lkml.org 
[lkml]   [2023]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] gpiolib-acpi: Don't set GPIOs for wakeup in S3 mode
On Mon, Jan 23, 2023 at 8:03 AM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
>
> On Sat, Jan 21, 2023 at 2:48 PM Mario Limonciello
> <mario.limonciello@amd.com> wrote:
> >
> > commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
> > adjusted the policy to enable wakeup by default if the ACPI tables
> > indicated that a device was wake capable.
> >
> > It was reported however that this broke suspend on at least two System76
> > systems in S3 mode and two Lenovo Gen2a systems, but only with S3.
> > When the machines are set to s2idle, wakeup behaves properly.
> >
> > Configuring the GPIOs for wakeup with S3 doesn't work properly, so only
> > set it when the system supports low power idle.
> >
> > Fixes: 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
> > Fixes: b38f2d5d9615c ("i2c: acpi: Use ACPI wake capability bit to set wake_irq")
> > Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2357
> > Link: https://bugzilla.redhat.com/show_bug.cgi?id=2162013
> > Reported-by: Nathan Smythe <ncsmythe@scruboak.org>
> > Tested-by: Nathan Smythe <ncsmythe@scruboak.org>
> > Suggested-by: Raul Rangel <rrangel@chromium.org>
> > Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
> > ---
> > drivers/gpio/gpiolib-acpi.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
> > index 9ef0f5641b521..17c53f484280f 100644
> > --- a/drivers/gpio/gpiolib-acpi.c
> > +++ b/drivers/gpio/gpiolib-acpi.c
> > @@ -1104,7 +1104,8 @@ int acpi_dev_gpio_irq_wake_get_by(struct acpi_device *adev, const char *name, in
> > dev_dbg(&adev->dev, "IRQ %d already in use\n", irq);
> > }
> >
> > - if (wake_capable)
> > + /* avoid suspend issues with GPIOs when systems are using S3 */
> > + if (wake_capable && acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0)
> > *wake_capable = info.wake_capable;
> >
> > return irq;
> > --
> > 2.34.1
> >
>
> Applied, thanks!
>
> Bart


We still need to figure out a proper fix for this. If you read my post
here: https://gitlab.freedesktop.org/drm/amd/-/issues/2357#note_1732372
I think we misinterpreted what the SharedAndWake bit is used for. To
me it sounds like it's only valid for HW Reduced ACPI platforms, and
S0ix. My changes made it so we call `dev_pm_set_wake_irq` when the
Wake bit is set. Does anyone have any additional context on the Wake
bit? I think we either need to make `dev_pm_set_wake_irq` (or a
variant) only enable the wake on S0i3, or we can teach the ACPI
subsystem to manage arming the IRQ's wake bit. Kind of like we already
manage the GPE events for the device.

\
 
 \ /
  Last update: 2023-03-26 23:52    [W:0.078 / U:1.992 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site