Messages in this thread | | | From | Sinthu Raja <> | Subject | [PATCH V4 0/3] AM68 SK: Add initial support | Date | Thu, 5 Jan 2023 20:47:37 +0530 |
| |
From: Sinthu Raja <sinthu.raja@ti.com>
Hi All, Respinning this series after rebasing to 6.2.rc1. This series of patches add support for AM68 Starter kit(SK). AM68 SK is a low cost, small form factor board designed for TI’s AM68 SoC.
Refer below link to AM68 Technical Reference Manual for further details: http://www.ti.com/lit/pdf/spruj28
Design files can be referrred from https://www.ti.com/lit/zip/SPRR463
Changes in V4: ============= Repost after rebasing to 6.2 rc1
Changes in V3: ============== Addressed all the review comments and the changes are captured in separate patches. - Removed the unused nodes that are disabled by default. - Updated the gpio regulator node: gpio-regulator-tlv to "regulator-tlv".
V1: https://lore.kernel.org/linux-arm-kernel/20221018123849.23695-1-sinthu.raja@ti.com/t/#mbe43b02221733bb6eb06b203359e90ec08406afc V2: https://lore.kernel.org/lkml/20221107123852.8063-1-sinthu.raja@ti.com/ V3: https://lore.kernel.org/linux-arm-kernel/20221115154832.19759-1-sinthu.raja@ti.com/
Sinthu Raja (3): dt-bindings: arm: ti: Add binding for AM68 SK arm64: dts: ti: Add initial support for AM68 SK System on Module arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board
.../devicetree/bindings/arm/ti/k3.yaml | 1 + arch/arm64/boot/dts/ti/Makefile | 2 + .../boot/dts/ti/k3-am68-sk-base-board.dts | 335 ++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi | 31 ++ 4 files changed, 369 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
-- 2.36.1
| |