lkml.org 
[lkml]   [2023]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V6 2/3] clk: meson: S4: add support for Amlogic S4 SoC PLL clock driver
From


On 2023/1/20 17:43, Jerome Brunet wrote:
> [ EXTERNAL EMAIL ]
>
>
> On Fri 20 Jan 2023 at 10:58, Yu Tu <yu.tu@amlogic.com> wrote:
>
>> Hi Jerome,
>>
>> On 2023/1/19 19:20, Jerome Brunet wrote:
>>> [ EXTERNAL EMAIL ]
>>> On Mon 16 Jan 2023 at 15:42, Yu Tu <yu.tu@amlogic.com> wrote:
>>>
>>>> Add the S4 PLL clock controller driver in the s4 SoC family.
>>>>
>>>> Signed-off-by: Yu Tu <yu.tu@amlogic.com>
>>>> ---
>>> [...]
>>>
>>>> +
>>>> +static struct clk_regmap s4_fclk_div2 = {
>>>> + .data = &(struct clk_regmap_gate_data){
>>>> + .offset = ANACTRL_FIXPLL_CTRL1,
>>>> + .bit_idx = 24,
>>>> + },
>>>> + .hw.init = &(struct clk_init_data){
>>>> + .name = "fclk_div2",
>>>> + .ops = &clk_regmap_gate_ro_ops,
>>> On the previous SoC, these fixed divider gate were not read-only.
>>> They are marked as critical when necessary, with the appropriate
>>> comment.
>>> Why is it different on the s4 ?
>>
>> In fact, this part of the SOC is no different from the previous G12a/b and
>> so on.
>>
>> I remember that my first version was made according to G12A, and I changed
>> this way under your suggestion.
>>
>> Maybe you were busy and forgot. For me, this mode and the previous g12a
>> mode function is ok. I can do either. So now how do you decide to go that
>> way?
>
> No I did not forgot.
> I told you that cannot put CRITICAL (or IGNORE_USED) without explaining
> why. I stand by this. Same goes for RO ops.
>

I will add an explanation.

