lkml.org 
[lkml]   [2023]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [REGRESSION] suspend to ram fails in 6.2-rc1 due to tpm errors
From
On 29.12.22 05:03, Jason A. Donenfeld wrote:
> On Wed, Dec 28, 2022 at 06:07:25PM -0500, James Bottomley wrote:
>> On Wed, 2022-12-28 at 21:22 +0100, Vlastimil Babka wrote:
>>> Ugh, while the problem [1] was fixed in 6.1, it's now happening again
>>> on the T460 with 6.2-rc1. Except I didn't see any oops message or
>>> "tpm_try_transmit" error this time. The first indication of a problem
>>> is this during a resume from suspend to ram:
>>>
>>> tpm tpm0: A TPM error (28) occurred continue selftest
>>>
>>> and then periodically
>>>
>>> tpm tpm0: A TPM error (28) occurred attempting get random
>>
>> That's a TPM 1.2 error which means the TPM failed the selftest. The
>> original problem was reported against TPM 2.0 because of a missing
>> try_get_ops().
>
> No, I'm pretty sure the original bug, which was fixed by "char: tpm:
> Protect tpm_pm_suspend with locks" regards 1.2 as well, especially
> considering it's the same hardware from Vlastimil causing this. I also
> recall seeing this in 1.2 when I ran this with the TPM emulator. So
> that's not correct.

James, are you or some other TPM developer looking into this? Or is this
deadlocked now? And if so: how can we get this unstuck to get this
regression solved?

Side note: I wonder if the problem that Johannes reported yesterday in
this thread (
https://lore.kernel.org/all/Y7VCcgHUC6JtnO2b@gmail.com/
) is related or something else, as it seems his issue happens with 6.1,
while Vlastimil's problems should be fixed there. Or am I missing something?

Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
--
Everything you wanna know about Linux kernel regression tracking:
https://linux-regtracking.leemhuis.info/about/#tldr
If I did something stupid, please tell me, as explained on that page.

>> The tpm 1.2 command path was never changed to require
>> this (and in fact hasn't changed for ages, TPM 1.2 being a bit
>> obsolete).
>
> False. I'll just copy and paste the diff of that commit:
>
> diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
> index 1621ce818705..d69905233aff 100644
> --- a/drivers/char/tpm/tpm-interface.c
> +++ b/drivers/char/tpm/tpm-interface.c
> @@ -401,13 +401,14 @@ int tpm_pm_suspend(struct device *dev)
> !pm_suspend_via_firmware())
> goto suspended;
>
> - if (!tpm_chip_start(chip)) {
> + rc = tpm_try_get_ops(chip);
> + if (!rc) {
> if (chip->flags & TPM_CHIP_FLAG_TPM2)
> tpm2_shutdown(chip, TPM2_SU_STATE);
> else
> rc = tpm1_pm_suspend(chip, tpm_suspend_pcr);
>
> - tpm_chip_stop(chip);
> + tpm_put_ops(chip);
> }
>
> suspended:
>
>
> So, as you can see, this affects the call to tpm1_pm_suspend.
>
>> So this looks like a new problem with TPM 1.2 and
>> suspend/resume, likely in the BIOS of your system.
>
> No, this is not a BIOS problem. This is a kernel bug in the TPM 1.2
> driver. Yes, it'd be very nice to wave this all away and blame it on the
> BIOS, but I really don't think that's the case, especially considering
> this is all reproducible in the emulator.
>
> I recall seeing something pretty similar to this report with the
> selftest as well. Basically, the call to tpm1_do_selftest can race with
> the call to tpm1_get_random, presumably because tpm1_get_random doesn't
> do any locking on its own. So it might be a good idea to make sure that
> tpm1_get_random() isn't running before tpm1_do_selftest() or any other
> TPM commands run.
>
> I spent a long time working through the TPM code when this came up
> during 6.1. I set up the TPM emulator with QEMU and reproduced this and
> had a whole test setup and S3 fuzzer. It took a long time, and when I was
> done, I paged it all out of my brain. When I found that patch from Jan
> that fixed the problem most of the time (but not all the time), I wasted
> tons of time trying to get the TPM maintainers to take the patch and
> send it to Linus as part of rc7 or rc8. But they all ignored me, and
> eventually Linus just took that patch directly.
>
> So I don't think I want to go down another rabbit hole here, having
> experienced the TPM maintainers not really caring much, and that sucking
> away the remaining energy I had before to keep looking at the issue and
> its edge cases not handled by Jan's patch.
>
> On the contrary, it'd make a big difference if the TPM maintainers could
> actually help analyze the code that they're most familiar with, so that
> we can get to the bottom of this. That's a lot better than some random
> drive-by patches from a non-TPM person like me; before the 6.1 bug, I'd
> never even looked at these drivers.
>
> My plan is to therefore be available to help and analyze and test and
> maybe even write some code, if the TPM maintainers take the lead on
> getting to the bottom of this. But if this hits neglect again like last
> time, I'll just send a `depends on BROKEN if PM` patch to the TPM
> hw_random driver and see what happens... That's a really awful solution
> though, so I hope the maintainers will wake up this cycle.
>
> Regards,
> Jason
>
>

\
 
 \ /
  Last update: 2023-03-26 23:28    [W:0.176 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site