdss_sleep>;
> + pinctrl-names = "default", "sleep";
> };
>
> &mdss {
> @@ -257,17 +257,17 @@ &pronto {
> };
>
> &sdhc_1 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
> pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> + pinctrl-names = "default", "sleep";
>
> status = "okay";
> };
>
> &sdhc_2 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
> pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> + pinctrl-names = "default", "sleep";
>
> cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
> index c691cca2eb45..2eb06cf626dc 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
> @@ -18,8 +18,8 @@ reg_panel_vdd3: regulator-panel-vdd3 {
> gpio = <&msmgpio 9 GPIO_ACTIVE_HIGH>;
> enable-active-high;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&panel_vdd3_default>;
> + pinctrl-names = "default";
> };
>
> reg_touch_key: regulator-touch-key {
> @@ -31,8 +31,8 @@ reg_touch_key: regulator-touch-key {
> gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
> enable-active-high;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&tkey_en_default>;
> + pinctrl-names = "default";
> };
>
> reg_key_led: regulator-key-led {
> @@ -44,8 +44,8 @@ reg_key_led: regulator-key-led {
> gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
> enable-active-high;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&tkey_led_en_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -76,8 +76,8 @@ touchscreen@20 {
> vcca-supply = <&reg_vdd_tsp_a>;
> vdd-supply = <&pm8916_l6>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&ts_int_default>;
> + pinctrl-names = "default";
> };
> };
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
> index 3dd819458785..179c872091d8 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
> @@ -18,8 +18,8 @@ reg_touch_key: regulator-touch-key {
> gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>;
> enable-active-high;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&tkey_en_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -45,8 +45,8 @@ touchscreen@48 {
> avdd-supply = <&reg_vdd_tsp_a>;
> vdd-supply = <&pm8916_l6>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&ts_int_default>;
> + pinctrl-names = "default";
> };
> };
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
> index c95f0b4bc61f..6c04ca97e98a 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
> @@ -21,8 +21,8 @@ muic: extcon@14 {
> interrupt-parent = <&msmgpio>;
> interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&muic_int_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -35,8 +35,8 @@ reg_touch_key: regulator-touch-key {
> gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>;
> enable-active-high;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&tkey_en_default>;
> + pinctrl-names = "default";
> };
> };
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
> index 4cbd68b89448..f5ca2d30881f 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
> @@ -35,8 +35,8 @@ led-keyled {
>
> gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&gpio_leds_default>;
> + pinctrl-names = "default";
> };
> };
> };
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
> index 8eb68bb6607c..882ed9c65d88 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
> @@ -29,8 +29,8 @@ tz-apps@85500000 {
> gpio-keys {
> compatible = "gpio-keys";
>
> - pinctrl-names = "default";
> pinctrl-0 = <&gpio_keys_default>;
> + pinctrl-names = "default";
>
> label = "GPIO Buttons";
>
> @@ -67,17 +67,17 @@ &pronto {
> };
>
> &sdhc_1 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
> pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> + pinctrl-names = "default", "sleep";
>
> status = "okay";
> };
>
> &sdhc_2 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
> pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> + pinctrl-names = "default", "sleep";
>
> cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
> index 34bee5211413..249519635ba6 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
> @@ -46,8 +46,8 @@ tz-apps@85500000 {
> gpio-keys {
> compatible = "gpio-keys";
>
> - pinctrl-names = "default";
> pinctrl-0 = <&gpio_keys_default>;
> + pinctrl-names = "default";
>
> label = "GPIO Buttons";
>
> @@ -67,8 +67,8 @@ button-home {
> gpio-hall-sensor {
> compatible = "gpio-keys";
>
> - pinctrl-names = "default";
> pinctrl-0 = <&gpio_hall_sensor_default>;
> + pinctrl-names = "default";
>
> label = "GPIO Hall Effect Sensor";
>
> @@ -90,8 +90,8 @@ reg_vdd_tsp: regulator-vdd-tsp {
> gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
> enable-active-high;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&tsp_en_default>;
> + pinctrl-names = "default";
> };
>
> reg_touch_key: regulator-touch-key {
> @@ -103,8 +103,8 @@ reg_touch_key: regulator-touch-key {
> gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
> enable-active-high;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&tkey_en_default>;
> + pinctrl-names = "default";
