lkml.org 
[lkml]   [2023]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC v4 2/5] usb: dwc3: core: Refactor PHY logic to support Multiport Controller
From


On 1/19/2023 6:06 AM, Thinh Nguyen wrote:
> Hi,
>
> On Sun, Jan 15, 2023, Krishna Kurapati wrote:
>> Currently the DWC3 driver supports only single port controller
>> which requires at most one HS and one SS PHY.
>
> Add note here that multi-port is for host mode for clarity.
>
>>
>> But the DWC3 USB controller can be connected to multiple ports and
>> each port can have their own PHYs. Each port of the multiport
>> controller can either be HS+SS capable or HS only capable
>> Proper quantification of them is required to modify GUSB2PHYCFG
>> and GUSB3PIPECTL registers appropriately.
>>
>> Add support for detecting, obtaining and configuring phy's supported
>> by a multiport controller and limit the max number of ports
>> supported to 4.
>>
>> Signed-off-by: Harsh Agarwal <quic_harshq@quicinc.com>
>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
>> ---
>> drivers/usb/dwc3/core.c | 304 +++++++++++++++++++++++++++++-----------
>> drivers/usb/dwc3/core.h | 15 +-
>> drivers/usb/dwc3/drd.c | 14 +-
>> 3 files changed, 244 insertions(+), 89 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index 476b63618511..7e0a9a598dfd 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -120,7 +120,7 @@ static void __dwc3_set_mode(struct work_struct *work)
>> {
>> struct dwc3 *dwc = work_to_dwc(work);
>> unsigned long flags;
>> - int ret;
>> + int ret, i;
>
> Can we declare variables in separate lines here and other places.
>
>> u32 reg;
>> u32 desired_dr_role;
>>
>> @@ -200,8 +200,10 @@ static void __dwc3_set_mode(struct work_struct *work)
>> } else {
>> if (dwc->usb2_phy)
>> otg_set_vbus(dwc->usb2_phy->otg, true);
>> - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
>> - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
>> + phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
>> + }
>> if (dwc->dis_split_quirk) {
>> reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
>> reg |= DWC3_GUCTL3_SPLITDISABLE;
>> @@ -216,8 +218,8 @@ static void __dwc3_set_mode(struct work_struct *work)
>>
>> if (dwc->usb2_phy)
>> otg_set_vbus(dwc->usb2_phy->otg, false);
>> - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
>> - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
>> + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
>> + phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE);
>>
>> ret = dwc3_gadget_init(dwc);
>> if (ret)
>> @@ -659,22 +661,14 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc)
>> return ret;
>> }
>>
>> -/**
>> - * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
>> - * @dwc: Pointer to our controller context structure
>> - *
>> - * Returns 0 on success. The USB PHY interfaces are configured but not
>> - * initialized. The PHY interfaces and the PHYs get initialized together with
>> - * the core in dwc3_core_init.
>> - */
>> -static int dwc3_phy_setup(struct dwc3 *dwc)
>> +static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index)
>> {
>> unsigned int hw_mode;
>> u32 reg;
>>
>> hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
>>
>> - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
>> + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(index));
>>
>> /*
>> * Make sure UX_EXIT_PX is cleared as that causes issues with some
>> @@ -729,9 +723,19 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
>> if (dwc->dis_del_phy_power_chg_quirk)
>> reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
