lkml.org 
[lkml]   [2023]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1 08/11] dt-bindings: usb: Add binding for Via lab VL817Q7 hub controller
Hi Matthias,

On Thu, 5 Jan 2023 at 04:07, Matthias Kaehlcke <mka@chromium.org> wrote:
>
> On Wed, Dec 28, 2022 at 10:03:17AM +0000, Anand Moon wrote:
> > The VIA Lab VL817-Q7 is a USB 3.1 Gen 1 4-Port hub controller that
> > features 4 downstream ports, an internal 5V regulator and has
> > external reset pin.
> >
> > Add a device tree binding for its USB protocol part.
> > The internal LDO is not covered by this and can just be modelled
> > as a fixed regulator.
> >
> > Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> > ---
> > .../bindings/usb/vialab,vl817q7.yaml | 47 +++++++++++++++++++
> > 1 file changed, 47 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/usb/vialab,vl817q7.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/usb/vialab,vl817q7.yaml b/Documentation/devicetree/bindings/usb/vialab,vl817q7.yaml
> > new file mode 100644
> > index 000000000000..4ae995160fd5
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/vialab,vl817q7.yaml
> > @@ -0,0 +1,47 @@
> > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Via labs VL817Q7 USB 3.1 hub controller
>
> nit: VIA Labs VL817-Q7
>
Ok
> > +
> > +maintainers:
> > + - Anand Moon <linux.amoon@gmail.com>
> > +
> > +allOf:
> > + - $ref: usb-device.yaml#
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - vialab,usb2109
>
> This is not a valid compatible string as Johan already noted.
>
> Besides that the VL817-Q7 provides both a 3.1 and a 2.0 USB hub, which
> are enumerated separately. Please also add a compatible string for the
> 2.0 hub (assuming 0x2109 is the 3.1 hub).
>
Yes, correct,
actually, I would like to rename this file to vialab,vl817.yaml
since vialab,vl817-q7 is used for USB 3.1 hub and vialab,vl817-q5 is
used for USB 2.0 hub.

[0] https://datasheet.lcsc.com/lcsc/1808111624_VIA-Tech-VL817-Q7-B0_C209756.pdf

> > +
> > + reg: true
> > +
> > + reset-gpios:
> > + description: GPIO controlling the RESET# pin.
> > +
> > + vdd-supply:
> > + description:
> > + the regulator that provides 5.0V core power to the hub.
> > +
> > +required:
> > + - compatible
> > + - reg
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/gpio/gpio.h>
> > + usb {
> > + dr_mode = "host";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + hub: hub@1 {
> > + compatible = "vialab,usb2109"
> > + reg = <1>;
> > + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
> > + };
>
> Please also add a node for the other hub and link the two nodes with
> each other through the 'peer-hub' property. See realtek,rts5411.yaml
> for reference.

Ok, I will update the example according,

Thanks

-Anand.

\
 
 \ /
  Last update: 2023-03-26 23:31    [W:0.119 / U:1.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site