lkml.org 
[lkml]   [2023]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 4/4] riscv: dts: allwinner: d1: Add video engine node
From
Hi Paul,

On 1/5/23 04:11, Paul Kocialkowski wrote:
> On Sat 31 Dec 22, 10:46, Samuel Holland wrote:
>> D1 contains a video engine which is supported by the Cedrus driver.
>
> Does it work "outside the box" without power domain management?
> If not, it might be a bit confusing to add the node at this point.

Yes, it does. All of the power domains are enabled by default. However,
if the PPU series is merged first, I will respin this to include the
power-domains property from the beginning.

Regards,
Samuel

>> Signed-off-by: Samuel Holland <samuel@sholland.org>
>> ---
>>
>> arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>>
>> diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
>> index dff363a3c934..4bd374279155 100644
>> --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
>> +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
>> @@ -34,6 +34,17 @@ soc {
>> #address-cells = <1>;
>> #size-cells = <1>;
>>
>> + ve: video-codec@1c0e000 {
>> + compatible = "allwinner,sun20i-d1-video-engine";
>> + reg = <0x1c0e000 0x2000>;
>> + interrupts = <SOC_PERIPHERAL_IRQ(66) IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&ccu CLK_BUS_VE>,
>> + <&ccu CLK_VE>,
>> + <&ccu CLK_MBUS_VE>;
>> + clock-names = "ahb", "mod", "ram";
>> + resets = <&ccu RST_BUS_VE>;
>> + };
>> +
>> pio: pinctrl@2000000 {
>> compatible = "allwinner,sun20i-d1-pinctrl";
>> reg = <0x2000000 0x800>;
>> --
>> 2.37.4
>>
>

\
 
 \ /
  Last update: 2023-03-26 23:28    [W:0.104 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site