lkml.org 
[lkml]   [2023]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/3] soc: qcom: rmtfs: Optionally map RMTFS to more VMs
Date
From: Loic Poulain <loic.poulain@linaro.org>

Some SoCs require that RMTFS is also mapped to the NAV VM. Trying to
power on the modem without that results in the whole platform
crashing and forces a hard reboot within about 2 seconds. Add support
for mapping the region to additional VMs, such as NAV to open a path
towards enabling modem on such platforms.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
[Konrad: reword, make conditional and flexible, add a define for NAV VMID]
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v2 -> v3:
Rewrite, make it accept more than just NAV through qcom,vmid

drivers/soc/qcom/rmtfs_mem.c | 29 ++++++++++++++++++++++-------
include/linux/qcom_scm.h | 1 +
2 files changed, 23 insertions(+), 7 deletions(-)

diff --git a/drivers/soc/qcom/rmtfs_mem.c b/drivers/soc/qcom/rmtfs_mem.c
index 0feaae357821..9d59ad509a5c 100644
--- a/drivers/soc/qcom/rmtfs_mem.c
+++ b/drivers/soc/qcom/rmtfs_mem.c
@@ -17,6 +17,7 @@
#include <linux/qcom_scm.h>

#define QCOM_RMTFS_MEM_DEV_MAX (MINORMASK + 1)
+#define NUM_MAX_VMIDS 2

static dev_t qcom_rmtfs_mem_major;

@@ -171,12 +172,12 @@ static void qcom_rmtfs_mem_release_device(struct device *dev)
static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
- struct qcom_scm_vmperm perms[2];
+ struct qcom_scm_vmperm perms[NUM_MAX_VMIDS + 1];
struct reserved_mem *rmem;
struct qcom_rmtfs_mem *rmtfs_mem;
u32 client_id;
- u32 vmid;
- int ret;
+ u32 num_vmids, vmid[NUM_MAX_VMIDS];
+ int ret, i;

rmem = of_reserved_mem_lookup(node);
if (!rmem) {
@@ -226,7 +227,18 @@ static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
goto put_device;
}

- ret = of_property_read_u32(node, "qcom,vmid", &vmid);
+ num_vmids = of_property_count_u32_elems(node, "qcom,vmid");
+ if (num_vmids < 0) {
+ dev_err(&pdev->dev, "failed to count qcom,vmid elements: %d\n", ret);
+ goto remove_cdev;
+ } else if (num_vmids > NUM_MAX_VMIDS) {
+ dev_warn(&pdev->dev,
+ "too many VMIDs (%d) specified! Only mapping first %d entries\n",
+ num_vmids, NUM_MAX_VMIDS);
+ num_vmids = NUM_MAX_VMIDS;
+ }
+
+ ret = of_property_read_u32_array(node, "qcom,vmid", vmid, num_vmids);
if (ret < 0 && ret != -EINVAL) {
dev_err(&pdev->dev, "failed to parse qcom,vmid\n");
goto remove_cdev;
@@ -238,12 +250,15 @@ static int qcom_rmtfs_mem_probe(struct platform_device *pdev)

perms[0].vmid = QCOM_SCM_VMID_HLOS;
perms[0].perm = QCOM_SCM_PERM_RW;
- perms[1].vmid = vmid;
- perms[1].perm = QCOM_SCM_PERM_RW;
+
+ for (i = 0; i < num_vmids; i++) {
+ perms[i + 1].vmid = vmid[i];
+ perms[i + 1].perm = QCOM_SCM_PERM_RW;
+ }

rmtfs_mem->perms = BIT(QCOM_SCM_VMID_HLOS);
ret = qcom_scm_assign_mem(rmtfs_mem->addr, rmtfs_mem->size,
- &rmtfs_mem->perms, perms, 2);
+ &rmtfs_mem->perms, perms, num_vmids + 1);
if (ret < 0) {
dev_err(&pdev->dev, "assign memory failed\n");
goto remove_cdev;
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index f8335644a01a..150b72edb879 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -55,6 +55,7 @@ enum qcom_scm_ice_cipher {
#define QCOM_SCM_VMID_MSS_MSA 0xF
#define QCOM_SCM_VMID_WLAN 0x18
#define QCOM_SCM_VMID_WLAN_CE 0x19
+#define QCOM_SCM_VMID_NAV 0x2B
#define QCOM_SCM_PERM_READ 0x4
#define QCOM_SCM_PERM_WRITE 0x2
#define QCOM_SCM_PERM_EXEC 0x1
--
2.39.0
\
 
 \ /
  Last update: 2023-03-26 23:32    [W:0.080 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site