>>
>> - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
>> + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(index), reg);
>>
>> - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
>> + return 0;
>> +}
>> +
>> +static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index)
>> +{
>> + unsigned int hw_mode;
>> + u32 reg;
>> +
>> + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
>> +
>> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(index));
>>
>> /* Select the HS PHY interface */
>> switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
>> @@ -743,7 +747,7 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
>> } else if (dwc->hsphy_interface &&
>> !strncmp(dwc->hsphy_interface, "ulpi", 4)) {
>> reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
>> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
>> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg);
>> } else {
>> /* Relying on default value. */
>> if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI))
>> @@ -800,7 +804,35 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
>> if (dwc->dis_u2_freeclk_exists_quirk || dwc->gfladj_refclk_lpm_sel)
>> reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS;
>>
>> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
>> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg);
>> +
>> + return 0;
>> +}
>> +
>> +/**
>> + * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
>> + * @dwc: Pointer to our controller context structure
>> + *
>> + * Returns 0 on success. The USB PHY interfaces are configured but not
>> + * initialized. The PHY interfaces and the PHYs get initialized together with
>> + * the core in dwc3_core_init.
>> + */
>> +static int dwc3_phy_setup(struct dwc3 *dwc)
>> +{
>> + int i;
>> + int ret;
>> +
>> + for (i = 0; i < dwc->num_ss_ports; i++) {
>> + ret = dwc3_ss_phy_setup(dwc, i);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + ret = dwc3_hs_phy_setup(dwc, i);
>> + if (ret)
>> + return ret;
>> + }
>>
>> return 0;
>> }
>> @@ -839,17 +871,25 @@ static void dwc3_clk_disable(struct dwc3 *dwc)
>>
>> static void dwc3_core_exit(struct dwc3 *dwc)
>> {
>> + int i;
>> +
>> dwc3_event_buffers_cleanup(dwc);
>>
>> usb_phy_set_suspend(dwc->usb2_phy, 1);
>> usb_phy_set_suspend(dwc->usb3_phy, 1);
>> - phy_power_off(dwc->usb2_generic_phy);
>> - phy_power_off(dwc->usb3_generic_phy);
>> +
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + phy_power_off(dwc->usb2_generic_phy[i]);
>> + phy_power_off(dwc->usb3_generic_phy[i]);
>> + }
>>
>> usb_phy_shutdown(dwc->usb2_phy);
>> usb_phy_shutdown(dwc->usb3_phy);
>> - phy_exit(dwc->usb2_generic_phy);
>> - phy_exit(dwc->usb3_generic_phy);
>> +
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + phy_exit(dwc->usb2_generic_phy[i]);
>> + phy_exit(dwc->usb3_generic_phy[i]);
>> + }
>>
>> dwc3_clk_disable(dwc);
>> reset_control_assert(dwc->reset);
>> @@ -1085,6 +1125,7 @@ static int dwc3_core_init(struct dwc3 *dwc)
>> unsigned int hw_mode;
>> u32 reg;
>> int ret;
>> + int i, j;
>>
>> hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
>>
>> @@ -1119,14 +1160,27 @@ static int dwc3_core_init(struct dwc3 *dwc)
>>
>> usb_phy_init(dwc->usb2_phy);
>> usb_phy_init(dwc->usb3_phy);
>> - ret = phy_init(dwc->usb2_generic_phy);
>> - if (ret < 0)
>> - goto err0a;
>>
>> - ret = phy_init(dwc->usb3_generic_phy);
>> - if (ret < 0) {
>> - phy_exit(dwc->usb2_generic_phy);
>> - goto err0a;
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + ret = phy_init(dwc->usb2_generic_phy[i]);
>> + if (ret < 0) {
