[lkml]   [2023]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v4 0/2] Add support for the AUO A030JTN01 TFT LCD
Changes since v3:
Reworked the few init registers that are used for hblk, vblk and standby
Use of dev_err_probe() instead of dev_err()
priv->panel_info = spi_get_device_match_data(spi);

restored spi node to dt-bindings that was missing in v3

Changes since v2:
- added macros for stanby mode (untested, please review @pcercuei)
- added SPI table_id
- changed description in the bindings to describe the hw more

Changes since v1:
- fixed the dt-bindings maintainer email adress
- dropped backlight, port, power-supply and reset-gpios as they're
provided by panel-common.yaml as pointed by Krzysztof Kozlowski
- changed reg: true to reg : maxItems: 1

Christophe Branchereau (1):
drm/panel: Add driver for the AUO A030JTN01 TFT LCD

Paul Cercueil (1):
dt-bindings: display/panel: Add AUO A030JTN01

.../bindings/display/panel/auo,a030jtn01.yaml | 60 ++++
drivers/gpu/drm/panel/Kconfig | 8 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-auo-a030jtn01.c | 308 ++++++++++++++++++
4 files changed, 377 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
create mode 100644 drivers/gpu/drm/panel/panel-auo-a030jtn01.c


 \ /
  Last update: 2023-03-26 23:51    [W:0.101 / U:2.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site