lkml.org 
[lkml]   [2023]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] cc2520: move to gpio descriptors
From
Hello Arnd.

Thanks for doing this maintenance and API update work on the driver!

I think it is fair to assume there has been no use of the static
platform_data. I think this sneaked into all of the drivers and has been
copied around.

Varka, are you still around as s driver maintainer to test this change?
If not I will go and apply this patch in a few days as is. From a review
perspective it looks good.

regards
Stefan Schmidt


On 26.01.23 17:15, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> cc2520 supports both probing from static platform_data and
> from devicetree, but there have never been any definitions
> of the platform data in the mainline kernel, so it's safe
> to assume that only the DT path is used.
>
> After folding cc2520_platform_data into the driver itself,
> the GPIO handling can be simplified by moving to the modern
> gpiod interface.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
> MAINTAINERS | 1 -
> drivers/net/ieee802154/cc2520.c | 136 +++++++++-----------------------
> include/linux/spi/cc2520.h | 21 -----
> 3 files changed, 37 insertions(+), 121 deletions(-)
> delete mode 100644 include/linux/spi/cc2520.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index acda33cbd689..a36ead3ce7a3 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4650,7 +4650,6 @@ L: linux-wpan@vger.kernel.org
> S: Maintained
> F: Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
> F: drivers/net/ieee802154/cc2520.c
> -F: include/linux/spi/cc2520.h
>
> CCREE ARM TRUSTZONE CRYPTOCELL REE DRIVER
> M: Gilad Ben-Yossef <gilad@benyossef.com>
> diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c
> index edc769daad07..a94d8dd71aad 100644
> --- a/drivers/net/ieee802154/cc2520.c
> +++ b/drivers/net/ieee802154/cc2520.c
> @@ -7,14 +7,13 @@
> */
> #include <linux/kernel.h>
> #include <linux/module.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/delay.h>
> #include <linux/spi/spi.h>
> -#include <linux/spi/cc2520.h>
> +#include <linux/property.h>
> #include <linux/workqueue.h>
> #include <linux/interrupt.h>
> #include <linux/skbuff.h>
> -#include <linux/of_gpio.h>
> #include <linux/ieee802154.h>
> #include <linux/crc-ccitt.h>
> #include <asm/unaligned.h>
> @@ -206,7 +205,7 @@ struct cc2520_private {
> struct mutex buffer_mutex; /* SPI buffer mutex */
> bool is_tx; /* Flag for sync b/w Tx and Rx */
> bool amplified; /* Flag for CC2591 */
> - int fifo_pin; /* FIFO GPIO pin number */
> + struct gpio_desc *fifo_pin; /* FIFO GPIO pin number */
> struct work_struct fifop_irqwork;/* Workqueue for FIFOP */
> spinlock_t lock; /* Lock for is_tx*/
> struct completion tx_complete; /* Work completion for Tx */
> @@ -875,7 +874,7 @@ static void cc2520_fifop_irqwork(struct work_struct *work)
>
> dev_dbg(&priv->spi->dev, "fifop interrupt received\n");
>
> - if (gpio_get_value(priv->fifo_pin))
> + if (gpiod_get_value(priv->fifo_pin))
> cc2520_rx(priv);
> else
> dev_dbg(&priv->spi->dev, "rxfifo overflow\n");
> @@ -912,49 +911,11 @@ static irqreturn_t cc2520_sfd_isr(int irq, void *data)
> return IRQ_HANDLED;
> }
>
