lkml.org 
[lkml]   [2023]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] regmap: apply reg_base and reg_downshift for single register ops
Hi Colin,

On Sat, Jan 28, 2023 at 12:06:20PM -0800, Colin Foster wrote:
> Hi Daniel,
>
> On Sat, Jan 28, 2023 at 03:10:01AM +0000, Daniel Golle wrote:
> > reg_base and reg_downshift currently don't have any effect if used with
> > simple single register operations.
> >
> > Fix that by taking them into account also for _reg_read, _reg_write and
> > _reg_update_bits (they may still be missing also in other place, eg.
> > page selection code).
> >
> > Fixes: 0074f3f2b1e43d ("regmap: allow a defined reg_base to be added to every address")
> > Fixes: 86fc59ef818beb ("regmap: add configurable downshift for addresses")
> > Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> > ---
> > drivers/base/regmap/regmap.c | 6 ++++++
> > 1 file changed, 6 insertions(+)
> >
> > diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
> > index d12d669157f24..7b8386ec21b8c 100644
> > --- a/drivers/base/regmap/regmap.c
> > +++ b/drivers/base/regmap/regmap.c
> > @@ -1986,6 +1986,8 @@ int _regmap_write(struct regmap *map, unsigned int reg,
> > }
> > }
> >
> > + reg += map->reg_base;
> > + reg >>= map->format.reg_downshift;
> > ret = map->reg_write(context, reg, val);
> > if (ret == 0) {
> > if (regmap_should_log(map))
> > @@ -2879,6 +2881,8 @@ static int _regmap_read(struct regmap *map, unsigned int reg,
> > if (!regmap_readable(map, reg))
> > return -EIO;
> >
> > + reg += map->reg_base;
> > + reg >>= map->format.reg_downshift;
>
> Something more subtle is going on.
>
> Here's a stack dump from a write and a read:
>
> [ 3.238249] dump_backtrace from show_stack+0x20/0x24
> [ 3.243349] r7:c3a27c00 r6:00000000 r5:c17aa2d8 r4:60000113
> [ 3.249034] show_stack from dump_stack_lvl+0x60/0x78
> [ 3.254121] dump_stack_lvl from dump_stack+0x18/0x1c
> [ 3.259208] r7:c3a27c00 r6:c3a5a400 r5:00000007 r4:c1e64d5c
> [ 3.264892] dump_stack from ocelot_spi_regmap_bus_write+0x9c/0xa8
> [ 3.271113] ocelot_spi_regmap_bus_write from _regmap_raw_write_impl+0x60c/0x8b8
> [ 3.278555] r7:00000000 r6:c3a5a403 r5:c1dfe160 r4:c3a1ba00
> [ 3.284239] _regmap_raw_write_impl from _regmap_bus_raw_write+0x7c/0xa0
> [ 3.290982] r10:df9bd164 r9:df9bd164 r8:c3a1ba00 r7:00000000 r6:00000000 r5:00000000
> [ 3.298847] r4:c3a1ba00
> [ 3.301391] _regmap_bus_raw_write from _regmap_write+0x64/0x174
> [ 3.307448] r6:00000000 r5:00000000 r4:c3a1ba00
> [ 3.312085] _regmap_write from regmap_write+0x4c/0x6c
> [ 3.317263] r9:df9bd164 r8:c1d9e1e0 r7:00000000 r6:00000000 r5:00000000 r4:c3a1ba00
> [ 3.325040] regmap_write from ocelot_spi_initialize+0x44/0xc0
> [ 3.330910] r7:00000000 r6:c1da1904 r5:c3a58d40 r4:c3a58d40
> [ 3.336595] ocelot_spi_initialize from ocelot_spi_probe+0x9c/0x178
>
>
> [ 3.753685] dump_backtrace from show_stack+0x20/0x24
> [ 3.758777] r7:00000004 r6:00000000 r5:c17aa2d8 r4:60000113
> [ 3.764462] show_stack from dump_stack_lvl+0x60/0x78
> [ 3.769547] dump_stack_lvl from dump_stack+0x18/0x1c
> [ 3.774633] r7:00000004 r6:c3a5a403 r5:c1e64d5c r4:c3a27c00
> [ 3.780317] dump_stack from ocelot_spi_regmap_bus_read+0x144/0x150
> [ 3.786623] ocelot_spi_regmap_bus_read from _regmap_raw_read+0x114/0x2d4
> [ 3.793455] r9:df9bd164 r8:c1dfe160 r7:c3a5a403 r6:00000004 r5:c3a1ba00 r4:c0a84140
> [ 3.801232] _regmap_raw_read from _regmap_bus_read+0x54/0x80
> [ 3.807016] r10:df9bd164 r9:df9bd164 r8:c1d9e1e0 r7:e0055ab8 r6:c3a5a403 r5:00000004
> [ 3.814881] r4:c3a1ba00
> [ 3.817425] _regmap_bus_read from _regmap_read+0x70/0x190
> [ 3.822952] r7:e0055ab8 r6:c3a1ba00 r5:00000004 r4:c3a1ba00
> [ 3.828635] _regmap_read from regmap_read+0x4c/0x6c
> [ 3.833642] r10:df9bd164 r9:df9bd164 r8:c1d9e1e0 r7:00000000 r6:e0055ab8 r5:00000004
> [ 3.841508] r4:c3a1ba00 r3:c21fc700
> [ 3.845098] regmap_read from ocelot_spi_initialize+0xa0/0xc0
> [ 3.850886] r7:00000000 r6:c1da1904 r5:c3a58d40 r4:00000001
> [ 3.856570] ocelot_spi_initialize from ocelot_spi_probe+0x9c/0x178
>
>
> So applying this in both _regmap_write and _regmap_raw_write_impl cause
> the operations to happen twice. Similarly with _regmap_read and
> _regmap_raw_read.

Ok, so I'll need another way to address this. Will dig more ;)

> Rewinding my brain back a year - I also didn't want to tamper with the
> reg value before any cache checks. Those operations are at the very end
> of the processing chain. In my scenario, I'm getting a 4-byte register
> at address 0x4. The fact that it needs to go out a SPI bus as 0x1
> shouldn't change any other logic in the system.
>
> And my other _main_ motivation was to use bus reads, so that bulk
> transfers were possible. My initial implementations didn't use the bus
> interface, so I did all address manipulation in my custom read / write
> functions. Bulk transfers offered an order of magnitude improvement in
> access time.

I'm using a regmap_bus with only reg_read and reg_write functions, in
this case the value of reg_base is currently not taken into account.

> Perhaps there is some confusion due to my field description in
> include/linux/regmap.h, and it should reference "any bus operation"? Or
> something similar...

I suppose so, as that's where my expectation regarding reg_base also
being applied on regmap_read operations on e.g. regmap-mdio stem
from. I also expected reg_base base to affect the 'registers' file in
debugfs (ie. offset being applied there as well).

To get an idea what I was doing while encountering this problem, see
the top 4 commits here:

https://github.com/dangowrt/linux/commits/wip

\
 
 \ /
  Last update: 2023-03-27 00:00    [W:0.060 / U:0.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site