lkml.org 
[lkml]   [2023]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: External USB disks not recognized with v6.1.8 when using Xen
[Leaving the full quote below for reference and adding more appropriate people.]

After a far too long round of git-bisect I narrowed it down to:

c1c59538337ab6d45700cb4a1c9725e67f59bc6e is the first bad commit

x86/pat: Fix pat_x_mtrr_type() for MTRR disabled case
commit 90b926e68f500844dff16b5bcea178dc55cf580a upstream.

And indeed, reverting this single commit from v6.1.8 (stable) makes the
disks appear again.

TL;DR: with v6.1.8 in Xen Dom0 mode (i.e. the Xen host itself) the
external disk enclosure attached via USB is not being recognized. When
booted *without* Xen, the disks show up just fine.

Details with dmesg and lsusb outputs:
https://nerdbynature.de/bits/usb_v6.1.8/

Thanks Thorsten for the localmodconfig hint, I've tried that before, but
the thing just did not want to boot, so I manually cut down on options,
but it's still ~12 minutes per compile, ccache helped a bit in the end.

Thanks for reading,
Christian.

On Mon, 30 Jan 2023, Linux kernel regression tracking (#adding) wrote:

> [TLDR: I'm adding this report to the list of tracked Linux kernel
> regressions; the text you find below is based on a few templates
> paragraphs you might have encountered already in similar form.
> See link in footer if these mails annoy you.]
>
> On 30.01.23 04:46, Christian Kujau wrote:
> > [CC stable as I only tested the stable tree for now]
> >
> > I'm running a current Alpine Linux with linux-edge-6.1.8-r0 installed on a
> > Lenovo Thinkpad L540 where an external disk enclosure with two disks is
> > attached via USB. The Alpine Linux kernel appears to track Linux stable
> > and is more or less vanilla. Also, the machine boots into Xen 4.17.0 and
> > then starts a few headless VMs, nothing too exotic here.
> >
> > But when updating from Linux 6.1.1 to 6.1.8, the disks from the external
> > enclosure did not show up. Unplug, replug, no dice, and this is 100%
> > reproducable. dmesg has new these lines now:
> >
> > +ioremap error for 0xf2520000-0xf2530000, requested 0x2, got 0x0
> > +ioremap error for 0xf2520000-0xf2530000, requested 0x2, got 0x0
> > +xhci_hcd 0000:00:14.0: init 0000:00:14.0 fail, -14
> > +ioremap error for 0xfed1f000-0xfed20000, requested 0x2, got 0x0
> > +iTCO_wdt iTCO_wdt.1.auto: ioremap failed for resource [mem 0xfed1f410-0xfed1f414]
> >
> > I'm not sure if the ioremap error is related here (booted with
> > early_ioremap_debug but then dmesg was filled with WARNINGS for both
> > versions, so I disabled it again), but that xhci_hcd error looks
> > suspicious.
> >
> > Curiously 6.1.8 works just fine when NOT booted via Xen. I booted into
> > Xen + vanilla 6.1.8 now and was able to reproduce this issue. Xen +
> > vanilla 6.1.1 works fine.
>
> Thanks for the report. To be sure the issue doesn't fall through the
> cracks unnoticed, I'm adding it to regzbot, the Linux kernel regression
> tracking bot:
>
> #regzbot ^introduced v6.1.1..v6.1.8
> #regzbot title xen/usb(?): External USB disks not recognized anymore
> under Xen
> #regzbot ignore-activity
>
> This isn't a regression? This issue or a fix for it are already
> discussed somewhere else? It was fixed already? You want to clarify when
> the regression started to happen? Or point out I got the title or
> something else totally wrong? Then just reply and tell me -- ideally
> while also telling regzbot about it, as explained by the page listed in
> the footer of this mail.
>
> Developers: When fixing the issue, remember to add 'Link:' tags pointing
> to the report (the parent of this mail). See page linked in footer for
> details.
>
> > From v6.1.1 to v6.1.8 there's only one commit in drivers/xen, but 54
> > commits in drivers/usb. Compiling takes time because the distribution
> > kernel has almost everything enabled and I still need to cut down enabled
> > options to be able to attempt a git biset in a reasonable time,
>
