lkml.org 
[lkml]   [2023]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v7 9/9] drm/bridge: it6505: Register Type C mode switches
    Date
    Register USB Type-C mode switches when the "mode-switch" property and
    relevant port are available in Device Tree. Configure the "lane_swap"
    state based on the entered alternate mode for a specific Type-C
    connector, which ends up updating the lane swap registers of the it6505
    chip.

    Signed-off-by: Pin-yen Lin <treapking@chromium.org>

    ---

    Changes in v7:
    - Fixed style issues in it6505 driver
    - Removed the redundant sleep in it6505 driver
    - Removed DT property validation in it6505 driver
    - Rebased to drm-misc-next
    - Extracted common codes to another commit

    Changes in v6:
    - Changed it6505_typec_mux_set callback function to accommodate with
    the latest drm-misc patches
    - Changed the driver implementation to accommodate with the new binding
    - Squashed to a single patch

    drivers/gpu/drm/bridge/Kconfig | 1 +
    drivers/gpu/drm/bridge/ite-it6505.c | 119 +++++++++++++++++++++++++++-
    2 files changed, 116 insertions(+), 4 deletions(-)

    diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
    index 737578dd57ed..33803f581562 100644
    --- a/drivers/gpu/drm/bridge/Kconfig
    +++ b/drivers/gpu/drm/bridge/Kconfig
    @@ -87,6 +87,7 @@ config DRM_FSL_LDB
    config DRM_ITE_IT6505
    tristate "ITE IT6505 DisplayPort bridge"
    depends on OF
    + depends on TYPEC || TYPEC=n
    select DRM_DISPLAY_DP_HELPER
    select DRM_DISPLAY_HDCP_HELPER
    select DRM_DISPLAY_HELPER
    diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
    index 9cda2df21b88..d9be09e889e2 100644
    --- a/drivers/gpu/drm/bridge/ite-it6505.c
    +++ b/drivers/gpu/drm/bridge/ite-it6505.c
    @@ -17,6 +17,8 @@
    #include <linux/regmap.h>
    #include <linux/regulator/consumer.h>
    #include <linux/types.h>
    +#include <linux/usb/typec_dp.h>
    +#include <linux/usb/typec_mux.h>
    #include <linux/wait.h>

    #include <crypto/hash.h>
    @@ -28,6 +30,7 @@
    #include <drm/drm_crtc.h>
    #include <drm/drm_crtc_helper.h>
    #include <drm/drm_edid.h>
    +#include <drm/drm_of.h>
    #include <drm/drm_print.h>
    #include <drm/drm_probe_helper.h>

    @@ -455,6 +458,7 @@ struct it6505 {
    struct delayed_work delayed_audio;
    struct it6505_audio_data audio;
    struct dentry *debugfs;
    + struct drm_dp_typec_switch_desc switch_desc;

    /* it6505 driver hold option */
    bool enable_drv_hold;
    @@ -3346,12 +3350,105 @@ static void it6505_shutdown(struct i2c_client *client)
    it6505_lane_off(it6505);
    }

