lkml.org 
[lkml]   [2023]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH V6 14/24] mmc: sdhci-uhs2: add set_ios()
From
On 26/01/23 12:58, Victor Shih wrote:
> Hi, Adrian
>
> On Fri, Jan 6, 2023 at 5:28 AM Adrian Hunter <adrian.hunter@intel.com> wrote:
>>
>> On 13/12/22 11:00, Victor Shih wrote:
>>> This is a sdhci version of mmc's set_ios operation.
>>> It covers both UHS-I and UHS-II.
>>>
>>> Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
>>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
>>> Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
>>> ---
>>> drivers/mmc/host/sdhci-uhs2.c | 96 +++++++++++++++++++++++++++++++++++
>>> drivers/mmc/host/sdhci-uhs2.h | 1 +
>>> drivers/mmc/host/sdhci.c | 53 +++++++++++--------
>>> drivers/mmc/host/sdhci.h | 2 +
>>> 4 files changed, 131 insertions(+), 21 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
>>> index 00b1b69b49ea..3d52d35a91a5 100644
>>> --- a/drivers/mmc/host/sdhci-uhs2.c
>>> +++ b/drivers/mmc/host/sdhci-uhs2.c
>>> @@ -213,6 +213,68 @@ void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
>>> }
>>> EXPORT_SYMBOL_GPL(sdhci_uhs2_set_timeout);
>>>
>>> +/**
>>> + * sdhci_uhs2_clear_set_irqs - set Error Interrupt Status Enable register
>>> + * @host: SDHCI host
>>> + * @clear: bit-wise clear mask
>>> + * @set: bit-wise set mask
>>> + *
>>> + * Set/unset bits in UHS-II Error Interrupt Status Enable register
>>> + */
>>> +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
>>> +{
>>> + u32 ier;
>>> +
>>> + ier = sdhci_readl(host, SDHCI_UHS2_INT_STATUS_ENABLE);
>>> + ier &= ~clear;
>>> + ier |= set;
>>> + sdhci_writel(host, ier, SDHCI_UHS2_INT_STATUS_ENABLE);
>>> + sdhci_writel(host, ier, SDHCI_UHS2_INT_SIGNAL_ENABLE);
>>> +}
>>> +EXPORT_SYMBOL_GPL(sdhci_uhs2_clear_set_irqs);
>>> +
>>> +static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>>> +{
>>> + struct sdhci_host *host = mmc_priv(mmc);
>>> + u8 cmd_res, dead_lock;
>>> + u16 ctrl_2;
>>> +
>>> + /* UHS2 Timeout Control */
>>> + sdhci_calc_timeout_uhs2(host, &cmd_res, &dead_lock);
>>> +
>>> + /* change to use calculate value */
>>> + cmd_res |= FIELD_PREP(SDHCI_UHS2_TIMER_CTRL_DEADLOCK_MASK, dead_lock);
>>> +
>>> + sdhci_uhs2_clear_set_irqs(host,
>>> + SDHCI_UHS2_INT_CMD_TIMEOUT |
>>> + SDHCI_UHS2_INT_DEADLOCK_TIMEOUT,
>>> + 0);
>>> + sdhci_writeb(host, cmd_res, SDHCI_UHS2_TIMER_CTRL);
>>> + sdhci_uhs2_clear_set_irqs(host, 0,
>>> + SDHCI_UHS2_INT_CMD_TIMEOUT |
>>> + SDHCI_UHS2_INT_DEADLOCK_TIMEOUT);
>>> +
>>> + /* UHS2 timing */
>>
>> Please extend comment to include:
>>
>> Note, UHS2 timing is disabled when powering off
>>
>>> + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
>>> + if (ios->timing == MMC_TIMING_SD_UHS2)
>>> + ctrl_2 |= SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE;
>>> + else
>>> + ctrl_2 &= ~(SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE);
>>> + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
>>> +
>>> + if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
>>> + sdhci_enable_preset_value(host, true);
>>> +
>>> + if (host->ops->set_power)
>>> + host->ops->set_power(host, ios->power_mode, ios->vdd);
>>> + else
>>> + sdhci_uhs2_set_power(host, ios->power_mode, ios->vdd);
>>
>> sdhci_set_ios_common() already set the power. Are both needed?
>>
>>> + udelay(100);
>>
>> Please add a comment for why this delay is here.
>>
>>> +
>>> + host->timing = ios->timing;
>>
>> Please move this up to where the timing change is.
>>
>
> The ios->timing was changed in sd_uhs2_power_up function and not
> modified in this function(__sdhci_uhs2_set_ios), therefore would you
> want me to move this to the sd_uhs2_power_up function?

