lkml.org 
[lkml]   [2023]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v9 6/9] drm/bridge: anx7625: Register Type C mode switches
On Mon, Jan 9, 2023 at 4:41 PM Pin-yen Lin <treapking@chromium.org> wrote:
>
> Register USB Type-C mode switches when the "mode-switch" property and
> relevant port are available in Device Tree. Configure the crosspoint
^ ports

> switch based on the entered alternate mode for a specific Type-C
> connector.

You should also mention that the "one mode switch" scenario is not
covered in this implementation, due to lack of actual hardware.

> Signed-off-by: Pin-yen Lin <treapking@chromium.org>
>
> ---
>
> (no changes since v7)
>
> Changes in v7:
> - Fixed style issues in anx7625 driver
> - Removed DT property validation in anx7625 driver.
> - Extracted common codes to another commit.
>
> Changes in v6:
> - Squashed to a single patch
>
> drivers/gpu/drm/bridge/analogix/Kconfig | 1 +
> drivers/gpu/drm/bridge/analogix/anx7625.c | 88 +++++++++++++++++++++++
> drivers/gpu/drm/bridge/analogix/anx7625.h | 13 ++++
> 3 files changed, 102 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/Kconfig b/drivers/gpu/drm/bridge/analogix/Kconfig
> index 173dada218ec..992b43ed1dd7 100644
> --- a/drivers/gpu/drm/bridge/analogix/Kconfig
> +++ b/drivers/gpu/drm/bridge/analogix/Kconfig
> @@ -34,6 +34,7 @@ config DRM_ANALOGIX_ANX7625
> tristate "Analogix Anx7625 MIPI to DP interface support"
> depends on DRM
> depends on OF
> + depends on TYPEC || TYPEC=n
> select DRM_DISPLAY_DP_HELPER
> select DRM_DISPLAY_HDCP_HELPER
> select DRM_DISPLAY_HELPER
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index 1cf242130b91..2bb504a8d789 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -15,6 +15,8 @@
> #include <linux/regulator/consumer.h>
> #include <linux/slab.h>
> #include <linux/types.h>
> +#include <linux/usb/typec_dp.h>
> +#include <linux/usb/typec_mux.h>
> #include <linux/workqueue.h>
>
> #include <linux/of_gpio.h>
> @@ -2572,6 +2574,86 @@ static void anx7625_runtime_disable(void *data)
> pm_runtime_disable(data);
> }
>
> +static void anx7625_set_crosspoint_switch(struct anx7625_data *ctx,
> + enum typec_orientation orientation)
> +{
> + if (orientation == TYPEC_ORIENTATION_NORMAL) {
> + anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
> + SW_SEL1_SSRX_RX1 | SW_SEL1_DPTX0_RX2);
> + anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
> + SW_SEL2_SSTX_TX1 | SW_SEL2_DPTX1_TX2);
> + } else if (orientation == TYPEC_ORIENTATION_REVERSE) {
> + anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
> + SW_SEL1_SSRX_RX2 | SW_SEL1_DPTX0_RX1);
> + anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
> + SW_SEL2_SSTX_TX2 | SW_SEL2_DPTX1_TX1);
> + }
> +}
> +
> +static void anx7625_typec_two_ports_update(struct anx7625_data *ctx)
> +{
> + struct drm_dp_typec_switch_desc switch_desc = ctx->switch_desc;
> + /* Check if both ports available and do nothing to retain the current one */
> + if (switch_desc.typec_ports[0].dp_connected && switch_desc.typec_ports[1].dp_connected)
> + return;
> +
> + if (switch_desc.typec_ports[0].dp_connected)
> + anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_NORMAL);
> + else if (switch_desc.typec_ports[1].dp_connected)
> + anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_REVERSE);
> +}
> +
> +static int anx7625_typec_mux_set(struct typec_mux_dev *mux,
> + struct typec_mux_state *state)
> +{
> + struct drm_dp_typec_port_data *port_data = typec_mux_get_drvdata(mux);
> + struct anx7625_data *ctx = (struct anx7625_data *) port_data->data;
> + struct device *dev = &ctx->client->dev;
> + struct drm_dp_typec_switch_desc switch_desc = ctx->switch_desc;
> + bool new_dp_connected, old_dp_connected;
> +

And place a TODO note here.

Otherwise this looks OK.

Also,

Tested-by: Chen-Yu Tsai <wenst@chromium.org>
on MT8192 based Hayato (ASUS Chromebook Flip CM3200).

And this also uncovered a deadlock in the unplug & disable path.
I'll send a fix for that later once I figure out all the details.

\
 
 \ /
  Last update: 2023-03-26 23:33    [W:0.770 / U:1.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site