lkml.org 
[lkml]   [2023]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 6/7] drm/msm/dsi: add support for DSI-PHY on SM8550
On Mon, 9 Jan 2023 at 11:38, Neil Armstrong <neil.armstrong@linaro.org> wrote:
>
> On 09/01/2023 10:26, Neil Armstrong wrote:
> > SM8550 use a 4nm DSI PHYs, which share register definitions
> > with 7nm DSI PHYs. Rather than duplicating the driver, handle
> > 4nm variant inside the common 5+7nm driver.
> >
> > Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> > ---
> > drivers/gpu/drm/msm/Kconfig | 4 +-
> > drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 +
> > drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 +
> > drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 88 ++++++++++++++++++++++++++-----
> > 4 files changed, 79 insertions(+), 16 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
> > index e7b100d97f88..949b18a29a55 100644
> > --- a/drivers/gpu/drm/msm/Kconfig
> > +++ b/drivers/gpu/drm/msm/Kconfig
> > @@ -140,11 +140,11 @@ config DRM_MSM_DSI_10NM_PHY
> > Choose this option if DSI PHY on SDM845 is used on the platform.
> >
> > config DRM_MSM_DSI_7NM_PHY
> > - bool "Enable DSI 7nm/5nm PHY driver in MSM DRM"
> > + bool "Enable DSI 7nm/5nm/4nm PHY driver in MSM DRM"
> > depends on DRM_MSM_DSI
> > default y
> > help
> > - Choose this option if DSI PHY on SM8150/SM8250/SM8350/SM8450/SC7280
> > + Choose this option if DSI PHY on SM8150/SM8250/SM8350/SM8450/SM8550/SC7280
> > is used on the platform.
> >
> > config DRM_MSM_HDMI
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> > index 04126af74bb5..798cd3c86031 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
> > @@ -573,6 +573,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
> > .data = &dsi_phy_5nm_8350_cfgs },
> > { .compatible = "qcom,sm8450-dsi-phy-5nm",
> > .data = &dsi_phy_5nm_8450_cfgs },
> > + { .compatible = "qcom,dsi-phy-4nm-8550",
>
> Forgot to change this... I can resend a v3 with this fixed.

Yes, please.