>> + /* clean up prior initialized HS PHYs */
>> + for (j = 0; j < i; j++)
>> + phy_exit(dwc->usb2_generic_phy[j]);
>> + goto err0a;
>> + }
>> + }
>> +
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + ret = phy_init(dwc->usb3_generic_phy[i]);
>> + if (ret < 0) {
>> + /* clean up prior initialized SS PHYs */
>> + for (j = 0; j < i; j++)
>> + phy_exit(dwc->usb3_generic_phy[j]);
>> + for (j = 0; j < dwc->num_ports; j++)
>> + phy_exit(dwc->usb2_generic_phy[j]);
>> + goto err0a;
>> + }
>> }
>>
>> ret = dwc3_core_soft_reset(dwc);
>> @@ -1136,15 +1190,19 @@ static int dwc3_core_init(struct dwc3 *dwc)
>> if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD &&
>> !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) {
>> if (!dwc->dis_u3_susphy_quirk) {
>> - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
>> - reg |= DWC3_GUSB3PIPECTL_SUSPHY;
>> - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
>> + for (i = 0; i < dwc->num_ss_ports; i++) {
>> + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(i));
>> + reg |= DWC3_GUSB3PIPECTL_SUSPHY;
>> + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), reg);
>> + }
>> }
>>
>> if (!dwc->dis_u2_susphy_quirk) {
>> - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
>> - reg |= DWC3_GUSB2PHYCFG_SUSPHY;
>> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
>> + reg |= DWC3_GUSB2PHYCFG_SUSPHY;
>> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
>> + }
>> }
>> }
>>
>> @@ -1168,13 +1226,25 @@ static int dwc3_core_init(struct dwc3 *dwc)
>>
>> usb_phy_set_suspend(dwc->usb2_phy, 0);
>> usb_phy_set_suspend(dwc->usb3_phy, 0);
>> - ret = phy_power_on(dwc->usb2_generic_phy);
>> - if (ret < 0)
>> - goto err2;
>>
>> - ret = phy_power_on(dwc->usb3_generic_phy);
>> - if (ret < 0)
>> - goto err3;
>> +
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + ret = phy_power_on(dwc->usb2_generic_phy[i]);
>> + if (ret < 0) {
>> + for (j = 0; j < i; j++)
>> + phy_power_off(dwc->usb2_generic_phy[j]);
>> + goto err2;
>> + }
>> + }
>> +
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + ret = phy_power_on(dwc->usb3_generic_phy[i]);
>> + if (ret < 0) {
>> + for (j = 0; j < i; j++)
>> + phy_power_off(dwc->usb3_generic_phy[j]);
>> + goto err3;
>> + }
>> + }
>>
>> ret = dwc3_event_buffers_setup(dwc);
>> if (ret) {
>> @@ -1297,10 +1367,12 @@ static int dwc3_core_init(struct dwc3 *dwc)
>> return 0;
>>
>> err4:
>> - phy_power_off(dwc->usb3_generic_phy);
>> + for (i = 0; i < dwc->num_ports; i++)
>> + phy_power_off(dwc->usb3_generic_phy[i]);
>>
>> err3:
>> - phy_power_off(dwc->usb2_generic_phy);
>> + for (i = 0; i < dwc->num_ports; i++)
>> + phy_power_off(dwc->usb2_generic_phy[i]);
>>
>> err2:
>> usb_phy_set_suspend(dwc->usb2_phy, 1);
>> @@ -1309,8 +1381,11 @@ static int dwc3_core_init(struct dwc3 *dwc)
>> err1:
>> usb_phy_shutdown(dwc->usb2_phy);
>> usb_phy_shutdown(dwc->usb3_phy);
>> - phy_exit(dwc->usb2_generic_phy);
>> - phy_exit(dwc->usb3_generic_phy);
>> +
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + phy_exit(dwc->usb2_generic_phy[i]);
>> + phy_exit(dwc->usb3_generic_phy[i]);
>> + }
>>
>> err0a:
>> dwc3_ulpi_exit(dwc);
>> @@ -1319,6 +1394,38 @@ static int dwc3_core_init(struct dwc3 *dwc)
>> return ret;
>> }
>>
>> +static int dwc3_get_multiport_phys(struct dwc3 *dwc)
>> +{
>> + int ret;
>> + struct device *dev = dwc->dev;
>> + int i;
>> + char phy_name[15];
>> +
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + sprintf(phy_name, "usb2-phy_port%d", i);
>> + dwc->usb2_generic_phy[i] = devm_phy_get(dev, phy_name);
>> + if (IS_ERR(dwc->usb2_generic_phy[i])) {
