lkml.org 
[lkml]   [2023]   [Jan]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/2] arm64: dts: qcom: sm8550: Add PCIe HC and PHY support
On 23-01-19 13:29:38, Krzysztof Kozlowski wrote:
> On 19/01/2023 13:09, Abel Vesa wrote:
> > On 23-01-19 08:33:20, Johan Hovold wrote:
> >> On Wed, Jan 18, 2023 at 05:55:31PM -0600, Bjorn Andersson wrote:
> >>> On Thu, 19 Jan 2023 01:05:24 +0200, Abel Vesa wrote:
> >>>> This patchset adds PCIe controllers and PHYs support to SM8550 platform
> >>>> and enables them on the MTP board.
> >>>>
> >>>> The v1 was here:
> >>>> https://lore.kernel.org/all/20221116130430.2812173-1-abel.vesa@linaro.org/
> >>>>
> >>>> Changes since v1:
> >>>> * ordered pcie related nodes alphabetically in MTP dts
> >>>> * dropped the pipe_mux, phy_pipe and ref clocks from the pcie nodes
> >>>> * dropped the child node from the phy nodes, like Johan suggested,
> >>>> and updated to use the sc8280xp binding scheme
> >>>> * changed "pcie_1_nocsr_com_phy_reset" 2nd reset name of pcie1_phy
> >>>> to "nocsr"
> >>>> * reordered all pcie nodes properties to look similar to the ones
> >>>> from sc8280xp
> >>>>
> >>>> [...]
> >>>
> >>> Applied, thanks!
> >>>
> >>> [1/2] arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes
> >>> commit: 7d1158c984d37e79ab8bb55ab152a0b35566cb89
> >>> [2/2] arm64: dts: qcom: sm8550-mtp: Add PCIe PHYs and controllers nodes
> >>> commit: 1eeef306b5d80494cdb149f058013c3ab43984b4
> >>
> >> I believe there were still some changes needed to the controller
> >> and PHY bindings so this should not have been merged.
> >>
> >> https://lore.kernel.org/all/Y8fuUI4xaNkADkWl@hovoldconsulting.com/
> >> https://lore.kernel.org/lkml/Y8giHJMtPu4wTlmA@hovoldconsulting.com/
> >>
> >> Perhaps in the future you can send the dts changes along with the (PHY)
> >> driver changes so that they can be kept in lock-step and avoid this.
> >
> > Well, that is a bit hard to do, because phy patches are based on
> > linux-phy/next, while dtsi patches are based on Bjorn's tree which,
> > so ...
>
> ... which we long time solved by basing your patches on linux-next.
> That's the only way for inter-tree patchsets to be properly based.

Yeah, I just realized that out after I sent the reply :-)

Will send a single patchset which adds both the controller changes,
the phy changes and the dts/i changes (including all related bindings
updates).

>
> Best regards,
> Krzysztof
>

\
 
 \ /
  Last update: 2023-03-26 23:47    [W:0.050 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site