> FWIW, I'm working on a text for the kernel docs that will use
> "localmodconfig" to trim down the configs automatically. Maybe it's
> helpful for you, here is a draft:
>
> https://www.leemhuis.info/files/misc/How%20to%20quickly%20build%20a%20Linux%20kernel%20%E2%80%94%20The%20Linux%20Kernel%20documentation.html
>
> > but I
> > still wanted to report this, maybe someone has an idea about this.
> >
> > Full dmesg and lshw outputs: https://nerdbynature.de/bits/usb_v6.1.8/
> >
> > Thanks,
> > Christian.
> >
> > PS: I found this workaround on the interwebs[0] to force the USB ports
> > of that machine to USB 2.0 and then the missing disks magically appear:
> >
> > $ lspci -nn | grep -i usb
> > 00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05) <=== !!!
> > 00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05)
> > 00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05)
> >
> > $ setpci -H1 -d 8086:8c31 d8.l=0
> > $ setpci -H1 -d 8086:8c31 d0.l=0
> >
> > $ dmesg
> > usb 1-1.3: new full-speed USB device number 3 using ehci-pci
> > usb 2-1.3: new high-speed USB device number 3 using ehci-pci
> > usb 1-1.3: New USB device found, idVendor=138a, idProduct=0011, bcdDevice=0.78
> > usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
> > usb 1-1.3: SerialNumber: aa32bf84ed47
> > usb 1-1.5: new full-speed USB device number 4 using ehci-pci
> > usb 2-1.3: New USB device found, idVendor=1e91, idProduct=a3a8, bcdDevice=2.07
> > usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=5
> > usb 2-1.3: Product: Elite Pro Dual
> > usb 2-1.3: Manufacturer: OWC
> > usb 2-1.3: SerialNumber: RANDOM__1E359879645F
> > usb 2-1.3: UAS is ignored for this device, using usb-storage instead
> > usb-storage 2-1.3:1.0: USB Mass Storage device detected
> > usb-storage 2-1.3:1.0: Quirks match for vid 1e91 pid a3a8: 800000
> > scsi host5: usb-storage 2-1.3:1.0
> > usb 1-1.5: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice=0.01
> > usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> > Bluetooth: hci0: Legacy ROM 2.5 revision 8.0 build 1 week 45 2013
> > Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq
> > usb 1-1.6: new high-speed USB device number 5 using ehci-pci
> > usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b398, bcdDevice=39.98
> > usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> > usb 1-1.6: Product: Integrated Camera
> > usb 1-1.6: Manufacturer: Vimicro corp.
> > Bluetooth: hci0: Intel BT fw patch 0x2a completed & activated
> > scsi 5:0:0:0: Direct-Access ElitePro Dual U3FW-1 0207 PQ: 0 ANSI: 6
> > scsi 5:0:0:1: Direct-Access ElitePro Dual U3FW-2 0207 PQ: 0 ANSI: 6
> > sd 5:0:0:0: [sdc] Very big device. Trying to use READ CAPACITY(16).
> > sd 5:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
> > sd 5:0:0:1: [sdd] Very big device. Trying to use READ CAPACITY(16).
> > sd 5:0:0:1: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
> > sd 5:0:0:1: [sdd] Write Protect is off
> > sd 5:0:0:1: [sdd] Mode Sense: 47 00 10 08
> > sd 5:0:0:0: [sdc] Write Protect is off
> > sd 5:0:0:0: [sdc] Mode Sense: 47 00 10 08
> > sd 5:0:0:0: [sdc] No Caching mode page found
> > sd 5:0:0:0: [sdc] Assuming drive cache: write through
> > sd 5:0:0:1: [sdd] No Caching mode page found
> > sd 5:0:0:1: [sdd] Assuming drive cache: write through
> > sd 5:0:0:0: [sdc] Attached SCSI disk
> > sd 5:0:0:1: [sdd] Attached SCSI disk
> >
> > $ lsblk /dev/sd[cd]
> > NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
> > sdc 8:32 0 3.6T 0 disk
> > sdd 8:48 0 3.6T 0 disk
> >
> >
> > [0] https://superuser.com/a/875863/218574
>
> Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
> --
> Everything you wanna know about Linux kernel regression tracking:
> https://linux-regtracking.leemhuis.info/about/#tldr
> That page also explains what to do if mails like this annoy you.
>

--
BOFH excuse #188:

..disk or the processor is on fire.

\
 
 \ /
  Last update: 2023-03-27 00:04    [W:0.885 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site