lkml.org 
[lkml]   [2023]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 10/14] RISC-V: KVM: Disable all hpmcounter access for VS/VU mode
Date
Any guest must not get access to any hpmcounter including cycle/instret
without any checks. We achieve that by disabling all the bits except TM
bit in hcounteren.

However, instret and cycle access for guest user space can be enabled
upon explicit request (via ONE REG) or on first trap from VU mode
to maintain ABI requirement in the future. This patch doesn't support
that as ONE REG interface is not settled yet.

Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
---
arch/riscv/kvm/main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/kvm/main.c b/arch/riscv/kvm/main.c
index 58c5489..c5d400f 100644
--- a/arch/riscv/kvm/main.c
+++ b/arch/riscv/kvm/main.c
@@ -49,7 +49,8 @@ int kvm_arch_hardware_enable(void)
hideleg |= (1UL << IRQ_VS_EXT);
csr_write(CSR_HIDELEG, hideleg);

- csr_write(CSR_HCOUNTEREN, -1UL);
+ /* VS should access only the time counter directly. Everything else should trap */
+ csr_write(CSR_HCOUNTEREN, 0x02);

csr_write(CSR_HVIP, 0);

--
2.25.1
\
 
 \ /
  Last update: 2023-03-26 23:58    [W:0.369 / U:0.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site