lkml.org 
[lkml]   [2023]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 1/4] drm/vc4: hdmi: Replace hardcoded value by define
The 120MHz value hardcoded in the call to max_t to compute the HSM rate
is defined in the driver as HSM_MIN_CLOCK_FREQ, let's switch to it so
that it's more readable.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 14628864487a..98fa306dbd24 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1482,7 +1482,9 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,
* Additionally, the AXI clock needs to be at least 25% of
* pixel clock, but HSM ends up being the limiting factor.
*/
- hsm_rate = max_t(unsigned long, 120000000, (tmds_char_rate / 100) * 101);
+ hsm_rate = max_t(unsigned long,
+ HSM_MIN_CLOCK_FREQ,
+ (tmds_char_rate / 100) * 101);
ret = clk_set_min_rate(vc4_hdmi->hsm_clock, hsm_rate);
if (ret) {
DRM_ERROR("Failed to set HSM clock rate: %d\n", ret);
--
2.39.1

\
 
 \ /
  Last update: 2023-03-26 23:57    [W:0.061 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site