> -static int cc2520_get_platform_data(struct spi_device *spi,
> - struct cc2520_platform_data *pdata)
> -{
> - struct device_node *np = spi->dev.of_node;
> - struct cc2520_private *priv = spi_get_drvdata(spi);
> -
> - if (!np) {
> - struct cc2520_platform_data *spi_pdata = spi->dev.platform_data;
> -
> - if (!spi_pdata)
> - return -ENOENT;
> - *pdata = *spi_pdata;
> - priv->fifo_pin = pdata->fifo;
> - return 0;
> - }
> -
> - pdata->fifo = of_get_named_gpio(np, "fifo-gpio", 0);
> - priv->fifo_pin = pdata->fifo;
> -
> - pdata->fifop = of_get_named_gpio(np, "fifop-gpio", 0);
> -
> - pdata->sfd = of_get_named_gpio(np, "sfd-gpio", 0);
> - pdata->cca = of_get_named_gpio(np, "cca-gpio", 0);
> - pdata->vreg = of_get_named_gpio(np, "vreg-gpio", 0);
> - pdata->reset = of_get_named_gpio(np, "reset-gpio", 0);
> -
> - /* CC2591 front end for CC2520 */
> - if (of_property_read_bool(np, "amplified"))
> - priv->amplified = true;
> -
> - return 0;
> -}
> -
> static int cc2520_hw_init(struct cc2520_private *priv)
> {
> u8 status = 0, state = 0xff;
> int ret;
> int timeout = 100;
> - struct cc2520_platform_data pdata;
> -
> - ret = cc2520_get_platform_data(priv->spi, &pdata);
> - if (ret)
> - goto err_ret;
>
> ret = cc2520_read_register(priv, CC2520_FSMSTAT1, &state);
> if (ret)
> @@ -1071,7 +1032,11 @@ static int cc2520_hw_init(struct cc2520_private *priv)
> static int cc2520_probe(struct spi_device *spi)
> {
> struct cc2520_private *priv;
> - struct cc2520_platform_data pdata;
> + struct gpio_desc *fifop;
> + struct gpio_desc *cca;
> + struct gpio_desc *sfd;
> + struct gpio_desc *reset;
> + struct gpio_desc *vreg;
> int ret;
>
> priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
> @@ -1080,11 +1045,11 @@ static int cc2520_probe(struct spi_device *spi)
>
> spi_set_drvdata(spi, priv);
>
> - ret = cc2520_get_platform_data(spi, &pdata);
> - if (ret < 0) {
> - dev_err(&spi->dev, "no platform data\n");
> - return -EINVAL;
> - }
> + /* CC2591 front end for CC2520 */
> + /* Assumption that CC2591 is not connected */
> + priv->amplified = false;
> + if (device_property_read_bool(&spi->dev, "amplified"))
> + priv->amplified = true;
>
> priv->spi = spi;
>
> @@ -1098,80 +1063,53 @@ static int cc2520_probe(struct spi_device *spi)
> spin_lock_init(&priv->lock);
> init_completion(&priv->tx_complete);
>
> - /* Assumption that CC2591 is not connected */
> - priv->amplified = false;
> -
> /* Request all the gpio's */
> - if (!gpio_is_valid(pdata.fifo)) {
> + priv->fifo_pin = devm_gpiod_get(&spi->dev, "fifo", GPIOD_IN);
> + if (IS_ERR(priv->fifo_pin)) {
> dev_err(&spi->dev, "fifo gpio is not valid\n");
> - ret = -EINVAL;
> + ret = PTR_ERR(priv->fifo_pin);
> goto err_hw_init;
> }
>
> - ret = devm_gpio_request_one(&spi->dev, pdata.fifo,
> - GPIOF_IN, "fifo");
> - if (ret)
> - goto err_hw_init;
> -
> - if (!gpio_is_valid(pdata.cca)) {
> + cca = devm_gpiod_get(&spi->dev, "cca", GPIOD_IN);
> + if (IS_ERR(cca)) {
> dev_err(&spi->dev, "cca gpio is not valid\n");
> - ret = -EINVAL;
> + ret = PTR_ERR(cca);
> goto err_hw_init;
> }
>
> - ret = devm_gpio_request_one(&spi->dev, pdata.cca,
> - GPIOF_IN, "cca");
> - if (ret)
> - goto err_hw_init;
> -
> - if (!gpio_is_valid(pdata.fifop)) {
