lkml.org 
[lkml]   [2023]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 11/12] phy: qcom-qmp-ufs: Add HS G4 mode support to SM8450 SoC
Date
UFS PHY in SM8450 SoC is capable of operating at HS G4 mode and the init
sequence is compatible with SM8350. Hence, add the tbls_hs_g4 instance
reusing the G4 init sequence of SM8350.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index b784eed2eb1f..5cdac38c5fdc 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -942,6 +942,14 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
.serdes = sm8350_ufsphy_hs_b_serdes,
.serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
},
+ .tbls_hs_g4 = {
+ .tx = sm8350_ufsphy_g4_tx,
+ .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx),
+ .rx = sm8350_ufsphy_g4_rx,
+ .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx),
+ .pcs = sm8350_ufsphy_g4_pcs,
+ .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
+ },
.clk_list = sm8450_ufs_phy_clk_l,
.num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l),
.vreg_list = qmp_phy_vreg_l,
--
2.25.1
\
 
 \ /
  Last update: 2023-03-26 23:41    [W:0.112 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site