lkml.org 
[lkml]   [2023]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/6] arm64: dts: qcom: sc8280xp-x13s: disable soundcard
On Mon, Jan 02, 2023 at 04:46:40PM +0100, Krzysztof Kozlowski wrote:
> On 02/01/2023 16:39, Johan Hovold wrote:
> >>>>>>> wcd_tx: wcd9380-tx@0,3 {
> >>>>>>> compatible = "sdw20217010d00";
> >>>>>>> @@ -781,6 +787,8 @@ &vamacro {
> >>>>>>> pinctrl-names = "default";
> >>>>>>> vdd-micb-supply = <&vreg_s10b>;
> >>>>>>> qcom,dmic-sample-rate = <600000>;
> >>>>>>> +
> >>>>>>> + status = "disabled";
> >>>>>>
> >>>>>> That's a double disable.
> >>>>>
> >>>>> Yes, that's on purpose. We're temporarily disabling these nodes instead
> >>>>> of reverting the series which should not have been merged.
> >>>>
> >>>> I don't get why disabling something twice is anyhow related to
> >>>> "temporarily disable". One disable is enough for temporary or permanent
> >>>> disables.
> >>>
> >>> It clearly shows that this was done on purpose and indicates which
> >>> properties need to be changed to "okay" once we have actual support.
> >>
> >> No, it shows nothing clearly as from time to time we got duplicated
> >> properties and it's a simply mistake. The double disable without any
> >> comment looks like mistake, not intentional code.
> >
> > It's not a mistake. It's intentional. And I don't want to spend hours on
> > this because of someone else's cock-up.
>
> To you it looks intentional, but for the reader of DTS which has
> disabled node in DTSI and in DTS - so in two places - it looks like a
> pure bug. Just because you know the reason behind the change does not
> make the code readable.

Calling a (temporary) redundant property a 'pure bug' seems like a bit
of stretch, and it has nothing to do with readability.

> >>>>>
> >>>>> Once we have driver support, these properties will be updated again.
> >>>>
> >>>> Linux kernel is not the only consumer of DTS, thus having or not having
> >>>> the support in the kernel is not reason to disable pieces of it.
> >>>> Assuming the DTS is correct, of course, because maybe that's the problem?
> >>>
> >>> Okay, let's revert these sound dts changes then until we have support.
> >>> We have no idea if the dts changes are correct as sound still depends
> >>> on out-of-tree hacks.
> >>>
> >>> People are using -next for development and I don't want to see them
> >>> toast their speakers because we failed get the dependencies merged
> >>> before merging the dts changes which is how we normally do this.
> >>
> >> If the error is in DTS, yeah, revert or disable is a way. But if the
> >> issue is in the incomplete or broken Linux drivers, then these should be
> >> changed, e.g. intentionally fail probing, skip new devices, drop new
> >> compatible etc.
> >
> > And how long does it take for that to propagate and isn't the response
> > just going go to be "well then fix the driver".
> >
> > I think you're just being unreasonable here.
>
> I did not propose to fix the driver. I proposed to fail the driver's
> probe or remove the compatible from it.
>
> Such change propagate the same speed as DTS change.

But the DTS changes are in Bjorn branch and Bjorn and I discussed it and
decided to disable them temporarily instead of reverting.

Now you're asking me to figure out all the dependent driver and patch
them individually. And this may not reach next before the DTS changes
do.

> > If Bjorn could rebase his tree, he could simply drop these for now as
> > sound support was clearly not ready. Since that isn't the case we need
> > to at least try to be constructive and figure out a reasonable
> > alternative. While "Linux isn't the only consumer" is a true statement,
> > it really is not relevant just because there are some dts changes in
> > Bjorn's tree which should not be there.
>
> The SC8280XP audio DTS looks in general correct, except some style
> issues, redundant properties and never tested against DT bindings.
> Therefore it looks as accurate and more-or-less correct representation
> of the hardware, unless you have some more details on this.

Only that the drivers fail to probe in multiple ways, some which may
require updating the bindings to address. There's also an indication
that some further driver support is needed for proper speaker
protection. That really should be in place before we enable this.

Johan

\
 
 \ /
  Last update: 2023-03-26 23:25    [W:0.085 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site