>> + ret = PTR_ERR(dwc->usb2_generic_phy[i]);
>> + if (ret == -ENOSYS || ret == -ENODEV)
>> + dwc->usb2_generic_phy[i] = NULL;
>> + else
>> + return dev_err_probe(dev, ret, "usb2 phy: %s not configured\n", phy_name);
>> + }
>> +
>> + sprintf(phy_name, "usb3-phy_port%d", i);
>> + dwc->usb3_generic_phy[i] = devm_phy_get(dev, phy_name);
>> + if (IS_ERR(dwc->usb3_generic_phy[i])) {
>> + ret = PTR_ERR(dwc->usb3_generic_phy[i]);
>> + if (ret == -ENOSYS || ret == -ENODEV)
>> + dwc->usb3_generic_phy[i] = NULL;
>> + else
>> + return dev_err_probe(dev, ret, "usb3 phy: %s not configured\n", phy_name);
>> + }
>> + }
>> +
>> + return 0;
>> +}
>> +
>> static int dwc3_core_get_phy(struct dwc3 *dwc)
>> {
>> struct device *dev = dwc->dev;
>> @@ -1349,31 +1456,37 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
>> return dev_err_probe(dev, ret, "no usb3 phy configured\n");
>> }
>>
>> - dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
>> - if (IS_ERR(dwc->usb2_generic_phy)) {
>> - ret = PTR_ERR(dwc->usb2_generic_phy);
>> + if (dwc->num_ports > 1)
>> + goto get_multiport_phys;
>
> Can we avoid goto and just return dwc3_get_multiport_phys(dwc) here?
> It's easier to read IMO.
>
>> +
>> + dwc->usb2_generic_phy[0] = devm_phy_get(dev, "usb2-phy");
>> + if (IS_ERR(dwc->usb2_generic_phy[0])) {
>> + ret = PTR_ERR(dwc->usb2_generic_phy[0]);
>> if (ret == -ENOSYS || ret == -ENODEV)
>> - dwc->usb2_generic_phy = NULL;
>> + dwc->usb2_generic_phy[0] = NULL;
>> else
>> return dev_err_probe(dev, ret, "no usb2 phy configured\n");
>> }
>>
>> - dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
>> - if (IS_ERR(dwc->usb3_generic_phy)) {
>> - ret = PTR_ERR(dwc->usb3_generic_phy);
>> + dwc->usb3_generic_phy[0] = devm_phy_get(dev, "usb3-phy");
>> + if (IS_ERR(dwc->usb3_generic_phy[0])) {
>> + ret = PTR_ERR(dwc->usb3_generic_phy[0]);
>> if (ret == -ENOSYS || ret == -ENODEV)
>> - dwc->usb3_generic_phy = NULL;
>> + dwc->usb3_generic_phy[0] = NULL;
>> else
>> return dev_err_probe(dev, ret, "no usb3 phy configured\n");
>> }
>>
>> return 0;
>> +
>> +get_multiport_phys:
>> + return dwc3_get_multiport_phys(dwc);
>> }
>>
>> static int dwc3_core_init_mode(struct dwc3 *dwc)
>> {
>> struct device *dev = dwc->dev;
>> - int ret;
>> + int ret, i;
>>
>> switch (dwc->dr_mode) {
>> case USB_DR_MODE_PERIPHERAL:
>> @@ -1381,8 +1494,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
>>
>> if (dwc->usb2_phy)
>> otg_set_vbus(dwc->usb2_phy->otg, false);
>> - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE);
>> - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE);
>> + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE);
>> + phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE);
>>
>> ret = dwc3_gadget_init(dwc);
>> if (ret)
>> @@ -1393,8 +1506,10 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
>>
>> if (dwc->usb2_phy)
>> otg_set_vbus(dwc->usb2_phy->otg, true);
>> - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
>> - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST);
>> + phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST);
>> + }
>>
>> ret = dwc3_host_init(dwc);
>> if (ret)
>> @@ -1575,6 +1690,21 @@ static void dwc3_get_properties(struct dwc3 *dwc)
>> dwc->dis_split_quirk = device_property_read_bool(dev,
>> "snps,dis-split-quirk");
>>
>> +
>> + /*
>> + * If no mulitport properties are defined, default
>
> multi*
>
>> + * the port count to '1'.
>> + */
>
> Can we initialize num_ports and num_ss_ports to 1 instead of setting it
> on error (similar to how we handle other properties).
>
Hi Thinh,

