Messages in this thread | | | From | "Rafael J. Wysocki" <> | Date | Thu, 26 Jan 2023 17:26:15 +0100 | Subject | Re: [GIT PULL] thermal changes for v6.3-rc1 |
| |
On Thu, Jan 26, 2023 at 5:19 PM Daniel Lezcano <daniel.lezcano@linaro.org> wrote: > > Hi Rafael, > > please consider pulling: > > The following changes since commit 3a151494dc04c76add577ae66e8a04f900638aaf: > > thermal/drivers/armada: Use strscpy() to instead of strncpy() > (2023-01-06 14:14:48 +0100) > > are available in the Git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git > tags/thermal-v6.3-rc1 > > for you to fetch changes up to 8c5ee9155f8ae133070b40ee4be03cafb35c188d: > > thermal/drivers/armada: Use the thermal_zone_get_crit_temp() > (2023-01-24 12:37:56 +0100) > > ---------------------------------------------------------------- > - Fix kerneldoc format errors for Rockchip, Mediatek and Uniphier > (Randy Dunlap) > > - Add the missing 'qcom,adc-tm7' compatible string in the dt-bindings > (Krzysztof Kozlowski) > > - Improve the calibration routine by relying on the nvmem to read the > values and provide a set of fixes for the QCom tsens driver (Dmitry > Baryshkov) > > - Remove the duplicate interrupt setting routine in the QCom tsens > driver (Daniel Lezcano) > > - Fix a wrong loop condition in the i.MX SC thermal driver and add the > iMX8QM sensors (Viorel Suman) > > - Fix header inclusion asm-generic.h by asm.h for the > qcom-spmi-adc-tm5 driver (Andy Shevchenko) > > - Use the devm_platform_get_and_ioremap_resource() combo function in > all the drivers where the conversion applies (Ye Xingchen) > > - Replace a literal mask by an existing corresponding macro (Yangtao > Li) > > - Add support for MT7986 and MT7981 (Daniel Golle) > > - Use thermal_zone_get_crit_temp() for the Armada thermal driver > (Daniel Lezcano) > > ---------------------------------------------------------------- > Andy Shevchenko (1): > thermal/drivers/qcom-spmi-adc-tm5: Use asm intead of asm-generic > > Daniel Golle (2): > thermal/drivers/mtk: Use function pointer for raw_to_mcelsius > thermal/drivers/mtk: Add support for MT7986 and MT7981 > > Daniel Lezcano (2): > thermal/drivers/qcom: Remove duplicate set next trip point > interrupt code > thermal/drivers/armada: Use the thermal_zone_get_crit_temp() > > Dmitry Baryshkov (14): > dt-bindings: thermal: tsens: add msm8956 compat > dt-bindings: thermal: tsens: support per-sensor calibration cells > dt-bindings: thermal: tsens: add per-sensor cells for msm8974 > thermal/drivers/tsens: Drop unnecessary hw_ids > thermal/drivers/tsens: Drop msm8976-specific defines > thermal/drivers/tsens: Sort out msm8976 vs msm8956 data > thermal/drivers/tsens: fix slope values for msm8939 > thermal/drivers/tsens: limit num_sensors to 9 for msm8939 > thermal/drivers/tsens: Support using nvmem cells for calibration data > thermal/drivers/tsens: Support using nvmem cells for msm8974 > calibration > thermal/drivers/tsens: Rework legacy calibration data parsers > thermal/drivers/tsens: Drop single-cell code for mdm9607 > thermal/drivers/tsens: Drop single-cell code for msm8939 > thermal/drivers/tsens: Drop single-cell code for msm8976/msm8956 > > Krzysztof Kozlowski (1): > dt-bindings: thermal: qcom-spmi-adc-tm5: add qcom,adc-tm7 > > Rafael J. Wysocki (1): > Merge tag 'generic-trip-point' of > ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux > > Randy Dunlap (3): > thermal/drivers/mtk_thermal: Fix kernel-doc function name > thermal/drivers/rockchip: Fix kernel-doc warnings > thermal/drivers/uniphier: Use regular comment syntax > > Viorel Suman (2): > thermal/drivers/imx_sc_thermal: Fix the loop condition > thermal/drivers/imx_sc_thermal: Add iMX8QM sensors > > Yangtao Li (1): > thermal/drivers/sun8i: Convert to use macro > > ye xingchen (9): > thermal/drivers/brcmstb_thermal: Use > devm_platform_get_and_ioremap_resource() > thermal/drivers/bcm2835: Use devm_platform_get_and_ioremap_resource() > thermal/drivers/dove: Use devm_platform_get_and_ioremap_resource() > thermal/drivers/armada: Use devm_platform_get_and_ioremap_resource() > thermal/drivers/mtk_thermal: Use > devm_platform_get_and_ioremap_resource() > thermal/drivers/rockchip: Use > devm_platform_get_and_ioremap_resource() > thermal/drivers/thermal_mmio: Use > devm_platform_get_and_ioremap_resource() > thermal/drivers/kirkwood: Use > devm_platform_get_and_ioremap_resource() > thermal/drivers/spear: Use devm_platform_get_and_ioremap_resource() > > .../bindings/thermal/qcom-spmi-adc-tm5.yaml | 1 + > .../devicetree/bindings/thermal/qcom-tsens.yaml | 153 ++++- > drivers/thermal/armada_thermal.c | 42 +- > drivers/thermal/broadcom/bcm2835_thermal.c | 4 +- > drivers/thermal/broadcom/brcmstb_thermal.c | 4 +- > drivers/thermal/dove_thermal.c | 7 +- > drivers/thermal/imx_sc_thermal.c | 8 +- > drivers/thermal/kirkwood_thermal.c | 4 +- > drivers/thermal/mtk_thermal.c | 149 ++++- > drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 3 +- > drivers/thermal/qcom/tsens-v0_1.c | 655 > ++++++--------------- > drivers/thermal/qcom/tsens-v1.c | 340 +++-------- > drivers/thermal/qcom/tsens.c | 219 +++++-- > drivers/thermal/qcom/tsens.h | 46 +- > drivers/thermal/rockchip_thermal.c | 10 +- > drivers/thermal/spear_thermal.c | 4 +- > drivers/thermal/sun8i_thermal.c | 4 +- > drivers/thermal/thermal_mmio.c | 4 +- > drivers/thermal/uniphier_thermal.c | 2 +- > 19 files changed, 800 insertions(+), 859 deletions(-) > > --
Pulled pushed into the linux-next branch in linux-pm.git.
If all goes well, I'll merge it into thermal on Monday.
Thanks!
| |