>>
>>>
>>>> + .parent_hws = (const struct clk_hw *[]) {
>>>> + &s4_fclk_div2_div.hw
>>>> + },
>>>> + .num_parents = 1,
>>>> + },
>>>> +};
>>>> +
>>> [...]
>>>
>>>> +#ifndef __MESON_S4_PLL_H__
>>>> +#define __MESON_S4_PLL_H__
>>>> +
>>>> +/* ANA_CTRL - Registers
>>>> + * REG_BASE: REGISTER_BASE_ADDR = 0xfe008000
>>> This multi-line comment style is wrong in clk/
>>> REG_BASE is not used so I'm not sure this is useful
>>
>> I will remove REG_BASE and change this format in next version.
>>
>>>
>>>> + */
>>>> +#define ANACTRL_FIXPLL_CTRL0 0x040
>>>> +#define ANACTRL_FIXPLL_CTRL1 0x044
>>>> +#define ANACTRL_FIXPLL_CTRL2 0x048
>>>> +#define ANACTRL_FIXPLL_CTRL3 0x04c
>>>> +#define ANACTRL_FIXPLL_CTRL4 0x050
>>>> +#define ANACTRL_FIXPLL_CTRL5 0x054
>>>> +#define ANACTRL_FIXPLL_CTRL6 0x058
>>>> +#define ANACTRL_FIXPLL_STS 0x05c
>>>> +#define ANACTRL_GP0PLL_CTRL0 0x080
>>>> +#define ANACTRL_GP0PLL_CTRL1 0x084
>>>> +#define ANACTRL_GP0PLL_CTRL2 0x088
>>>> +#define ANACTRL_GP0PLL_CTRL3 0x08c
>>>> +#define ANACTRL_GP0PLL_CTRL4 0x090
>>>> +#define ANACTRL_GP0PLL_CTRL5 0x094
>>>> +#define ANACTRL_GP0PLL_CTRL6 0x098
>>>> +#define ANACTRL_GP0PLL_STS 0x09c
>>>> +#define ANACTRL_HIFIPLL_CTRL0 0x100
>>>> +#define ANACTRL_HIFIPLL_CTRL1 0x104
>>>> +#define ANACTRL_HIFIPLL_CTRL2 0x108
>>>> +#define ANACTRL_HIFIPLL_CTRL3 0x10c
>>>> +#define ANACTRL_HIFIPLL_CTRL4 0x110
>>>> +#define ANACTRL_HIFIPLL_CTRL5 0x114
>>>> +#define ANACTRL_HIFIPLL_CTRL6 0x118
>>>> +#define ANACTRL_HIFIPLL_STS 0x11c
>>>> +#define ANACTRL_MPLL_CTRL0 0x180
>>>> +#define ANACTRL_MPLL_CTRL1 0x184
>>>> +#define ANACTRL_MPLL_CTRL2 0x188
>>>> +#define ANACTRL_MPLL_CTRL3 0x18c
>>>> +#define ANACTRL_MPLL_CTRL4 0x190
>>>> +#define ANACTRL_MPLL_CTRL5 0x194
>>>> +#define ANACTRL_MPLL_CTRL6 0x198
>>>> +#define ANACTRL_MPLL_CTRL7 0x19c
>>>> +#define ANACTRL_MPLL_CTRL8 0x1a0
>>>> +#define ANACTRL_MPLL_STS 0x1a4
>>>> +#define ANACTRL_HDMIPLL_CTRL0 0x1c0
>>>> +#define ANACTRL_HDMIPLL_CTRL1 0x1c4
>>>> +#define ANACTRL_HDMIPLL_CTRL2 0x1c8
>>>> +#define ANACTRL_HDMIPLL_CTRL3 0x1cc
>>>> +#define ANACTRL_HDMIPLL_CTRL4 0x1d0
>>>> +#define ANACTRL_HDMIPLL_CTRL5 0x1d4
>>>> +#define ANACTRL_HDMIPLL_CTRL6 0x1d8
>>>> +#define ANACTRL_HDMIPLL_STS 0x1dc
>>>> +#define ANACTRL_HDMIPLL_VLOCK 0x1e4
>>>> +
>>>> +/*
>>>> + * CLKID index values
>>>> + *
>>>> + * These indices are entirely contrived and do not map onto the hardware.
>>>> + * It has now been decided to expose everything by default in the DT header:
>>>> + * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
>>>> + * to expose, such as the internal muxes and dividers of composite clocks,
>>>> + * will remain defined here.
>>>> + */
>>>> +#define CLKID_FIXED_PLL_DCO 0
>>>> +#define CLKID_FCLK_DIV2_DIV 2
>>>> +#define CLKID_FCLK_DIV3_DIV 4
>>>> +#define CLKID_FCLK_DIV4_DIV 6
>>>> +#define CLKID_FCLK_DIV5_DIV 8
>>>> +#define CLKID_FCLK_DIV7_DIV 10
>>>> +#define CLKID_FCLK_DIV2P5_DIV 12
>>>> +#define CLKID_GP0_PLL_DCO 14
>>>> +#define CLKID_HIFI_PLL_DCO 16
>>>> +#define CLKID_HDMI_PLL_DCO 18
>>>> +#define CLKID_HDMI_PLL_OD 19
>>>> +#define CLKID_MPLL_50M_DIV 21
>>>> +#define CLKID_MPLL_PREDIV 23
>>>> +#define CLKID_MPLL0_DIV 24
>>>> +#define CLKID_MPLL1_DIV 26
>>>> +#define CLKID_MPLL2_DIV 28
>>>> +#define CLKID_MPLL3_DIV 30
>>>> +
>>>> +#define NR_PLL_CLKS 32
>>>> +/* include the CLKIDs that have been made part of the DT binding */
>>>> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h>
>>>> +
>>>> +#endif /* __MESON_S4_PLL_H__ */
>>>
>

\
 
 \ /
  Last update: 2023-03-27 00:00    [W:0.055 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site