Thanks for the review. On the bindings, Rob and Krzysztof have
suggested to get the num-ports and num-ss-ports by counting the
Phy-names in DT.

Since there may be many cases where the user might skip giving any Phy's
or even skip different ports in the DT if he doesn't want to use them,
can we design/refactor the below logic as follows while mandating the
fact that user must give the SS Phy's if any starting from Port-0.:

num-ss-ports = max_port_index (usb3-portX) + 1
num-ports = max (max_port_index(usb2-portX), num-ss-ports) + 1

Ex: If there are 3 ports and only 1 is SS capable and user decides to
skip port-2 HS Phy.

case-1: phy-names = "usb2-port0", "usb3-port0", "usb2-port-1"
case-2: phy-names = "usb2-port0", "usb2-port-1", "usb3-port1"

In both cases, only one SS is present, just the order is changed. (Not
sure if last few ports can be made SS Capable instead of the first ports
on any HW) ?

But according to the above formula:

In case-1 : (num-ports = 2, num-ss-ports = 1) - This is correct
In case-2: (num-ports = 2, num-ss-ports = 2) - This is wrong

I believe this covers all cases and I can read this in get_properties
function. Let me know your opinion if this design is good to proceed
further.

Regards,
Krishna,

>> + ret = device_property_read_u32(dev, "num-ports",
>> + &dwc->num_ports);
>> + if (ret)
>> + dwc->num_ports = 1;
>> +
>> + ret = device_property_read_u32(dev, "num-ss-ports",
>> + &dwc->num_ss_ports);
>> + if (ret)
>> + dwc->num_ss_ports = 1;
>> +
>> dwc->lpm_nyet_threshold = lpm_nyet_threshold;
>> dwc->tx_de_emphasis = tx_de_emphasis;
>>
>> @@ -1755,8 +1885,7 @@ static int dwc3_probe(struct platform_device *pdev)
>> struct device *dev = &pdev->dev;
>> struct resource *res, dwc_res;
>> struct dwc3 *dwc;
>> -
>> - int ret;
>> + int ret, i;
>>
>> void __iomem *regs;
>>
>> @@ -1933,17 +2062,24 @@ static int dwc3_probe(struct platform_device *pdev)
>>
>> err5:
>> dwc3_debugfs_exit(dwc);
>> +
>> dwc3_event_buffers_cleanup(dwc);
>>
>> usb_phy_set_suspend(dwc->usb2_phy, 1);
>> usb_phy_set_suspend(dwc->usb3_phy, 1);
>> - phy_power_off(dwc->usb2_generic_phy);
>> - phy_power_off(dwc->usb3_generic_phy);
>> +
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + phy_power_off(dwc->usb2_generic_phy[i]);
>> + phy_power_off(dwc->usb3_generic_phy[i]);
>> + }
>>
>> usb_phy_shutdown(dwc->usb2_phy);
>> usb_phy_shutdown(dwc->usb3_phy);
>> - phy_exit(dwc->usb2_generic_phy);
>> - phy_exit(dwc->usb3_generic_phy);
>> +
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + phy_exit(dwc->usb2_generic_phy[i]);
>> + phy_exit(dwc->usb3_generic_phy[i]);
>> + }
>>
>> dwc3_ulpi_exit(dwc);
>>
>> @@ -2025,6 +2161,7 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc)
>>
>> static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>> {
>> + int i;
>> unsigned long flags;
>> u32 reg;
>>
>> @@ -2045,17 +2182,21 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>> /* Let controller to suspend HSPHY before PHY driver suspends */
>> if (dwc->dis_u2_susphy_quirk ||
>> dwc->dis_enblslpm_quirk) {
>> - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
>> - reg |= DWC3_GUSB2PHYCFG_ENBLSLPM |
>> - DWC3_GUSB2PHYCFG_SUSPHY;
>> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
>> + reg |= DWC3_GUSB2PHYCFG_ENBLSLPM |
>> + DWC3_GUSB2PHYCFG_SUSPHY;
>> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
>> + }
>>
>> /* Give some time for USB2 PHY to suspend */
>> usleep_range(5000, 6000);
>> }
>>
>> - phy_pm_runtime_put_sync(dwc->usb2_generic_phy);
>> - phy_pm_runtime_put_sync(dwc->usb3_generic_phy);
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + phy_pm_runtime_put_sync(dwc->usb2_generic_phy[i]);
>> + phy_pm_runtime_put_sync(dwc->usb3_generic_phy[i]);
>> + }
>> break;
>> case DWC3_GCTL_PRTCAP_OTG:
>> /* do nothing during runtime_suspend */
>> @@ -2084,6 +2225,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
>> {
>> unsigned long flags;
>> int ret;
>> + int i;
>> u32 reg;
>>
>> switch (dwc->current_dr_role) {
>> @@ -2104,17 +2246,21 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
