lkml.org 
[lkml]   [2023]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/6] rpmsg: glink: Fail qcom_glink_tx() once remove has been initiated
Date
Upon removing the glink edge communication is at best one-way. This
means that the very common scenario of glink requesting intents will not
be possible to serve.

Typically a successful transmission results in the client waiting for a
response, with some timeout and a mechanism for aborting that timeout.

Because of this, once the glink edge is defunct once removal is
commenced it's better to fail transmissions fast.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
drivers/rpmsg/qcom_glink_native.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)

diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index db5d946d5901..d81d0729493e 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -90,6 +90,7 @@ struct glink_core_rx_intent {
* @intentless: flag to indicate that there is no intent
* @tx_avail_notify: Waitqueue for pending tx tasks
* @sent_read_notify: flag to check cmd sent or not
+ * @abort_tx: flag indicating that all tx attempts should fail
*/
struct qcom_glink {
struct device *dev;
@@ -111,6 +112,8 @@ struct qcom_glink {
bool intentless;
wait_queue_head_t tx_avail_notify;
bool sent_read_notify;
+
+ bool abort_tx;
};

enum {
@@ -326,12 +329,22 @@ static int qcom_glink_tx(struct qcom_glink *glink,

spin_lock_irqsave(&glink->tx_lock, flags);

+ if (glink->abort_tx) {
+ ret = -EIO;
+ goto out;
+ }
+
while (qcom_glink_tx_avail(glink) < tlen) {
if (!wait) {
ret = -EAGAIN;
goto out;
}

+ if (glink->abort_tx) {
+ ret = -EIO;
+ goto out;
+ }
+
if (!glink->sent_read_notify) {
glink->sent_read_notify = true;
qcom_glink_send_read_notify(glink);
@@ -1763,11 +1776,18 @@ static int qcom_glink_remove_device(struct device *dev, void *data)
void qcom_glink_native_remove(struct qcom_glink *glink)
{
struct glink_channel *channel;
+ unsigned long flags;
int cid;
int ret;

qcom_glink_cancel_rx_work(glink);

+ /* Fail all attempts at sending messages */
+ spin_lock_irqsave(&glink->tx_lock, flags);
+ glink->abort_tx = true;
+ wake_up_all(&glink->tx_avail_notify);
+ spin_unlock_irqrestore(&glink->tx_lock, flags);
+
ret = device_for_each_child(glink->dev, NULL, qcom_glink_remove_device);
if (ret)
dev_warn(glink->dev, "Can't remove GLINK devices: %d\n", ret);
--
2.37.3
\
 
 \ /
  Last update: 2023-03-26 23:34    [W:0.090 / U:2.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site