    +static void it6505_typec_ports_update(struct it6505 *it6505)
    +{
    + struct drm_dp_typec_switch_desc switch_desc = it6505->switch_desc;
    +
    + /* Check if both ports available and do nothing to retain the current one */
    + if (switch_desc.typec_ports[0].dp_connected && switch_desc.typec_ports[1].dp_connected)
    + return;
    +
    + if (switch_desc.typec_ports[0].dp_connected)
    + it6505->lane_swap = false;
    + else if (switch_desc.typec_ports[1].dp_connected)
    + it6505->lane_swap = true;
    +}
    +
    +static int it6505_typec_mux_set(struct typec_mux_dev *mux,
    + struct typec_mux_state *state)
    +{
    + struct drm_dp_typec_port_data *port_data = typec_mux_get_drvdata(mux);
    + struct it6505 *it6505 = (struct it6505 *) port_data->data;
    + struct device *dev = &it6505->client->dev;
    + struct drm_dp_typec_switch_desc switch_desc = it6505->switch_desc;
    + bool old_dp_connected, new_dp_connected;
    +
    + if (switch_desc.num_typec_switches == 1)
    + return 0;
    +
    + mutex_lock(&it6505->extcon_lock);
    +
    + old_dp_connected = switch_desc.typec_ports[0].dp_connected ||
    + switch_desc.typec_ports[1].dp_connected;
    +
    + port_data->dp_connected = state->alt &&
    + state->alt->svid == USB_TYPEC_DP_SID &&
    + state->alt->mode == USB_TYPEC_DP_MODE;
    +
    + dev_dbg(dev, "mux_set dp_connected: c0=%d, c1=%d\n",
    + switch_desc.typec_ports[0].dp_connected, switch_desc.typec_ports[1].dp_connected);
    +
    + new_dp_connected = switch_desc.typec_ports[0].dp_connected ||
    + switch_desc.typec_ports[1].dp_connected;
    +
    + if (it6505->enable_drv_hold) {
    + dev_dbg(dev, "enable driver hold\n");
    + goto unlock;
    + }
    +
    + it6505_typec_ports_update(it6505);
    +
    + if (!old_dp_connected && new_dp_connected) {
    + int ret = pm_runtime_get_sync(dev);
    +
    + /*
    + * pm_runtime_force_suspend() disables runtime PM when the
    + * system enters suspend state. But on system resume, mux_set
    + * can be triggered before pm_runtime_force_resume() re-enables
    + * runtime PM. This makes the bridge stay powered off if the
    + * downstream display is connected when the system is suspended.
    + * Handling the error here to make sure the bridge is powered
    + * on, and leave the PM runtime usage count incremented so
    + * the future runtime PM calls is balanced.
    + */
    + if (ret < 0)
    + it6505_poweron(it6505);
    +
    + complete_all(&it6505->extcon_completion);
    + }
    +
    + if (old_dp_connected && !new_dp_connected) {
    + reinit_completion(&it6505->extcon_completion);
    + pm_runtime_put_sync(dev);
    + if (it6505->bridge.dev)
    + drm_helper_hpd_irq_event(it6505->bridge.dev);
    + memset(it6505->dpcd, 0, sizeof(it6505->dpcd));
    + }
    +
    +unlock:
    + mutex_unlock(&it6505->extcon_lock);
    + return 0;
    +}
    +
    +static void it6505_unregister_typec_switches(struct it6505 *it6505)
    +{
    + drm_dp_unregister_typec_switches(&it6505->switch_desc);
    +}
    +
    +static int it6505_register_typec_switches(struct device *dev, struct it6505 *it6505)
    +{
    + struct device_node *port = of_graph_get_port_by_id(dev->of_node, 1);
    +
    + return drm_dp_register_typec_switches(dev, port, &it6505->switch_desc,
    + it6505, it6505_typec_mux_set);
    +}
    +
    static int it6505_i2c_probe(struct i2c_client *client)
    {
    struct it6505 *it6505;
    struct device *dev = &client->dev;
    struct extcon_dev *extcon;
    - int err, intp_irq;
    + int err, intp_irq, ret;

    it6505 = devm_kzalloc(&client->dev, sizeof(*it6505), GFP_KERNEL);
    if (!it6505)
    @@ -3371,11 +3468,24 @@ static int it6505_i2c_probe(struct i2c_client *client)
    if (PTR_ERR(extcon) == -EPROBE_DEFER)
    return -EPROBE_DEFER;
    if (IS_ERR(extcon)) {
    - dev_err(dev, "can not get extcon device!");
    - return PTR_ERR(extcon);
    + if (PTR_ERR(extcon) != -ENODEV)
    + dev_warn(dev, "Cannot get extcon device: %ld\n",
    + PTR_ERR(extcon));
    + it6505->extcon = NULL;
    + } else {
    + it6505->extcon = extcon;
    }

    - it6505->extcon = extcon;
    + ret = it6505_register_typec_switches(dev, it6505);
    + if (ret) {
    + if (ret != -ENODEV)
    + dev_warn(dev, "Didn't register Type-C switches, err: %d\n",
    + ret);
    + if (!it6505->extcon) {
    + dev_err(dev, "Both extcon and typec-switch are not registered.\n");
    + return -EINVAL;
    + }
    + }

    it6505->regmap = devm_regmap_init_i2c(client, &it6505_regmap_config);
    if (IS_ERR(it6505->regmap)) {
    @@ -3447,6 +3557,7 @@ static void it6505_i2c_remove(struct i2c_client *client)
    it6505_debugfs_remove(it6505);
    it6505_poweroff(it6505);
    it6505_remove_edid(it6505);
    + it6505_unregister_typec_switches(it6505);
    }

    static const struct i2c_device_id it6505_id[] = {
    --
    2.39.0.314.g84b9a713c41-goog
    \
     
     \ /
      Last update: 2023-03-26 23:28    [W:6.777 / U:0.040 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site