lkml.org 
[lkml]   [2023]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/5] hwmon: ltc2945: Allow setting shunt resistor
Date
From: John Pruitt <jpruitt@criticallink.com>

Add the ability to specify the value of the shunt resistor in the
device tree instead of assuming it is 1 milliOhm. The value in the
device tree has the name shunt-resistor-micro-ohms and the
default value is 1000 micro-ohms in order to preserve the
current behavior.

Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: John Pruitt <jpruitt@criticallink.com>
---
drivers/hwmon/ltc2945.c | 85 +++++++++++++++++++++++++----------------
1 file changed, 53 insertions(+), 32 deletions(-)

diff --git a/drivers/hwmon/ltc2945.c b/drivers/hwmon/ltc2945.c
index c66acf8d2124..0d743d75459c 100644
--- a/drivers/hwmon/ltc2945.c
+++ b/drivers/hwmon/ltc2945.c
@@ -64,6 +64,16 @@ static const struct of_device_id __maybe_unused ltc2945_of_match[] = {
};
MODULE_DEVICE_TABLE(of, ltc2945_of_match);

+/**
+ * struct ltc2945_data - LTC2945 device data
+ * @regmap: regmap device
+ * @shunt_resistor: shunt resistor value in micro ohms (1000 by default)
+ */
+struct ltc2945_data {
+ struct regmap *regmap;
+ u32 shunt_resistor;
+};
+
static inline bool is_power_reg(u8 reg)
{
return reg < LTC2945_SENSE_H;
@@ -72,7 +82,9 @@ static inline bool is_power_reg(u8 reg)
/* Return the value from the given register in uW, mV, or mA */
static int ltc2945_reg_to_val(struct device *dev, u8 reg, u64 *regval)
{
- struct regmap *regmap = dev_get_drvdata(dev);
+ struct ltc2945_data *data = dev_get_drvdata(dev);
+ struct regmap *regmap = data->regmap;
+ u32 shunt_resistor = data->shunt_resistor;
unsigned int control;
u8 buf[3];
u64 val;
@@ -98,9 +110,7 @@ static int ltc2945_reg_to_val(struct device *dev, u8 reg, u64 *regval)
case LTC2945_MAX_POWER_THRES_H:
case LTC2945_MIN_POWER_THRES_H:
/*
- * Convert to uW by assuming current is measured with
- * an 1mOhm sense resistor, similar to current
- * measurements.
+ * Convert to uW
* Control register bit 0 selects if voltage at SENSE+/VDD
* or voltage at ADIN is used to measure power.
*/
@@ -114,6 +124,9 @@ static int ltc2945_reg_to_val(struct device *dev, u8 reg, u64 *regval)
/* 0.5 mV * 25 uV = 0.0125 uV resolution. */
val = (val * 25LL) >> 1;
}
+ val *= 1000;
+ val = DIV_ROUND_CLOSEST_ULL(val, shunt_resistor);
+
break;
case LTC2945_VIN_H:
case LTC2945_MAX_VIN_H:
@@ -136,14 +149,9 @@ static int ltc2945_reg_to_val(struct device *dev, u8 reg, u64 *regval)
case LTC2945_MIN_SENSE_H:
case LTC2945_MAX_SENSE_THRES_H:
case LTC2945_MIN_SENSE_THRES_H:
- /*
- * 25 uV resolution. Convert to current as measured with
- * an 1 mOhm sense resistor, in mA. If a different sense
- * resistor is installed, calculate the actual current by
- * dividing the reported current by the sense resistor value
- * in mOhm.
- */
- val *= 25;
+ /* 25 uV resolution. Convert to mA. */
+ val *= 25 * 1000;
+ val = DIV_ROUND_CLOSEST_ULL(val, shunt_resistor);
break;
default:
return -EINVAL;
@@ -153,9 +161,11 @@ static int ltc2945_reg_to_val(struct device *dev, u8 reg, u64 *regval)
}

static int ltc2945_val_to_reg(struct device *dev, u8 reg,
- unsigned long val, unsigned long *regval)
+ u64 val, u64 *regval)
{
- struct regmap *regmap = dev_get_drvdata(dev);
+ struct ltc2945_data *data = dev_get_drvdata(dev);
+ struct regmap *regmap = data->regmap;
+ u32 shunt_resistor = data->shunt_resistor;
unsigned int control;
int ret;

