lkml.org 
[lkml]   [2023]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 5/5] PM: domains: Do not call device_pm_check_callbacks() when holding genpd_lock()
From
On 17/01/2023 16:11, Ulf Hansson wrote:
> On Mon, 19 Dec 2022 at 16:15, Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org> wrote:
>>
>> If PM domain on PREEMPT_RT is marked as GENPD_FLAG_RT_SAFE(), the
>> genpd_lock() will be a raw spin lock, thus device_pm_check_callbacks()
>> must be called outside of the domain lock.
>>
>> This solves on PREEMPT_RT:
>>
>> [ BUG: Invalid wait context ]
>> 6.1.0-rt5-00325-g8a5f56bcfcca #8 Tainted: G W
>> -----------------------------
>> swapper/0/1 is trying to lock:
>> ffff76e045dec9a0 (&dev->power.lock){+.+.}-{3:3}, at: device_pm_check_callbacks+0x20/0xf0
>> other info that might help us debug this:
>> context-{5:5}
>> 3 locks held by swapper/0/1:
>> #0: ffff76e045deb8e8 (&dev->mutex){....}-{4:4}, at: __device_attach+0x38/0x1c0
>> #1: ffffa92b81f825e0 (gpd_list_lock){+.+.}-{4:4}, at: __genpd_dev_pm_attach+0x7c/0x250
>> #2: ffff76e04105c7a0 (&genpd->rslock){....}-{2:2}, at: genpd_lock_rawspin+0x1c/0x30
>> stack backtrace:
>> CPU: 5 PID: 1 Comm: swapper/0 Tainted: G W 6.1.0-rt5-00325-g8a5f56bcfcca #8
>> Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
>> Call trace:
>> dump_backtrace.part.0+0xe0/0xf0
>> show_stack+0x18/0x40
>> dump_stack_lvl+0x8c/0xb8
>> dump_stack+0x18/0x34
>> __lock_acquire+0x938/0x2100
>> lock_acquire.part.0+0x104/0x28c
>> lock_acquire+0x68/0x84
>> rt_spin_lock+0x40/0x100
>> device_pm_check_callbacks+0x20/0xf0
>> dev_pm_domain_set+0x54/0x64
>> genpd_add_device+0x258/0x340
>> __genpd_dev_pm_attach+0xa8/0x250
>> genpd_dev_pm_attach_by_id+0xc4/0x190
>> genpd_dev_pm_attach_by_name+0x3c/0x60
>> dev_pm_domain_attach_by_name+0x20/0x30
>> dt_idle_attach_cpu+0x24/0x90
>> psci_cpuidle_probe+0x300/0x4b0
>> platform_probe+0x68/0xe0
>> really_probe+0xbc/0x2dc
>> __driver_probe_device+0x78/0xe0
>> driver_probe_device+0x3c/0x160
>> __device_attach_driver+0xb8/0x140
>> bus_for_each_drv+0x78/0xd0
>> __device_attach+0xa8/0x1c0
>> device_initial_probe+0x14/0x20
>> bus_probe_device+0x9c/0xa4
>> device_add+0x3b4/0x8dc
>> platform_device_add+0x114/0x234
>> platform_device_register_full+0x108/0x1a4
>> psci_idle_init+0x6c/0xb0
>> do_one_initcall+0x74/0x450
>> kernel_init_freeable+0x2e0/0x350
>> kernel_init+0x24/0x130
>> ret_from_fork+0x10/0x20
>>
>> Cc: Adrien Thierry <athierry@redhat.com>
>> Cc: Brian Masney <bmasney@redhat.com>
>> Cc: linux-rt-users@vger.kernel.org
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>> drivers/base/power/domain.c | 6 +++++-
>> 1 file changed, 5 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
>> index 4dfce1d476f4..db499ba40497 100644
>> --- a/drivers/base/power/domain.c
>> +++ b/drivers/base/power/domain.c
>> @@ -1666,10 +1666,14 @@ static int genpd_add_device(struct generic_pm_domain *genpd, struct device *dev,
>> if (ret)
>> goto out;
>>
>> +
>> + /* PREEMPT_RT: Must be outside of genpd_lock */
>> + device_pm_check_callbacks(dev);
>> +
>> genpd_lock(genpd);
>>
>> genpd_set_cpumask(genpd, gpd_data->cpu);
>> - dev_pm_domain_set(dev, &genpd->domain);
>> + dev_pm_domain_set_no_cb(dev, &genpd->domain);
>>
>> genpd->device_count++;
>> if (gd)
>
> Rather than splitting up the assignment in two steps, I think it
> should be perfectly fine to move the call to dev_pm_domain_set()
> outside the genpd lock.
>
> Note that, genpd_add_device() is always being called with
> gpd_list_lock mutex being held. This prevents the genpd from being
> removed, while we use it here.

Hm, indeed, should be fine.

>
> Moreover, we need a similar change for the call to dev_pm_domain_set()
> in genpd_remove_device().

Right.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2023-03-26 23:47    [W:0.093 / U:1.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site