No

>
> As I know the ios->timing is used in sdhci_set_clock function, setting
> the host->timing before call the sdhci_set_clock function ensures that
> the host->timing used in sdhci_set_clock function is the most recent
> value. What do you think about this?

I just meant move it below the timing chunk i.e.

/* UHS2 timing. Note, UHS2 timing is disabled when powering off */
ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
if (ios->timing == MMC_TIMING_SD_UHS2)
ctrl_2 |= SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE;
else
ctrl_2 &= ~(SDHCI_CTRL_UHS2 | SDHCI_CTRL_UHS2_ENABLE);
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
host->timing = ios->timing;

>
>>> + sdhci_set_clock(host, host->clock);
>>> +}
>>> +
>>> /*****************************************************************************\
>>> * *
>>> * MMC callbacks *
>>> @@ -234,6 +296,39 @@ static int sdhci_uhs2_start_signal_voltage_switch(struct mmc_host *mmc,
>>> return sdhci_start_signal_voltage_switch(mmc, ios);
>>> }
>>>
>>> +int sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>>
>> Should be static
>>
>>> +{
>>> + struct sdhci_host *host = mmc_priv(mmc);
>>> +
>>> + if (!(host->version >= SDHCI_SPEC_400) ||
>>> + !(host->mmc->flags & MMC_UHS2_SUPPORT &&
>>> + host->mmc->caps2 & MMC_CAP2_SD_UHS2)) {
>>
>> This can be just:
>>
>> if (!sdhci_uhs2_mode(host)) {
>>
>> Not sure if this is actually possible?
>>
>>> + sdhci_set_ios(mmc, ios);
>>> + return 0;
>>> + }
>>> +
>>> + if (ios->power_mode == MMC_POWER_UNDEFINED)
>>> + return 0;
>>> +
>>> + if (host->flags & SDHCI_DEVICE_DEAD) {
>>> + if (!IS_ERR(mmc->supply.vmmc) &&
>>> + ios->power_mode == MMC_POWER_OFF)
>>> + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
>>> + if (!IS_ERR_OR_NULL(mmc->supply.vmmc2) &&
>>> + ios->power_mode == MMC_POWER_OFF)
>>> + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc2, 0);
>>
>> This can be just:
>>
>> if (ios->power_mode == MMC_POWER_OFF) {
>> mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
>> mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc2, 0);
>> }
>>
>>> + return -1;
>>> + }
>>> +
>>> + host->timing = ios->timing;
>>
>> __sdhci_uhs2_set_ios() does this so it is not needed here.
>>
>>> +
>>> + sdhci_set_ios_common(mmc, ios);
>>> +
>>> + __sdhci_uhs2_set_ios(mmc, ios);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> /*****************************************************************************\
>>> * *
>>> * Driver init/exit *
>>> @@ -244,6 +339,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host)
>>> {
>>> host->mmc_host_ops.start_signal_voltage_switch =
>>> sdhci_uhs2_start_signal_voltage_switch;
>>> + host->mmc_host_ops.uhs2_set_ios = sdhci_uhs2_set_ios;
>>>
>>> return 0;
>>> }
>>> diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
>>> index a58ef19c08aa..184fee80253c 100644
>>> --- a/drivers/mmc/host/sdhci-uhs2.h
>>> +++ b/drivers/mmc/host/sdhci-uhs2.h
>>> @@ -178,5 +178,6 @@ void sdhci_uhs2_dump_regs(struct sdhci_host *host);
>>> bool sdhci_uhs2_mode(struct sdhci_host *host);
>>> void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask);
>>> void sdhci_uhs2_set_timeout(struct sdhci_host *host, struct mmc_command *cmd);
>>> +void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set);
>>>
>>> #endif /* __SDHCI_UHS2_H */
>>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
>>> index 99633a3ef549..49bbdc155b2b 100644
>>> --- a/drivers/mmc/host/sdhci.c
>>> +++ b/drivers/mmc/host/sdhci.c
>>> @@ -47,8 +47,6 @@
>>> static unsigned int debug_quirks = 0;
>>> static unsigned int debug_quirks2;
>>>
>>> -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
>>> -
>>> static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd);
>>>
>>> void sdhci_dumpregs(struct sdhci_host *host)
>>> @@ -1877,6 +1875,9 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host)
>>> case MMC_TIMING_MMC_HS400:
>>> preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400);