@@ -166,9 +176,6 @@ static int ltc2945_val_to_reg(struct device *dev, u8 reg,
case LTC2945_MAX_POWER_THRES_H:
case LTC2945_MIN_POWER_THRES_H:
/*
- * Convert to register value by assuming current is measured
- * with an 1mOhm sense resistor, similar to current
- * measurements.
* Control register bit 0 selects if voltage at SENSE+/VDD
* or voltage at ADIN is used to measure power, which in turn
* determines register calculations.
@@ -178,14 +185,16 @@ static int ltc2945_val_to_reg(struct device *dev, u8 reg,
return ret;
if (control & CONTROL_MULT_SELECT) {
/* 25 mV * 25 uV = 0.625 uV resolution. */
- val = DIV_ROUND_CLOSEST(val, 625);
+ val *= shunt_resistor;
+ val = DIV_ROUND_CLOSEST_ULL(val, 625 * 1000);
} else {
/*
* 0.5 mV * 25 uV = 0.0125 uV resolution.
* Divide first to avoid overflow;
* accept loss of accuracy.
*/
- val = DIV_ROUND_CLOSEST(val, 25) * 2;
+ val *= shunt_resistor;
+ val = DIV_ROUND_CLOSEST_ULL(val, 25 * 1000) * 2;
}
break;
case LTC2945_VIN_H:
@@ -209,14 +218,9 @@ static int ltc2945_val_to_reg(struct device *dev, u8 reg,
case LTC2945_MIN_SENSE_H:
case LTC2945_MAX_SENSE_THRES_H:
case LTC2945_MIN_SENSE_THRES_H:
- /*
- * 25 uV resolution. Convert to current as measured with
- * an 1 mOhm sense resistor, in mA. If a different sense
- * resistor is installed, calculate the actual current by
- * dividing the reported current by the sense resistor value
- * in mOhm.
- */
- val = DIV_ROUND_CLOSEST(val, 25);
+ /* 25 uV resolution. Convert to mA. */
+ val *= shunt_resistor;
+ val = DIV_ROUND_CLOSEST_ULL(val, 25 * 1000);
break;
default:
return -EINVAL;
@@ -243,12 +247,13 @@ static ssize_t ltc2945_value_store(struct device *dev,
const char *buf, size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
- struct regmap *regmap = dev_get_drvdata(dev);
+ struct ltc2945_data *data = dev_get_drvdata(dev);
+ struct regmap *regmap = data->regmap;
u8 reg = attr->index;
unsigned long val;
u8 regbuf[3];
int num_regs;
- unsigned long regval;
+ u64 regval;
int ret;

ret = kstrtoul(buf, 10, &val);
@@ -281,7 +286,8 @@ static ssize_t ltc2945_history_store(struct device *dev,
const char *buf, size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
- struct regmap *regmap = dev_get_drvdata(dev);
+ struct ltc2945_data *data = dev_get_drvdata(dev);
+ struct regmap *regmap = data->regmap;
u8 reg = attr->index;
int num_regs = is_power_reg(reg) ? 3 : 2;
u8 buf_min[3] = { 0xff, 0xff, 0xff };
@@ -333,7 +339,8 @@ static ssize_t ltc2945_bool_show(struct device *dev,
struct device_attribute *da, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
- struct regmap *regmap = dev_get_drvdata(dev);
+ struct ltc2945_data *data = dev_get_drvdata(dev);
+ struct regmap *regmap = data->regmap;
unsigned int fault;
int ret;

@@ -462,6 +469,12 @@ static int ltc2945_probe(struct i2c_client *client)
struct device *dev = &client->dev;
struct device *hwmon_dev;
struct regmap *regmap;
+ struct ltc2945_data *data;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+ dev_set_drvdata(dev, data);

regmap = devm_regmap_init_i2c(client, &ltc2945_regmap_config);
if (IS_ERR(regmap)) {
@@ -469,11 +482,19 @@ static int ltc2945_probe(struct i2c_client *client)
return PTR_ERR(regmap);
}

+ data->regmap = regmap;
+ if (device_property_read_u32(dev, "shunt-resistor-micro-ohms",
+ &data->shunt_resistor))
+ data->shunt_resistor = 1000;
+
+ if (data->shunt_resistor == 0)
+ return -EINVAL;
+
/* Clear faults */
regmap_write(regmap, LTC2945_FAULT, 0x00);

hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
- regmap,
+ data,
ltc2945_groups);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
--
2.25.1
\
 
 \ /
  Last update: 2023-03-26 23:34    [W:0.082 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site