>> break;
>> }
>> /* Restore GUSB2PHYCFG bits that were modified in suspend */
>> - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
>> - if (dwc->dis_u2_susphy_quirk)
>> - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i));
>> + if (dwc->dis_u2_susphy_quirk)
>> + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
>>
>> - if (dwc->dis_enblslpm_quirk)
>> - reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
>> + if (dwc->dis_enblslpm_quirk)
>> + reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
>>
>> - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
>> + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg);
>> + }
>>
>> - phy_pm_runtime_get_sync(dwc->usb2_generic_phy);
>> - phy_pm_runtime_get_sync(dwc->usb3_generic_phy);
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + phy_pm_runtime_get_sync(dwc->usb2_generic_phy[i]);
>> + phy_pm_runtime_get_sync(dwc->usb3_generic_phy[i]);
>> + }
>> break;
>> case DWC3_GCTL_PRTCAP_OTG:
>> /* nothing to do on runtime_resume */
>> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
>> index 8f9959ba9fd4..2f82eda9d44f 100644
>> --- a/drivers/usb/dwc3/core.h
>> +++ b/drivers/usb/dwc3/core.h
>> @@ -35,6 +35,9 @@
>>
>> #define DWC3_MSG_MAX 500
>>
>> +/* Number of ports supported by a multiport controller */
>> +#define MAX_PORTS_SUPPORTED 4
>> +
>> /* Global constants */
>> #define DWC3_PULL_UP_TIMEOUT 500 /* ms */
>> #define DWC3_BOUNCE_SIZE 1024 /* size of a superspeed bulk */
>> @@ -1023,8 +1026,10 @@ struct dwc3_scratchpad_array {
>> * @usb_psy: pointer to power supply interface.
>> * @usb2_phy: pointer to USB2 PHY
>> * @usb3_phy: pointer to USB3 PHY
>> - * @usb2_generic_phy: pointer to USB2 PHY
>> - * @usb3_generic_phy: pointer to USB3 PHY
>> + * @num_ports: Indicates number of usb ports supported by the controller.
>
> Note that this is the total number of usb ports including the SS capable
> ones.
>
>> + * @num_ss_ports: Indicates number of ss capable ports supported by controller
>> + * @usb2_generic_phy: pointer to array of USB2 PHY's
>> + * @usb3_generic_phy: pointer to array of USB3 PHY's
>> * @phys_ready: flag to indicate that PHYs are ready
>> * @ulpi: pointer to ulpi interface
>> * @ulpi_ready: flag to indicate that ULPI is initialized
>> @@ -1157,8 +1162,10 @@ struct dwc3 {
>> struct usb_phy *usb2_phy;
>> struct usb_phy *usb3_phy;
>>
>> - struct phy *usb2_generic_phy;
>> - struct phy *usb3_generic_phy;
>> + u32 num_ports;
>> + u32 num_ss_ports;
>> + struct phy *usb2_generic_phy[MAX_PORTS_SUPPORTED];
>> + struct phy *usb3_generic_phy[MAX_PORTS_SUPPORTED];
>>
>> bool phys_ready;
>>
>> diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
>> index 039bf241769a..ea86ff01433b 100644
>> --- a/drivers/usb/dwc3/drd.c
>> +++ b/drivers/usb/dwc3/drd.c
>> @@ -327,7 +327,7 @@ static void dwc3_otg_device_exit(struct dwc3 *dwc)
>>
>> void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
>> {
>> - int ret;
>> + int ret, i;
>> u32 reg;
>> int id;
>> unsigned long flags;
>> @@ -386,9 +386,11 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
>> } else {
>> if (dwc->usb2_phy)
>> otg_set_vbus(dwc->usb2_phy->otg, true);
>> - if (dwc->usb2_generic_phy)
>> - phy_set_mode(dwc->usb2_generic_phy,
>> - PHY_MODE_USB_HOST);
>> + for (i = 0; i < dwc->num_ports; i++) {
>> + if (dwc->usb2_generic_phy[i])
>> + phy_set_mode(dwc->usb2_generic_phy[i],
>> + PHY_MODE_USB_HOST);
>> + }
>> }
>> break;
>> case DWC3_OTG_ROLE_DEVICE:
>> @@ -400,8 +402,8 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
>>
>> if (dwc->usb2_phy)
>> otg_set_vbus(dwc->usb2_phy->otg, false);
>> - if (dwc->usb2_generic_phy)
>> - phy_set_mode(dwc->usb2_generic_phy,
>> + if (dwc->usb2_generic_phy[0])
>> + phy_set_mode(dwc->usb2_generic_phy[0],
>> PHY_MODE_USB_DEVICE);
>> ret = dwc3_gadget_init(dwc);
>> if (ret)
>> --
>> 2.39.0
>>
>
> No major issue I see here. Just some minor nits. Once you feel it's
> ready, please drop the RFC tags on resubmission.

\
 
 \ /
  Last update: 2023-03-26 23:47    [W:0.162 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site