lkml.org 
[lkml]   [2023]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 1/1] vfio/type1: Respect IOMMU reserved regions in vfio_test_domain_fgsp()
From
On 1/4/23 10:42 AM, Niklas Schnelle wrote:
> Since commit cbf7827bc5dc ("iommu/s390: Fix potential s390_domain
> aperture shrinking") the s390 IOMMU driver uses reserved regions for the
> system provided DMA ranges of PCI devices. Previously it reduced the
> size of the IOMMU aperture and checked it on each mapping operation.
> On current machines the system denies use of DMA addresses below 2^32 for
> all PCI devices.
>
> Usually mapping IOVAs in a reserved regions is harmless until a DMA
> actually tries to utilize the mapping. However on s390 there is
> a virtual PCI device called ISM which is implemented in firmware and
> used for cross LPAR communication. Unlike real PCI devices this device
> does not use the hardware IOMMU but inspects IOMMU translation tables
> directly on IOTLB flush (s390 RPCIT instruction). If it detects IOVA
> mappings outside the allowed ranges it goes into an error state. This
> error state then causes the device to be unavailable to the KVM guest.
>
> Analysing this we found that vfio_test_domain_fgsp() maps 2 pages at DMA
> address 0 irrespective of the IOMMUs reserved regions. Even if usually
> harmless this seems wrong in the general case so instead go through the
> freshly updated IOVA list and try to find a range that isn't reserved,
> and fits 2 pages, is PAGE_SIZE * 2 aligned. If found use that for
> testing for fine grained super pages.
>
> Fixes: 6fe1010d6d9c ("vfio/type1: DMA unmap chunking")
> Reported-by: Matthew Rosato <mjrosato@linux.ibm.com>
> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>

Thanks, this fixes the issue I'm seeing with ISM.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>


\
 
 \ /
  Last update: 2023-03-26 23:28    [W:0.087 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site