> };
>
> reg_key_led: regulator-key-led {
> @@ -116,8 +116,8 @@ reg_key_led: regulator-key-led {
> gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
> enable-active-high;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&tkey_led_en_default>;
> + pinctrl-names = "default";
> };
>
> i2c-muic {
> @@ -125,8 +125,8 @@ i2c-muic {
> sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&muic_i2c_default>;
> + pinctrl-names = "default";
>
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -138,8 +138,8 @@ muic: extcon@14 {
> interrupt-parent = <&msmgpio>;
> interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&muic_irq_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -148,8 +148,8 @@ i2c-tkey {
> sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&tkey_i2c_default>;
> + pinctrl-names = "default";
>
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -167,8 +167,8 @@ touchkey@20 {
>
> linux,keycodes = <KEY_APPSELECT KEY_BACK>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&tkey_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -177,8 +177,8 @@ i2c-nfc {
> sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
> scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&nfc_i2c_default>;
> + pinctrl-names = "default";
>
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -193,8 +193,8 @@ nfc@2b {
> enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
> firmware-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&nfc_default>;
> + pinctrl-names = "default";
> };
> };
> };
> @@ -209,8 +209,8 @@ imu@6b {
> interrupt-parent = <&msmgpio>;
> interrupts = <115 IRQ_TYPE_EDGE_RISING>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&imu_irq_default>;
> + pinctrl-names = "default";
> };
>
> magnetometer@2e {
> @@ -233,8 +233,8 @@ battery@35 {
> interrupt-parent = <&msmgpio>;
> interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&fg_alert_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -254,8 +254,8 @@ touchscreen@20 {
> vdd-supply = <&reg_vdd_tsp>;
> vddo-supply = <&pm8916_l6>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&tsp_irq_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -281,17 +281,17 @@ iris {
> };
>
> &sdhc_1 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
> pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> + pinctrl-names = "default", "sleep";
>
> status = "okay";
> };
>
> &sdhc_2 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
> pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
> + pinctrl-names = "default", "sleep";
>
> non-removable;
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
> index 24a5c3486beb..e542b48a4fad 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
> @@ -28,8 +28,8 @@ flash-led-controller {
> enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>;
> flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&camera_flash_default>;
> + pinctrl-names = "default";
>
> flash_led: led {
> function = LED_FUNCTION_FLASH;
> @@ -40,8 +40,8 @@ flash_led: led {
> gpio-keys {
> compatible = "gpio-keys";
>
> - pinctrl-names = "default";
> pinctrl-0 = <&gpio_keys_default>;
> + pinctrl-names = "default";
>
> label = "GPIO Buttons";
>
> @@ -55,8 +55,8 @@ button-volume-up {
> usb_id: usb-id {
> compatible = "linux,extcon-usb-gpio";
> id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
> - pinctrl-names = "default";
> pinctrl-0 = <&usb_id_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -73,8 +73,8 @@ imu@68 {
> vdd-supply = <&pm8916_l17>;
> vddio-supply = <&pm8916_l6>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&imu_default>;
> + pinctrl-names = "default";
>
> mount-matrix = "1", "0", "0",
> "0", "-1", "0",
> @@ -101,8 +101,8 @@ touchscreen@38 {
> touchscreen-size-x = <720>;
> touchscreen-size-y = <1280>;
>
> - pinctrl-names = "default";
> pinctrl-0 = <&touchscreen_default>;
> + pinctrl-names = "default";
> };
> };
>
> @@ -158,17 +158,17 @@ &pronto {
> };
>
> &sdhc_1 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
> pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> + pinctrl-names = "default", "sleep";
>
> status = "okay";
> };
>
> &sdhc_2 {
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
> pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
> + pinctrl-names = "default", "sleep";
>
> non-removable;
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index ffb4ce8935b3..a541631e4607 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -1182,8 +1182,8 @@ cci: cci@1b0c000 {
> assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
> <&gcc GCC_CAMSS_CCI_CLK>;
> assigned-clock-rates = <80000000>, <19200000>;
> - pinctrl-names = "default";
> pinctrl-0 = <&cci0_default>;
> + pinctrl-names = "default";
> status = "disabled";
>
> cci_i2c0: i2c-bus@0 {
> @@ -1533,9 +1533,9 @@ blsp1_uart1: serial@78af000 {
> clock-names = "core", "iface";
> dmas = <&blsp_dma 0>, <&blsp_dma 1>;
> dma-names = "tx", "rx";
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&blsp1_uart1_default>;
