lkml.org 
[lkml]   [2023]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3] ARM: dts: dove.dtsi: Move ethphy to fix schema error
Date
Michał Grzelak <mig@semihalf.com> writes:

> Running 'make dtbs_check' with schema in net/marvell,orion-mdio.yaml
> gives following warnings:
> mdio-bus@72004: Unevaluated properties are not allowed
> ('ethernet-phy' was unexpected)
> arch/arm/boot/dts/dove-cubox.dtb
> arch/arm/boot/dts/dove-cubox-es.dtb
> arch/arm/boot/dts/dove-d2plug.dtb
> arch/arm/boot/dts/dove-d2plug.dtb
> arch/arm/boot/dts/dove-dove-db.dtb
> arch/arm/boot/dts/dove-d3plug.dtb
> arch/arm/boot/dts/dove-sbc-a510.dtb
> As every subnode of mdio is expected to have an @X, ethernet-phy subnode
> in dove.dtsi doesn't have one. Fix these errors by moving ethernet-phy
> into relevant .dts files with correct @<reg address>.
>
> Signed-off-by: Michał Grzelak <mig@semihalf.com>

Applied on mvebu/dt

Thanks,

Gregory

> ---
> Changelog:
> v2->v3
> - edit commit message according to
> https://lore.kernel.org/all/Y6zuJrb+8j+XCksN@lunn.ch/
>
> v1->v2
> - remove patternProperties: from .yaml
> - move ethphy from dove.dtsi into relevant .dts files
>
> arch/arm/boot/dts/dove-cm-a510.dtsi | 14 +++++++++++---
> arch/arm/boot/dts/dove-cubox.dts | 15 +++++++++++----
> arch/arm/boot/dts/dove.dtsi | 5 -----
> 3 files changed, 22 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi
> index 9b9dfbe07be4..2f2f0a4bf004 100644
> --- a/arch/arm/boot/dts/dove-cm-a510.dtsi
> +++ b/arch/arm/boot/dts/dove-cm-a510.dtsi
> @@ -124,9 +124,17 @@ wifi_power: regulator@1 {
> };
>
> /* Optional RTL8211D GbE PHY on SMI address 0x03 */
> -&ethphy {
> - reg = <3>;
> - status = "disabled";
> +&mdio {
> + ethphy: ethernet-phy@3 {
> + reg = <3>;
> + status = "disabled";
> + };
> +};
> +
> +&eth {
> + ethernet-port@0 {
> + phy-handle = <&ethphy>;
> + };
> };
>
> &i2c0 {
> diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
> index 2639b9fe0ab4..170c14d7f5c8 100644
> --- a/arch/arm/boot/dts/dove-cubox.dts
> +++ b/arch/arm/boot/dts/dove-cubox.dts
> @@ -72,11 +72,18 @@ gpu-subsystem {
> &uart0 { status = "okay"; };
> &sata0 { status = "okay"; };
> &mdio { status = "okay"; };
> -&eth { status = "okay"; };
> +&eth {
> + status = "okay";
> + ethernet-port@0 {
> + phy-handle = <&ethphy>;
> + };
> +};
>
> -&ethphy {
> - compatible = "marvell,88e1310";
> - reg = <1>;
> +&mdio {
> + ethphy: ethernet-phy@1 {
> + compatible = "marvell,88e1310";
> + reg = <1>;
> + };
> };
>
> &gpu {
> diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
> index 00a36fba2fd2..c7a3fa33c56e 100644
> --- a/arch/arm/boot/dts/dove.dtsi
> +++ b/arch/arm/boot/dts/dove.dtsi
> @@ -382,7 +382,6 @@ ethernet-port@0 {
> interrupts = <29>;
> /* overwrite MAC address in bootloader */
> local-mac-address = [00 00 00 00 00 00];
> - phy-handle = <&ethphy>;
> };
> };
>
> @@ -394,10 +393,6 @@ mdio: mdio-bus@72004 {
> interrupts = <30>;
> clocks = <&gate_clk 2>;
> status = "disabled";
> -
> - ethphy: ethernet-phy {
> - /* set phy address in board file */
> - };
> };
>
> sdio0: sdio-host@92000 {
> --
> 2.34.1
>

--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

\
 
 \ /
  Last update: 2023-03-27 00:03    [W:0.070 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site