lkml.org 
[lkml]   [2023]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFT PATCH v3 4/4] arm64: dts: exynos: add unit address to DWC3 node wrapper in Exynos7
Date
Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node
which do not have unit address. Therefore usethe address space
of child device (actual DWC3 Controller) as the wrapper's address to
fix:

exynos7-espresso.dtb: soc@0: usb: {'compatible': ['samsung,exynos7-dwusb3'], ...
should not be valid under {'type': 'object'}

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v1:
1. New patch
---
arch/arm64/boot/dts/exynos/exynos7.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 82fee1b7caab..b1fa68835b09 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -690,7 +690,7 @@ usbdrd_phy: phy@15500000 {
#phy-cells = <1>;
};

- usbdrd: usb {
+ usbdrd: usb@15400000 {
compatible = "samsung,exynos7-dwusb3";
clocks = <&clock_fsys0 ACLK_USBDRD300>,
<&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
@@ -699,11 +699,11 @@ usbdrd: usb {
"usbdrd30_axius_clk";
#address-cells = <1>;
#size-cells = <1>;
- ranges;
+ ranges = <0x0 0x15400000 0x10000>;

- usb@15400000 {
+ usb@0 {
compatible = "snps,dwc3";
- reg = <0x15400000 0x10000>;
+ reg = <0x0 0x10000>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
phy-names = "usb2-phy", "usb3-phy";
--
2.34.1
\
 
 \ /
  Last update: 2023-03-27 00:00    [W:0.408 / U:0.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site