> pinctrl-1 = <&blsp1_uart1_sleep>;
> + pinctrl-names = "default", "sleep";
> status = "disabled";
> };
>
> @@ -1547,9 +1547,9 @@ blsp1_uart2: serial@78b0000 {
> clock-names = "core", "iface";
> dmas = <&blsp_dma 2>, <&blsp_dma 3>;
> dma-names = "tx", "rx";
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&blsp1_uart2_default>;
> pinctrl-1 = <&blsp1_uart2_sleep>;
> + pinctrl-names = "default", "sleep";
> status = "disabled";
> };
>
> @@ -1560,9 +1560,9 @@ blsp_i2c1: i2c@78b5000 {
> clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
> <&gcc GCC_BLSP1_AHB_CLK>;
> clock-names = "core", "iface";
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&i2c1_default>;
> pinctrl-1 = <&i2c1_sleep>;
> + pinctrl-names = "default", "sleep";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1577,9 +1577,9 @@ blsp_spi1: spi@78b5000 {
> clock-names = "core", "iface";
> dmas = <&blsp_dma 4>, <&blsp_dma 5>;
> dma-names = "tx", "rx";
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&spi1_default>;
> pinctrl-1 = <&spi1_sleep>;
> + pinctrl-names = "default", "sleep";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1592,9 +1592,9 @@ blsp_i2c2: i2c@78b6000 {
> clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
> <&gcc GCC_BLSP1_AHB_CLK>;
> clock-names = "core", "iface";
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&i2c2_default>;
> pinctrl-1 = <&i2c2_sleep>;
> + pinctrl-names = "default", "sleep";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1609,9 +1609,9 @@ blsp_spi2: spi@78b6000 {
> clock-names = "core", "iface";
> dmas = <&blsp_dma 6>, <&blsp_dma 7>;
> dma-names = "tx", "rx";
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&spi2_default>;
> pinctrl-1 = <&spi2_sleep>;
> + pinctrl-names = "default", "sleep";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1624,9 +1624,9 @@ blsp_i2c3: i2c@78b7000 {
> clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
> <&gcc GCC_BLSP1_AHB_CLK>;
> clock-names = "core", "iface";
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&i2c3_default>;
> pinctrl-1 = <&i2c3_sleep>;
> + pinctrl-names = "default", "sleep";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1641,9 +1641,9 @@ blsp_spi3: spi@78b7000 {
> clock-names = "core", "iface";
> dmas = <&blsp_dma 8>, <&blsp_dma 9>;
> dma-names = "tx", "rx";
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&spi3_default>;
> pinctrl-1 = <&spi3_sleep>;
> + pinctrl-names = "default", "sleep";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1656,9 +1656,9 @@ blsp_i2c4: i2c@78b8000 {
> clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
> <&gcc GCC_BLSP1_AHB_CLK>;
> clock-names = "core", "iface";
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&i2c4_default>;
> pinctrl-1 = <&i2c4_sleep>;
> + pinctrl-names = "default", "sleep";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1673,9 +1673,9 @@ blsp_spi4: spi@78b8000 {
> clock-names = "core", "iface";
> dmas = <&blsp_dma 10>, <&blsp_dma 11>;
> dma-names = "tx", "rx";
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&spi4_default>;
> pinctrl-1 = <&spi4_sleep>;
> + pinctrl-names = "default", "sleep";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1688,9 +1688,9 @@ blsp_i2c5: i2c@78b9000 {
> clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
> <&gcc GCC_BLSP1_AHB_CLK>;
> clock-names = "core", "iface";
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&i2c5_default>;
> pinctrl-1 = <&i2c5_sleep>;
> + pinctrl-names = "default", "sleep";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1705,9 +1705,9 @@ blsp_spi5: spi@78b9000 {
> clock-names = "core", "iface";
> dmas = <&blsp_dma 12>, <&blsp_dma 13>;
> dma-names = "tx", "rx";
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&spi5_default>;
> pinctrl-1 = <&spi5_sleep>;
> + pinctrl-names = "default", "sleep";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1720,9 +1720,9 @@ blsp_i2c6: i2c@78ba000 {
> clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
> <&gcc GCC_BLSP1_AHB_CLK>;
> clock-names = "core", "iface";
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&i2c6_default>;
> pinctrl-1 = <&i2c6_sleep>;
> + pinctrl-names = "default", "sleep";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1737,9 +1737,9 @@ blsp_spi6: spi@78ba000 {
> clock-names = "core", "iface";
> dmas = <&blsp_dma 14>, <&blsp_dma 15>;
> dma-names = "tx", "rx";
> - pinctrl-names = "default", "sleep";
> pinctrl-0 = <&spi6_default>;
> pinctrl-1 = <&spi6_sleep>;
> + pinctrl-names = "default", "sleep";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -1807,8 +1807,8 @@ pronto: remoteproc@a21b000 {
> qcom,smem-states = <&wcnss_smp2p_out 0>;
> qcom,smem-state-names = "stop";
>
> - pinctrl-names = "default";
> pinctrl-0 = <&wcnss_pin_a>;
> + pinctrl-names = "default";
>
> status = "disabled";
>

\
 
 \ /
  Last update: 2023-03-26 23:33    [W:0.112 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site