>>> break;
>>> + case MMC_TIMING_SD_UHS2:
>>> + preset = sdhci_readw(host, SDHCI_PRESET_FOR_UHS2);
>>> + break;
>>> default:
>>> pr_warn("%s: Invalid UHS-I mode selected\n",
>>> mmc_hostname(host->mmc));
>>> @@ -2325,24 +2326,9 @@ static bool sdhci_presetable_values_change(struct sdhci_host *host, struct mmc_i
>>> (sdhci_preset_needed(host, ios->timing) || host->drv_type != ios->drv_type);
>>> }
>>>
>>> -void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>>> +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios)
>>> {
>>> struct sdhci_host *host = mmc_priv(mmc);
>>> - bool reinit_uhs = host->reinit_uhs;
>>> - bool turning_on_clk = false;
>>> - u8 ctrl;
>>> -
>>> - host->reinit_uhs = false;
>>> -
>>> - if (ios->power_mode == MMC_POWER_UNDEFINED)
>>> - return;
>>> -
>>> - if (host->flags & SDHCI_DEVICE_DEAD) {
>>> - if (!IS_ERR(mmc->supply.vmmc) &&
>>> - ios->power_mode == MMC_POWER_OFF)
>>> - mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
>>> - return;
>>> - }
>>>
>>> /*
>>> * Reset the chip on each power off.
>>> @@ -2359,8 +2345,6 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>>> sdhci_enable_preset_value(host, false);
>>>
>>> if (!ios->clock || ios->clock != host->clock) {
>>> - turning_on_clk = ios->clock && !host->clock;
>>> -
>>> host->ops->set_clock(host, ios->clock);
>>> host->clock = ios->clock;
>>>
>>> @@ -2381,6 +2365,32 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>>> host->ops->set_power(host, ios->power_mode, ios->vdd);
>>> else
>>> sdhci_set_power(host, ios->power_mode, ios->vdd);
>>> +}
>>> +EXPORT_SYMBOL_GPL(sdhci_set_ios_common);
>>> +
>>> +void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
>>> +{
>>> + struct sdhci_host *host = mmc_priv(mmc);
>>> + bool reinit_uhs = host->reinit_uhs;
>>> + bool turning_on_clk = false;
>>> + u8 ctrl;
>>> +
>>> + host->reinit_uhs = false;
>>> +
>>> + if (ios->power_mode == MMC_POWER_UNDEFINED)
>>> + return;
>>> +
>>> + if (host->flags & SDHCI_DEVICE_DEAD) {
>>> + if (!IS_ERR(mmc->supply.vmmc) &&
>>> + ios->power_mode == MMC_POWER_OFF)
>>> + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
>>> + return;
>>> + }
>>> +
>>> + sdhci_set_ios_common(mmc, ios);
>>> +
>>> + if (!ios->clock || ios->clock != host->clock)
>>> + turning_on_clk = ios->clock && !host->clock;
>>>
>>> if (host->ops->platform_send_init_74_clocks)
>>> host->ops->platform_send_init_74_clocks(host, ios->power_mode);
>>> @@ -2959,7 +2969,7 @@ int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
>>> }
>>> EXPORT_SYMBOL_GPL(sdhci_execute_tuning);
>>>
>>> -static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
>>> +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
>>> {
>>> /* Host Controller v3.00 defines preset value registers */
>>> if (host->version < SDHCI_SPEC_300)
>>> @@ -2987,6 +2997,7 @@ static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
>>> host->preset_enabled = enable;
>>> }
>>> }
>>> +EXPORT_SYMBOL_GPL(sdhci_enable_preset_value);
>>>
>>> static void sdhci_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
>>> int err)
>>> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
>>> index df7fa0c0ebf8..c2f989dc2361 100644
>>> --- a/drivers/mmc/host/sdhci.h
>>> +++ b/drivers/mmc/host/sdhci.h
>>> @@ -850,6 +850,8 @@ void sdhci_set_bus_width(struct sdhci_host *host, int width);
>>> void sdhci_reset(struct sdhci_host *host, u8 mask);
>>> void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
>>> int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
>>> +void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
>>> +void sdhci_set_ios_common(struct mmc_host *mmc, struct mmc_ios *ios);
>>> void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
>>> int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
>>> struct mmc_ios *ios);
>>
>
> Thanks, Victor Shih

\
 
 \ /
  Last update: 2023-03-27 00:01    [W:0.087 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site