> + fifop = devm_gpiod_get(&spi->dev, "fifop", GPIOD_IN);
> + if (IS_ERR(fifop)) {
> dev_err(&spi->dev, "fifop gpio is not valid\n");
> - ret = -EINVAL;
> + ret = PTR_ERR(fifop);
> goto err_hw_init;
> }
>
> - ret = devm_gpio_request_one(&spi->dev, pdata.fifop,
> - GPIOF_IN, "fifop");
> - if (ret)
> - goto err_hw_init;
> -
> - if (!gpio_is_valid(pdata.sfd)) {
> + sfd = devm_gpiod_get(&spi->dev, "sfd", GPIOD_IN);
> + if (IS_ERR(sfd)) {
> dev_err(&spi->dev, "sfd gpio is not valid\n");
> - ret = -EINVAL;
> + ret = PTR_ERR(sfd);
> goto err_hw_init;
> }
>
> - ret = devm_gpio_request_one(&spi->dev, pdata.sfd,
> - GPIOF_IN, "sfd");
> - if (ret)
> - goto err_hw_init;
> -
> - if (!gpio_is_valid(pdata.reset)) {
> + reset = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(reset)) {
> dev_err(&spi->dev, "reset gpio is not valid\n");
> - ret = -EINVAL;
> + ret = PTR_ERR(reset);
> goto err_hw_init;
> }
>
> - ret = devm_gpio_request_one(&spi->dev, pdata.reset,
> - GPIOF_OUT_INIT_LOW, "reset");
> - if (ret)
> - goto err_hw_init;
> -
> - if (!gpio_is_valid(pdata.vreg)) {
> + vreg = devm_gpiod_get(&spi->dev, "vreg", GPIOD_OUT_LOW);
> + if (IS_ERR(vreg)) {
> dev_err(&spi->dev, "vreg gpio is not valid\n");
> - ret = -EINVAL;
> + ret = PTR_ERR(vreg);
> goto err_hw_init;
> }
>
> - ret = devm_gpio_request_one(&spi->dev, pdata.vreg,
> - GPIOF_OUT_INIT_LOW, "vreg");
> - if (ret)
> - goto err_hw_init;
> -
> - gpio_set_value(pdata.vreg, HIGH);
> + gpiod_set_value(vreg, HIGH);
> usleep_range(100, 150);
>
> - gpio_set_value(pdata.reset, HIGH);
> + gpiod_set_value(reset, HIGH);
> usleep_range(200, 250);
>
> ret = cc2520_hw_init(priv);
> @@ -1180,7 +1118,7 @@ static int cc2520_probe(struct spi_device *spi)
>
> /* Set up fifop interrupt */
> ret = devm_request_irq(&spi->dev,
> - gpio_to_irq(pdata.fifop),
> + gpiod_to_irq(fifop),
> cc2520_fifop_isr,
> IRQF_TRIGGER_RISING,
> dev_name(&spi->dev),
> @@ -1192,7 +1130,7 @@ static int cc2520_probe(struct spi_device *spi)
>
> /* Set up sfd interrupt */
> ret = devm_request_irq(&spi->dev,
> - gpio_to_irq(pdata.sfd),
> + gpiod_to_irq(sfd),
> cc2520_sfd_isr,
> IRQF_TRIGGER_FALLING,
> dev_name(&spi->dev),
> @@ -1241,7 +1179,7 @@ MODULE_DEVICE_TABLE(of, cc2520_of_ids);
> static struct spi_driver cc2520_driver = {
> .driver = {
> .name = "cc2520",
> - .of_match_table = of_match_ptr(cc2520_of_ids),
> + .of_match_table = cc2520_of_ids,
> },
> .id_table = cc2520_ids,
> .probe = cc2520_probe,
> diff --git a/include/linux/spi/cc2520.h b/include/linux/spi/cc2520.h
> deleted file mode 100644
> index 449bacf10700..000000000000
> --- a/include/linux/spi/cc2520.h
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-or-later */
> -/* Header file for cc2520 radio driver
> - *
> - * Copyright (C) 2014 Varka Bhadram <varkab@cdac.in>
> - * Md.Jamal Mohiuddin <mjmohiuddin@cdac.in>
> - * P Sowjanya <sowjanyap@cdac.in>
> - */
> -
> -#ifndef __CC2520_H
> -#define __CC2520_H
> -
> -struct cc2520_platform_data {
> - int fifo;
> - int fifop;
> - int cca;
> - int sfd;
> - int reset;
> - int vreg;
> -};
> -
> -#endif

\
 
 \ /
  Last update: 2023-03-27 00:00    [W:0.538 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site