>
> Neil
>
> > + .data = &dsi_phy_4nm_8550_cfgs },
> > #endif
> > {}
> > };
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> > index f7a907ed2b4b..58f9e09f5224 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
> > @@ -59,6 +59,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs;
> > extern const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs;
> > extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8350_cfgs;
> > extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs;
> > +extern const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs;
> >
> > struct msm_dsi_dphy_timing {
> > u32 clk_zero;
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> > index 7b2c16b3a36c..af5c952c6ad0 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> > @@ -47,6 +47,8 @@
> > #define DSI_PHY_7NM_QUIRK_V4_2 BIT(2)
> > /* Hardware is V4.3 */
> > #define DSI_PHY_7NM_QUIRK_V4_3 BIT(3)
> > +/* Hardware is V5.2 */
> > +#define DSI_PHY_7NM_QUIRK_V5_2 BIT(4)
> >
> > struct dsi_pll_config {
> > bool enable_ssc;
> > @@ -124,14 +126,25 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config
> >
> > if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_PRE_V4_1)
> > config->pll_clock_inverters = 0x28;
> > - else if (pll_freq <= 1000000000ULL)
> > - config->pll_clock_inverters = 0xa0;
> > - else if (pll_freq <= 2500000000ULL)
> > - config->pll_clock_inverters = 0x20;
> > - else if (pll_freq <= 3020000000ULL)
> > - config->pll_clock_inverters = 0x00;
> > - else
> > - config->pll_clock_inverters = 0x40;
> > + else if ((pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
> > + if (pll_freq <= 1300000000ULL)
> > + config->pll_clock_inverters = 0xa0;
> > + else if (pll_freq <= 2500000000ULL)
> > + config->pll_clock_inverters = 0x20;
> > + else if (pll_freq <= 4000000000ULL)
> > + config->pll_clock_inverters = 0x00;
> > + else
> > + config->pll_clock_inverters = 0x40;
> > + } else {
> > + if (pll_freq <= 1000000000ULL)
> > + config->pll_clock_inverters = 0xa0;
> > + else if (pll_freq <= 2500000000ULL)
> > + config->pll_clock_inverters = 0x20;
> > + else if (pll_freq <= 3020000000ULL)
> > + config->pll_clock_inverters = 0x00;
> > + else
> > + config->pll_clock_inverters = 0x40;
> > + }
> >
> > config->decimal_div_start = dec;
> > config->frac_div_start = frac;
> > @@ -222,6 +235,13 @@ static void dsi_pll_config_hzindep_reg(struct dsi_pll_7nm *pll)
> > vco_config_1 = 0x01;
> > }
> >
> > + if ((pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
> > + if (pll->vco_current_rate < 1557000000ULL)
> > + vco_config_1 = 0x08;
> > + else
> > + vco_config_1 = 0x01;
> > + }
> > +
> > dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_ANALOG_CONTROLS_FIVE_1,
> > analog_controls_five_1);
> > dsi_phy_write(base + REG_DSI_7nm_PHY_PLL_VCO_CONFIG_1, vco_config_1);
> > @@ -860,7 +880,8 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
> > pr_warn("PLL turned on before configuring PHY\n");
> >
> > /* Request for REFGEN READY */
> > - if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
> > + if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) ||
> > + (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
> > dsi_phy_write(phy->base + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE10, 0x1);
> > udelay(500);
> > }
> > @@ -894,7 +915,19 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
> > lane_ctrl0 = 0x1f;
> > }
> >
> > - if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
> > + if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
> > + if (phy->cphy_mode) {
> > + vreg_ctrl_0 = 0x45;
> > + vreg_ctrl_1 = 0x45;
> > + glbl_rescode_top_ctrl = 0x00;
> > + glbl_rescode_bot_ctrl = 0x00;
> > + } else {
> > + vreg_ctrl_0 = 0x44;
> > + vreg_ctrl_1 = 0x19;
> > + glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3c : 0x03;
> > + glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 : 0x3c;
> > + }
> > + } else if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3)) {
> > if (phy->cphy_mode) {
> > glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d : 0x01;
> > glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x38 : 0x3b;
> > @@ -943,9 +976,8 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
> > dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_RBUF_CTRL, 0x00);
> >
> > /* program CMN_CTRL_4 for minor_ver 2 chipsets*/
> > - data = dsi_phy_read(base + REG_DSI_7nm_PHY_CMN_REVISION_ID0);
> > - data = data & (0xf0);
> > - if (data == 0x20)
> > + if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2) ||
> > + (dsi_phy_read(base + REG_DSI_7nm_PHY_CMN_REVISION_ID0) & (0xf0)) == 0x20)
> > dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_CTRL_4, 0x04);
> >
> > /* Configure PHY lane swap (TODO: we need to calculate this) */
> > @@ -1058,7 +1090,8 @@ static void dsi_7nm_phy_disable(struct msm_dsi_phy *phy)
> > dsi_phy_hw_v4_0_config_lpcdrx(phy, false);
> >
> > /* Turn off REFGEN Vote */
> > - if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) {
> > + if ((phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_3) ||
> > + (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V5_2)) {
> > dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_GLBL_DIGTOP_SPARE10, 0x0);
> > wmb();
> > /* Delay to ensure HW removes vote before PHY shut down */
> > @@ -1092,6 +1125,10 @@ static const struct regulator_bulk_data dsi_phy_7nm_97800uA_regulators[] = {
> > { .supply = "vdds", .init_load_uA = 97800 },
> > };
> >
> > +static const struct regulator_bulk_data dsi_phy_7nm_98400uA_regulators[] = {
> > + { .supply = "vdds", .init_load_uA = 98400 },
> > +};
> > +
> > const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs = {
> > .has_phy_lane = true,
> > .regulator_data = dsi_phy_7nm_36mA_regulators,
> > @@ -1201,3 +1238,26 @@ const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs = {
> > .num_dsi_phy = 2,
> > .quirks = DSI_PHY_7NM_QUIRK_V4_3,
> > };
> > +
> > +const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs = {
> > + .has_phy_lane = true,
> > + .regulator_data = dsi_phy_7nm_98400uA_regulators,
> > + .num_regulators = ARRAY_SIZE(dsi_phy_7nm_98400uA_regulators),
> > + .ops = {
> > + .enable = dsi_7nm_phy_enable,
> > + .disable = dsi_7nm_phy_disable,
> > + .pll_init = dsi_pll_7nm_init,
> > + .save_pll_state = dsi_7nm_pll_save_state,
> > + .restore_pll_state = dsi_7nm_pll_restore_state,
> > + .set_continuous_clock = dsi_7nm_set_continuous_clock,
> > + },
> > + .min_pll_rate = 600000000UL,
> > +#ifdef CONFIG_64BIT
> > + .max_pll_rate = 5000000000UL,
> > +#else
> > + .max_pll_rate = ULONG_MAX,
> > +#endif
> > + .io_start = { 0xae95000, 0xae97000 },
> > + .num_dsi_phy = 2,
> > + .quirks = DSI_PHY_7NM_QUIRK_V5_2,
> > +};
> >
>


--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2023-03-26 23:32    [W:0.047 / U:1.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site