lkml.org 
[lkml]   [2023]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] leds: simatic-ipc-leds-gpio: make sure we have the GPIO providing driver
On Wed, Jan 04, 2023 at 08:30:05PM +0100, Henning Schild wrote:
> Am Wed, 4 Jan 2023 17:51:33 +0200
> schrieb Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
> > On Wed, Jan 04, 2023 at 03:39:24PM +0100, Henning Schild wrote:
> > > Am Wed, 4 Jan 2023 14:24:30 +0000
> > > schrieb Lee Jones <lee@kernel.org>:

...

> > > As we speak i already have the third box to eventually support,
> > > which will likely be similar but this time around with
> > > PINCTRL_ELKHARTLAKE
> >
> > A bit of offtopic here.
> >
> > Are you able to get / fix / ... the firmware to work with the
> > upstreamed version of pin control driver for Intel Elkhart Lake?
> >
> > (I'm asking this in terms of the
> > https://bugzilla.kernel.org/show_bug.cgi?id=213365)
> >
>
> I can not tell. At the moment i am in a Siemens internal review where i
> see code that is not even close to being ready for upstream. Somewhat
> open-coded again from what it looks like.
>
> And i do not have the machine the code is for.
>
> Let me say "it is complicated" but some point in time a device with
> LEDs attached to PINCTRL_ELKHARTLAKE will be proposed. Likely by me,
> when i hopefully have such a device on my desk.

Thanks for the information.

Consider above just as a point to be aware of when you come to
the productization, so we won't need another pin control driver for
the same chip.

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2023-03-26 23:28    [W:0.096 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site