lkml.org 
[lkml]   [2023]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5] ASoC: dt-bindings: Add tas2781 amplifier.
From
On 31/01/2023 14:17, Shenghao Ding wrote:
> Create tas2781.yaml for tas2781 driver.

You treat my feedback selectively... some things improved, but not
everything. I am literally repeating the same and expect different
results from you... isn't that the definition of insanity?

Let me paste ignored parts:

1. Your patches are still not correctly threaded. There is no threading
at all.

I said it multiple times. What else should I say here?

2. Subject: ASoC: dt-bindings: Add tas2781 amplifier
(drop the full stop - why did you add it there?)

3. Missing changelog under ---.
I mentioned it already few times, didn't I?

>
> Signed-off-by: Shenghao Ding <13916275206@139.com>
>
> ---
> Changes to be committed:
> new file: Documentation/devicetree/bindings/sound/ti,tas2781.yaml
> ---
> .../devicetree/bindings/sound/ti,tas2781.yaml | 87 +++++++++++++++++++
> 1 file changed, 87 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/ti,tas2781.yaml
>
> diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
> new file mode 100644
> index 000000000..9a440d29f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2022 - 2023 Texas Instruments Incorporated
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/ti,tas2781.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments TAS2781 SmartAMP
> +
> +maintainers:
> + - Shenghao Ding <shenghao-ding@ti.com>
> + - Kevin Lu <kevin-lu@ti.com>
> +
> +description: |
> + The TAS2781 is a mono, digital input Class-D audio amplifier
> + optimized for efficiently driving high peak power into small
> + loudspeakers. Integrated an on-chip DSP supports Texas Instruments
> + Smart Amp speaker protection algorithm. The integrated speaker
> + voltage and current sense provides for real time
> + monitoring of loudspeaker behavior.
> +
> +properties:
> + compatible:
> + enum:
> + - ti,tas2781
> +
> + reg:
> + maxItems: 1
> + description: |
> + I2C address of the device can be in range from 0x38 to 0x40.
> +
> + reset-gpios:
> + maxItems: 1
> + description: |
> + A GPIO line handling reset of the chip. As the line is active high,
> + it should be marked GPIO_ACTIVE_HIGH (see ../gpio/gpio.txt)

Drop the reference to gpio.txt.

I give up. I spent too much time on it while being also ignored a bit
too much.


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2023-03-27 00:04    [W:0.050 / U:0.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site