lkml.org 
[lkml]   [2023]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 8/8] arm64: dts: qcom: sm8550-mtp: Add USB PHYs and HC nodes
Date
Enable USB HC and PHYs nodes on SM8550 MTP board.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---

Changes since v2:
* none

NOTE: This patch has been already merged. It is here only to provide
context for the rest of the patchset. There is a change with respect to the
clocks, but that will be sent as a separate/individual fix patch.

arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 31e039f10a1b..cea1f12ce294 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -455,6 +455,28 @@ &ufs_mem_phy {
status = "okay";
};

+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ vdd-supply = <&vreg_l1e_0p88>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3f_0p91>;
+
+ status = "okay";
+};
+
&xo_board {
clock-frequency = <76800000>;
};
--
2.34.1
\
 
 \ /
  Last update: 2023-03-26 23:56    [W:0.094 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site